• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2012

Unilateral cleft lip is not a simple and independent problem in all aspects. nasal deformity results from the cleft lip, maxillary hypoplasia, and abnormal muscular pull on the nasal structures, including abnormal muscular tension on the alar base and abnormal position of the orbicularis oris muscle. Its gross and histopathologic characteristics include widening of the alar base, a midline deviation of the columella and septum to the noncleft side, dorsal displacement of the dome, lateral rotation of medial crura, buckling of the alar cartilage, and underdevelopment of the pyriform aperture. Since Dr. Millard first presented his method for repair of the unilateral cleft lip and nasal deformity in 1955, no other technique has gained as much popularity as the rotation-advancement principle. Principles established more than 50 years ago and techniques are evolving continuously. Unlike earlier procedures, this repair gives the surgeon the opportunity to manipulate the individual cleft elements through various modifications while maintaining Millard's original surgical and anatomical goals. Although this strategy is applied worldwide, successful execution is variable and highly operator dependent. Millard and many other surgeons have made technical variations to adjust the procedure to each specific patient, to address some of its faults, and to gain new advantages. We will review the Mulliken's modifications that Dr. Millard made to his original rotation-advancement principle and inform cases applied modifying the rotation-advancement principle.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.133-140
• /
• 2003

The sandwich plate has been widely used as an efficient structural member because it has high strength-to-weight and high stiffness-to-weight ratios. To properly design the aluminum extrusion plate , it is necessary to analyze structural behaviors of the extrusions, however, the aluminum extrusions have been rarely studied until now. In the optimization process through numerous iterative calculations, finite element analysis of the sandwich plate with hollow core section requires a considerable amount of computation time and cost. In this paper, the aluminum extrusion plate with truss-core is transformed into an equivalent homogeneous orthotropic plate with appropriate elastic constants. The procedure to evaluate accurate equivalent elastic constants is also established. Using these elastic constants, simple theoretical formulas of the stresses and deflection are proposed in case of the simply-supported orthotropic thick plate under uniform pressure. Through the comparison with the results by commercial FEM code(ANSYS), it is verified that the proposed simpified formula has a good efficiency and accuracy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.353-360
• /
• 2010

In this paper, an efficient algorithm is established in order to estimate the plastic properties of power-law hardening bulk specimen materials with one simple spherical indentation impression test. This work is based on a new formulation of representative strain and, therefore, compare to the preceding approaches the fitting parameters are significantly reduced. Moreover, the new definition of representative strain endowed more physical meaning to the representative strain. In order to verify the reliability of the reverse analysis, we have studied a broad set of materials whose property ranges cover essentially all engineering metals and alloys. Based on the indentation force-displacement P-${\delta}$ curves obtained from numerical simulations, the characteristics of the indentation response and material elastoplastic properties are bridged via explicit functions. Next, through the procedure of reverse analysis the yield stress and power-law hardening exponent of bulk specimen materials can be determined. Finally, good agreement between the result from reverse analysis and initial input data from experiment can be observed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.96-104
• /
• 2011

A halftoning method is used to obtain a binary image visually similar to a continuous gray-level image through the image output devices employing the limited number of gray-levels. As a halftoning method, the error diffusion method is widely used in various applications because of its low computational complexity and good image quality. However, this method weakens the edge in the process of error diffusion to the neighboring pixels. In this case, degradation of the edge quality and damage of the vivid image is expected. To solve these problems, the proposed method determines the adaptive error filter considering the error information of the present pixel and edge distribution of the neighbor pixels. Compared with the conventional methods for enhancing edges, the proposed method involves relatively a few process resources because of its simple procedure, still considerably improving the edges in the halftone image. To evaluate the objective image quality, the performance of the proposed method is compared with that of the conventional method in terms of the edge correlation and the local average accordance.

• Journal of Environmental Health Sciences
• /
• v.42 no.5
• /
• pp.302-313
• /
• 2016

Objectives: This study was conducted to assess environmental health status on a local scale using environmental health-related indicators. It demonstrated the possibility of using a structural equation model, a methodological approach to provide synthesized information. Methods: Eighteen indicators were selected from official statistical data published by local governments. Each environmental health-related indicator was classified according to the PSR (pressure-state-response) model. Aggregation methods were performed using principal component analysis and fuzzy sets. Results: The five principal components were classified through principal component analysis (PCA) and obtained eigenvalues >1.0 from the initial 18 indicators. The aggregated index was obtained by condensing the original information into two broad and simple categories through fuzzy sets. Conclusion: This could be useful in that the aggregation procedure may provide a basis for establishing environmental health policies and a decision-making process. However, the availability and quality of indicators, assessment of aggregation method bias, choice of weighted scores for indicators, and other factors should be examined in future studies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.60-66
• /
• 2015

Screw loosening and screw fracture of abutment is one of most frequent mechanical complications in implant restoration. Fractured fragments in implant restoration like abutment and screw should be completely removed and the procedure needs minimal damage to the fixture of implant. In some cases, it could fail to remove fractured fragments and cause a lot of damage to the fixture of implant. These situations could render implant unusable at the worst. This article describes three different situations and simple techniques for successful removal of fractured fragments without damage of implants. The procedures used are described in this clinical report.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.53-68
• /
• 2015

The purpose of this study is to analyze check pattern of nail art from 2011 to 2013. The results of this study are as follows; 1) Check pattern of nail art is total 257 patterns, and there are 84 argyle, 29 tartan, 24 harlequin, 24 over, 23 window-pane, 15 stitcheds, 13 hound tooth, 10 block, 10 madras, 8 gingham, 8 gradation, 7 shepherd, and 2 tattersall check patterns. Through this result, in nail art, the relatively simple patterns such as a vertical pattern, a horizontal pattern, and cross or overlap diagonal line are used more than elaborate and complex check patterns of a fibrous tissue from a weaving process. 2) In check pattern of nail art, N-affiliated color and R-affiliated color are remarkably well-used, because of the effects of argyle, tartan, window-pane, harlequin, stitched, over, and hound tooth check patterns used the most during the past three years. Especially, most tartan, harlequin, over, and hound tooth check patterns use their own special colors such as R-affiliated colors and N-affiliated colors as it is, and argyle, window-pane, stitched, and over check patterns use well by arranging N-affiliated colors and R-affiliated colors. 3) The most used expressive technique is hand painting to express check pattern in nail art, because new products related to UV gel are well launched. These materials can draw fine line that is hard to express by existing polish easily and simply, and not only have set quickly hard, so procedure time is very short, so it is compatible to draw check pattern personally, but also it is well covered, so check pattern is more clearly expressed.

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.487-494
• /
• 2017

Spinosad and spinetoram are widely used insecticides for the control of lepidopteran larvae, leaf miners, and thrips; however, they might also have low toxicity toward beneficial insects like bees. Because these pesticides are easily photolyzed by ultraviolet radiation, the QuEChERS method, with its simple pretreatment procedure, is often used for analyzing residues of spinosad and spinetoram. The present study performed a residue analysis using a modified QuEChERS method by pretreating with ammonium salt. The limit of detection (LOD) of the modified method was 0.05 mg/kg and the limit of quantification (LOQ) was 0.25 mg/kg. The coefficient of determination ($R^2$) for the calibration curve was 0.999. Also, we examined any change in the adhesion of spinosad and spinetoram on the plants depending on a spray volume. The adhesion was approximately 70% when the spray volume was increased from 60 L to 120 L per 10 a whereas the adhesion was approximately 37% when the spray volume was increased from 125 L to 250 L. This showed that the amount of adhesion decreased with the higher spray volume. The efficacy result of spinetoram was that over 90% of Frankliniella occidentalis was controlled with the application volume of 125 L per 10 a. Therefore, the result of this study indicates that control of insects is effective and sufficient with a spray volume of 125 L per 10 a in paprika cultivation facilities.

• The Journal of Korean Physical Therapy
• /
• v.27 no.5
• /
• pp.311-314
• /
• 2015

Purpose: This study attempted to determine intra-rater reliability and inter-rater reliability for measurement of foot form using the FPI-6 (Foot Posture Index) in patients with hemiplegia caused by stroke. Methods: Twenty two stroke patients were recruited into the research and their foot posture was evaluated using the FPI. Two raters assessed 6 items sequentially in accordance with the FPI-6 manual. This procedure involved asking the subject to take several steps in-place, prior to settling into a comfortable stance position with double limb support. Subjects were instructed to stand still with their arms by their sides and look straight ahead. FPI-6 values ranged from -2 to +2 for each of the six criteria and from -12 to +12 for the total score, indicating a position for each foot either along the supinated (negative score) to pronated (more than +6) continuum of foot posture. Results: The results showed that intra-rater reliability and inter-rater reliability for a total FPI-6 score was high: 0.807-0.888. An almost perfect agreement between the two raters was identified in the foot's morphological classification (Somer's D=0.712; p<0.05). Intra-percentage agreement was high (88.6%). Conclusion: The FPI-6 is a quick, simple, and reliable clinical tool with demonstrated good to excellent intra-rater reliability and good inter-rater reliability when used in assessment of the stroke patient's foot.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.7-13
• /
• 2003

Microlens arrays were fabricated using a novel fabrication technology based on the exposure of a PMMA (Polymethylmethacrylate) sheet to deep X-rays and subsequent thermal treatment. X-ray irradiation causes the decrease of molecular weight of PMMA, which in turn decreases the glass transition temperature and consequently causes a net volume increase during the thermal cycle resulting in a swollen microlens. A new physical modeling and analyses for micro lens formation were presented according to experimental procedure. A simple analysis based on the new model is found to be capable of predicting the shapes of micro lens which depend on the thermal treatment. For the replication of micro lens arrays having various diameters with different foci on the same surface, the hot embossing and the microinjection molding processes has been successfully utilized with a mold insert that is fabricated by Ni-electroplating based on a PMMA microstructure of micro lenses. Fabricated microlenses showed good surface roughness with the order of 1nm.