• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.297-301
• /
• 2009

We have developed the yttrium oxide (YNP) or ytterbium oxide (YbNP) nanoparticle/polymer matrices for the size-dependent separation of DNA ranging from 100 bp to 9,000 bp. High separation efficiency (> $10^6$ plates/m) and the baseline resolution for various DNA standards (100 bp, 500 bp, and 1 kbp DNA ladder) were obtained in 10 min with these matrices. The effects of concentrations of both polyethylene oxide (PEO) and nanoparticles were investigated and the highest performance was obtained at 0.02% PEO with 0.02% YNP or YbNP. Similar sieving power for both YNP and YbNP matrices was observed probably due to the similar sizes of nanoparticles, resulting in the formation of comparable sieving networks for DNA separation. For the reduction of electrosmotic flow, either dynamic or permanent coating of the capillary inner wall was compared and it turned out that PEO was superior to polyvinylpyrrolidone (PVP) or polyacrylamide (PAA) for better separation efficiency.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.131-132
• /
• 2011

This study analyzes the yearly-best delivered size range of truck mixer based on the specified mix, Water to Binder Ratio, aggregate proportion and unit amount with statistical method targeting on Kyeongi and Kyeongsang province and compares with the similar materials of Japan to propose as a basic standard for the quality control of mixer truck. As a result, in case of the Water to Binder Ratio of these areas, it is higher than Japan's due to the excessive safety rate reflecting the changes of differential value impact and unit amount, and the unit amount's standard deviation is very large by reflecting the changes of the amount used and chemical admixture susceptibility. In case of aggregate proportion, the frequency rate is about 50%, which is very similar value with Japan's one.

• 한국정보통신학회논문지
• /
• 제6권3호
• /
• pp.416-420
• /
• 2002

네트워크 트래픽의 연구 동향은 LAN, WAN 및 VBR 비디오 트래픽이 통계학적으로 자기 유사과정에 의해 더욱 더 잘 모델링화 된다는 사실을 입증하고 있다. 이것은 기존의 단기간 의존성만을 고려한 포아손 과정에 비해 다른 이론적 특성을 가진다. 즉 광범위한 시계열상에서 aggregation의 정도가 변하더라도 통계학적으로 동일한 특성을 지니게 된다는 것이다. 본 논문에서는 이러한 자기유사과정을 갖는 데이터를 실시간 운영중인 네트워크로부터 측정하여 트래픽을 모델링하고, 비교분석하므로서 다양한 데이터를 지원하는 초고속 네트워크의 성능분석에 적용할 수 있으리라 여겨진다.

• 한국안광학회지
• /
• 제4권1호
• /
• pp.83-88
• /
• 1999

본 연구는 한국 성인 여성에 대한 외안부 형태를 조사하기 위해 시도한 것이다. 다음과 같은 결과를 얻었다. 1. 내안각간의 거리의 최적길이는 35-36mm이다. 그러나 18-19세는 20-25세에 비해서 폭의 범위가 넓다. 2. 검열의 최적길이는 30-31mm이다. 한편 우안과 좌안은 비슷한 결과를 가진다. 3. 검열의 최적 폭은 8mm이다. 그리고 우안과 좌안은 비슷한 결과를 가진다. 4. 근거리에서 대부분의 PD는 28-31mm(76.7%)이다. 그리고 우안과 좌안은 비슷한 결과를 가진다. 5. 원거리에서 대부분의 PD는 30-33(75.8%)mm이다. 그러나 18-21세는 우안이 좌안에 비해서 길다. 6. 우성안은 거의 우안이다.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.806-813
• /
• 2013

This paper aims to compare the performance of three phase induction motor drives using Five Leg Inverter (FLI) and Three Leg Inverter (TLI) configurations. An Indirect Field Oriented Control (IFOC) method using a TLI is well established and incorporated for high performance speed drives in various industries. The FLI dual motor drive system on the other hand shows good workability in the independent control of two induction motor drives simultaneously. In this experiment, the IFOC method is utilized for both drive systems, and Space Vector Pulse Width Modulation (SVPWM) is used to generate pulses for both inverters. For the FLI, the Double Zero Sequence (DZS) Injection technique is used to generate the modulation signal. The complete experiment setup is done by using a DSpace 1103 controller board. The individual motor performances are analyzed using similar schemes, equipment setups and controller parameter values. The results show similar speed performance response capability between the single motor operation using a TLI system and the two motor operation using a FLI system based on the variable speed range either in forward or reverse operation. They also show similar load rejection abilities. However, the single motor with a TLI has a better power quality aspect such as ripple current and total harmonics distortion (THD).

• Journal of Ship and Ocean Technology
• /
• 제10권1호
• /
• pp.1-9
• /
• 2006

The resistance reduction by an air lubrication effect of a large air cavity covering the hull bottom surface and the similarity relations involved have been investigated with a series of towing tank tests of three geometrically similar models. The test results of geometrically similar models have indicated that a large air cavity was formed beneath the bottom having a backward-facing step by artificially supplying air is effective for resistance reduction. The areas of air cavity and the required flow rates of air are directly related to the effective wetted surface area. The traditional extrapolation methods seem to be applicable to the estimation of the resistance in the tested range if corrections are made to account the changes in the frictional resistance caused by the changes in the effective wetted surface area. To investigate the effectiveness of air lubrication in improving the resistance performance of a practical ship, a small test boat having a backward-facing step under its bottom has been manufactured and speed trials in a river have been performed. Air has been supplied artificially into the downstream region of the bottom step to form a large air cavity covering the bottom surface. The results have confirmed the practical applicability of air lubrication for the resistance reduction of a small high-speed boat.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권2호
• /
• pp.221-228
• /
• 2020

This study suggests an alternative to the conventional collaborative filtering method for predicting consumer choice, using case-based reasoning. The algorithm of case-based reasoning determines the similarity between the alternative sets that each subject chooses. Case-based reasoning uses the inverse of the normalized Euclidian distance as a similarity measurement. This normalized distance is calculated by the ratio of difference between each attribute level relative to the maximum range between the lowest and highest level. The alternative case-based reasoning based on similarity predicts a target subject's choice by applying the utility values of the subjects most similar to the target subject to calculate the utility of the profiles that the target subject chooses. This approach assumes that subjects who deliberate in a similar alternative set may have similar preferences for each attribute level in decision making. The result shows the similarity between comparable alternatives the consumers consider buying is a significant factor to predict the consumer choice. Also the interaction effect has a positive influence on the predictive accuracy. This implies the consumers who looked into the same alternatives can probably pick up the same product at the end. The suggested alternative requires fewer predictors than conjoint analysis for predicting customer choices.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.104-107
• /
• 2002

네트워크 트래픽의 연구 동향은 LAN, WAN 및 VBR 비디오 트래픽이 통계학적으로 자기유사과 정에 의해 더욱 더 잘 모델링화 된다는 사실을 입증하고 있다. 이것은 기존의 단기간 의존성만을 고려한 포아손 과정에 비해 다른 이론적 특성을 가진다. 즉 광범위한 시계열상에서 aggregation의 정도가 변하더라도 통계학적으로 동일한 특성을 지니게 된다는 것이 다. 본 논문에서는 이러한 자기유사과정을 갖는 데이터를 실시간 운영중인 네트워크로부터 측정하여 트래픽을 모델링하고, 비교분석하므로서 다양한 데이터를 지원하는 초고속 네트워크의 성능분석에 적용할 수 있으리라 여겨진다.

• Journal of Welding and Joining
• /
• 제22권3호
• /
• pp.69-76
• /
• 2004

Effects of friction stir welding parameters such as tool rotation speed and welding speed on the joints properties of 5052 Al alloys were studied in this study. A wide range of friction stir welding conditions could be applied to join 5052 AA alloy without defects in the weld zone except for certain welding conditions with a lower heat input. Microstructures near the weld zone showed general weld structures such as stir zone (SZ), thermo-mechanically affected zone (TMAZ) and heat affected zone (HAZ). Each zone showed the dynamically recrystallized grain, transient grain and structure similar to base metal's, respectively. Hardness distribution near the weld zone represented a similar value of the base metal under wide welding conditions. However, in case of 800 rpm of tool rotation speed, hardness of the stir zone had a higher value due to the fine grain with lots of dislocation tangle, a higher angle grain boundary and some of Al3Fe particles. Except joints with weld defects, tensile strength and elongation of the joints had values similar to the base metal values and fracture always occurred in the regions approximately 5mm away from the weld center.

• 정보처리학회논문지C
• /
• 제10C권1호
• /
• pp.51-60
• /
• 2003

네트워크를 설계하고 서비스를 구현하는데 있어서 중요한 변수중의 하나는 트래픽의 특성을 파악하는 것이나 기존의 트래픽 예측과 분석은 포아송(Poisson) 또는 마코비안(Markovian)을 기본으로 하는 모델을 사용하였다. LAN, WAN 및 VBR(Variable Bit Rate) 트래픽 특성에 관한 최근의 실험적 연구들은 기존의 포아송 가정에 의한 모델들이 네트워크 트래픽의 장기간 의존성 및 자기 유사한 특성들을 과소평가 함으로써 실제 트래픽의 특성을 제대로 나타낼 수 없다는 것을 지적해 왔고 최근 실제 트래픽과 유사한 모델로서 자기 유사한 특성을 이용한 접근법이 대두되고 있다. 따라서, 본 논문에서는 실제 트래픽과 유사한 자기 유사 데이터 트래픽을 백그라운드 부하로 발생시켜 기존의 ABR (Available Bit Rate) 혼잡제어 알고리즘 중 대표적인 EFCI(Explicit Forward Congestion Indication), EPRCA(Enhanced Proportional Rate Control Algorithm), ERICA(Explicit Rate Indication for Congestion Avoidance), NIST(National Institute of Standards and Technology) 스위치 알고리즘이 버스트한 트래픽에 대해 효율적으로 반응하는지를 ACR(Allowed Cell Rate), 버퍼 사용율, 셀 폐기율, 전송효율 등으로 나누어 분석을 하였다.