• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.327-335
• /
• 2014

In this paper, we propose a group distributed dynamic address assignment scheme suitable for tactical mobile ad hoc networks(MANET). Efficient address assignment is an important issue in the MANET because a node may frequently leave the current network and join another network owing to the mobility of the node. The conventional schemes do not consider the features of the tactical networks: existence of a leader node and network activity on a group basis. Thus, they may not be suitable for military operations. In our proposed scheme, called grouped units dynamic address assignment protocol(G-DAAP), a leader node maintains the address information for the members in the network and any of the nodes can exploit the information for the assignment or request of the IP address by a simple message exchange procedure. This leads to fast address assignment with small overheads. In addition, G-DAAP based on the modified IEEE 802.11e Enhanced Distributed Channel Access(EDCA) can assign addresses more quickly. We describe the delay performance of the G-DAAP and compare it with conventional schemes by numerical analysis and computer simulations. The results show that the G-DAAP significantly improves the delay performance as compared with the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2191-2204
• /
• 1997

An efficient packet transmit scheduling algorithm should be able to allocate the resource to each connection fairly based on the bandwidth and quality of service requirements negotiated during the call admission procedure and it should be able to isolate the effects of users that are behaving badly. In this paper, we propose an effective round-robin packet transmit scheduling mechanism, which we call the delay tolerant packet reserving scheme (DTPRS) based on delay QoS requirments. The proposed scheme can not only provide fairness and but also reduce delay, delay variation, and packet loss rate by reserving output link time slots of delay tolerant packets and assigning the reserved slotsto delay urgent packets. Our scheme is applicable to high speed networks including ATM network because it only requires O(1) work to process a packet, and is simple enough to implement.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.227-231
• /
• 2005

We have developed a microsystem with a capillary electrophoresis (CE) and an electrochemical detector (ECD). The microfabricated CE-ECD systems are adequate for a disposable type and the characteristics are optimized for an application to the electrochemical detection. The system was realized with polydimethylsiloxane (PDMS)-glass chip and indium tin oxide electrode. The injection and separation channels (80 um wide$\ast$40 um deep) were produced by moulding a PDMS against a microfabricated master with relatively simple and inexpensive methods. A CE-ECD systems were fabricated on the same substrate with the same fabrication procedure. The surface of PDMS layer and ITO-coated glass layer was treated with UV-Ozone to improve bonding strength and to enhance the effect of electroosmotic flow. For comparing the performance of the ITO electrodes with the gold electrodes, gold electrode microchip was fabricated with the same dimension. The running buffer was prepared by 10 mM 2-(N-morpholino)ethanesulfonic acid (MES) titrated to PH 6.5 using 0.1 N NaOH. We measured olectropherograms for the testing analytes consisted of catechol and dopamine with the different concentrations of 1 mM and 0.1 mM, respectively. The measured current peaks of dopamine and catechol are proportional to their concentrations. For comparing the performance of the ITO electrodes with the gold electrodes, electropherograms was measured for CE-ECD device with gold electrodes under the same conditions. Except for the base current level, the performances including sensitivity, stability, and resolution of CE-ECD microchip with ITO electrode are almost the same compared with gold electrode CE-ECD device. The disposable CE/ECD system showed similar results with the previously reported expensive system in the limit of detection and peak skew. When we are using disposable microchips, it is possible to avoid polishing electrode and reconditioning.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.127-135
• /
• 2010

In motion adaptive temporal noise reduction filtering used for reducing video noises, the strength of motion adaptive temporal filtering should be carefully controlled according to temporal movement. This paper presents a motion adaptive temporal filtering scheme based on least-square training. Each pixel is classified to a specific class code according to temporal movement, and then, an iterative least-square training method is applied for each class code to find optimal filtering coefficients. The iterative least-square training is an off-line procedure, and the trained filter coefficients are stored in a lookup table (LUT). In actual noise reduction filtering operation, after each pixel is classified by temporal movement, simple filtering operation is applied with the filter coefficients stored in the LUT according to the class code. Experiment results show that the proposed method efficiently reduces video noises without introducing blurring.

• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.9-16
• /
• 1996

For the determination of radiostrontium, $^{89}Sr\;and\;^{90}Sr$ in environmental soil sample, a solvent extraction method for the separation of Ca and Sr from matrix using crown ether was investigated. In comparison with the existing fuming nitric acid method, the extraction method showed high chemical yield of strontium and provided simple and rapid analytical steps. The new analytical method applied to the determination of radiostrontium in some soil sample around a nuclear power station to show that the analytical procedure is readily applicable to the practical radioactivity monitoring.

• Journal of Periodontal and Implant Science
• /
• v.46 no.5
• /
• pp.329-336
• /
• 2016

Purpose: The aim of this study was to clinically assess the impact of a prefabricated implant-retained stent clipped over healing abutments on the preservation of keratinized mucosa around implants after implant surgery, and to compare it with horizontal external mattress sutures. Methods: A total of 50 patients were enrolled in this study. In the test group, a prefabricated implant-retained stent was clipped on the healing abutment after implant surgery to replace the keratinized tissue bucco-apically. In the control group, horizontal external mattress sutures were applied instead of using a stent. After the surgical procedure, the width of the buccal keratinized mucosa was measured at the mesial, middle, and distal aspects of the healing abutment. The change in the width of the buccal keratinized mucosa was assessed at 1 and 3 months. Results: Healing was uneventful in both groups. The difference of width between baseline and 1 month was $-0.26{\pm}0.85mm$ in the test group, without any statistical significance (P=0.137). Meanwhile, the corresponding difference in the control group was $-0.74{\pm}0.73mm$ and it showed statistical significance (P<0.001). The difference of width between baseline and 3 months was $-0.57{\pm}0.97mm$ in the test group and $-0.86{\pm}0.71mm$ in the control group. These reductions were statistically significant (P<0.05); however, there was no difference between the 2 groups. Conclusions: Using a prefabricated implant-retained stent was shown to be effective in the preservation of the keratinized mucosa around implants and it was simple and straightforward in comparison to the horizontal external mattress suture technique.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.349-353
• /
• 2007

Mucocele is a clinical term of the localized superficial mucosal swelling caused by salivary retention after the obstruction or the rupture of minor salivary ducts. Various treatment methods have been suggested to lower its recurrence rate, including complete excision of lesion Biopsy punch can be used easily and simply for complete excision of mucocele. It has several advantages, such as convenience in use, low bleeding tendency, and nearly no requirements for post-operative management. In this case, biopsy punch was used for the removal of mucocele in an uncooperative child, which enable fast, simple and safe procedure, with a good result.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.3
• /
• pp.152-157
• /
• 2016

Purpose: Operating room management is the serious and complex task for hospital managers and the common approach is to develop relevant standard operational procedures. From patient and staff safety perspective, operating room management should be well-studied and hospital should identify and address any potential risks. Simultaneous usage of different imaging and less-invasive treatment technologies demands strong management control. Materials and Methods: We have formed the multidisciplinary expert panel (surgeons, anesthesiologists, radiologists, healthcare managers etc.) for hybrid theater management standard operational procedure development. On the first stage the general concept of hybrid room design and patient routing was developed. The second stage included the technical details discussion. For patient safety improvement we modified the Surgical Safety Check-list in accordance with potential MRI-related safety challenges and concerns. Results: WHO Surgical Safety Checklist is a simple and easy-to use tool which includes three blocks of question (grouped by the surgery process). We have developed two additional blocks of questions for the intraoperative magnetic resonance investigation. It is very important to have a special detailed routing with a strong control of ferromagnetic devices and anesthesiology care. Conclusion: High-energy MRI (1.5-3.0T) is characterized by potential influence on patient and staff safety in case of hybrid surgery. It is obvious to have a strong managerial control of ferromagnetic devices and anesthesiology care. Surgical Safety Checklist is the validated tool for improving patient safety. Modification and customization of this check-list potentially provides the opportunity for surgery processes improving.

• Journal of Plant Biotechnology
• /
• v.30 no.2
• /
• pp.207-214
• /
• 2003

This study was carried out to establish a novel bioassay system for screening of compounds affecting aromatic amino acid or anthocyanin biosynthesis through investigating a degree of sucrose-induced anthocyanin formation such as size of plant material, buffer conditions, light intensity and irradiated duration, incubation temp., etc were determined and standard procedure (suitable experimental condition) was set up as follows. The second leaf blade of white corn seeding induced by fluridone treatment were segmented into a size of 5${\times}$5 min. The segments were floated on the solution of 1% sucrose in 1.0mM MES buffer (pH6.0∼6.5) and incubated at 26$^{\circ}C$ for 2days under the continuous light condition(70∼100$\mu$mol m$^{-2}$ s$^{-1}$ ). Anthocyanin in the purpled tissues was extracted with methanol containing 1% HCl and the optical density of the clear supematants was determined at 528mm. Influences of some chemicals were tested using this system. Glyphosate, 5-enolpyruvylshikimate 3-phosphate synthase inhibitor, showed most sensitive response with I$_{50}$ value at 3.3$\mu$M. Dicyclohexylcarbodiimide(DCCD) and parachloromercuribenzenesulfonic acid(PCMBS) had a relatively strong ingibition with I50 value at 7.1$\mu$M and 10.2$\mu$M, respectively. These results show that sucrose-induced anthocyanin formation in white com leaf segment provide a very simple and rapid system for searching new compounds affecting aromatic amino acid or anteocyanin biosynthesis by screening at less than 10$\mu$M.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.311-313
• /
• 2005

Generally, many Asian women tend to dislike the square jaw, as they believe it makes the face look wider, giving a stubborn and strong impression. Contouring of the mandible is therefore a relatively common aesthetic procedure among Asians. These days, the use of botulinum toxin for contouring of the lower face offer simple alternative to surgery. Motor point, which is the site over a muscle where its contraction may be elicited by a minimal intensity short duration electrical stimulus, is the optimal injection point of botulinum toxin. Study was undertaken to identify the location of motor point of the masseter muscle and the skin surface landmark. First, the thickest point of the masseter muscle was inspected through palpation and inspection by 3 different individual plastic surgeons and then compound muscle action potentials(CMAPs) of masseter muscle in 15 health volunteers were recorded using EMG. For the localization of the measured points, line between lateral canthus to the mandibular angle was used. Location of motor points were mapped to skin surface from lateral canthus in a percentage of the distance along the landmark line and in distance in millimeters. The clinical injection point was located at 71.69 percentile and 7.3 mm of the landmark line. The motor point test was located at 72.54 percentile and 7.1 mm of the landmark line. The depth of motor point was 16mm. There was no statistically significant difference between the clinical injection point and the motor point. We conclude that surface mapping of motor point of the masseter muscle would increase accessibility and accuracy in botulinum toxin injection for contouring of the lower face.