• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.35-44
• /
• 2005

In the world, most of the metal technologists were as called as adornment artists than other field of industrial arts strongly industrial characters functional materials and manufacturing technology many used in the present age. In the study, one of adornments researched and material character analyzed about Art Clay Silver. The shrinkage rate of shape was about 0.24%. A shrinking phenomenon drying time thought of evaporation of water linking bonding agents and powders. After calcination of Art Clay Silver, the EDX used that just Ag 100% analyzed a result from the surface assay in the room temperature. A binder with powder in the room temperature considered to disappear, because it was been fume and smoke at high calcined temperature. A study showed when handicrafted necklaces make by these characteristic as using in difficult and delicated operations rather than naturally and beautifully expressive products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1548-1554
• /
• 2008

The market of silver precious metal clay (PMC) is promising as its application for agile metal craft. The property of suitable hardness and shrinkage as well as environment-safe is strictly required as people make the final product with bare hands. We propose a silver PMC with new organic binder made of palm oil, glycolic acid and water. Then we prepared disk specimen of our proposed PMC and well-known commercial PMC. We investigated the hardness, weight change, linear shrinkage, density and micro structure evolution with sintering temperature of $700{\sim}900^{\circ}C$ ($50^{\circ}C$ gap) for 15minutes. We confirm our proposed PMC has suitable property for craft product comparable for commercial PMC, and the optimum sintering condition is $850^{\circ}C$-15minutes for metal craft application.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.1
• /
• pp.104-110
• /
• 2016

The transport of silver nanoparticles (AgNPs) was investigated through a column packed with sand. A series of column experiments were carried out to evaluate the effect of ionic strength (IS), pH, electrolyte type and clay mineral on mobility of polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs). The deposition of PVP-AgNPs was increased with increasing solution ionic strength and decreasing pH. Furthermore, the depositon of PVP-AgNPs was affected by the electrolyte type (NaCl vs. NaNO₃) and was shown to be greater at NaNO₃ solution. Also, the transport of PVP-AgNPs was greatly increased after the pre-deposition of clay particles on sand. Our results suggest that various environmental factors can influence the mobility of PVP-AgNPs in soil-groundwater systems and should be carefully considered in assessing their environmental risks.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.101-112
• /
• 2012

The Donggwanwangmyo Shrine was built in the period of Joseon Dynasty in 1602. There are Clay Statues (Gwanwo, Jangbi, Woojanggun, Juchang, Jojaryoung and so on) enshrined in the inside of the main hall. Original color of these Clay Statues are deteriorated by inorganic pollutant like dust. And the origanal forms were damaged during several process of restorations and repaintings. This study carried out XRD, SEM-EDS, P-XRF and chromaticity measurement for characterization of pigments which painted on Clay Statues. As a result, cinnabar, hematite and red lead were used to paint in pigments for the red and brown colors. Light red pigment was made by gypsum with these minerals that make colors. Graphite and gold were used to color of black and gold pigment, respectively. Green pigment is identified of malachite, atacamite and glauconite. Blue pigment which is clearly painted on Clay Statues is interpreted a morden industrial pigment that were painted at repair work. White pigments are detected calcite, gypsum and silver white. Orpiment and litharge were used to color of yellow and light yellow pigment.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.383-395
• /
• 2008

To enhance the grade and recovery rate of the gold/silver ores which yield at Philippine Mankayan mine, we studied the characteristics which are the geologic and mineralogical features of gold and silver ore, the liberation by crushing and grinding, the separation by sieving and shaking table. Gold/silver ore is composed of the sulfide minerals like pyrite, sphalerite, galena; and the gangue minerals which is quartz, clay. Gold/silver element are mainly contained in a sulfide minerals like pyrite, sphalerite and galena. To increase the liberation rate of sulfide minerals containing gold/silver element, the gold/silver ore has to be grounded under $100{\mu}m$ very finely because the crystal size of sulfide minerals is distributed from $1{\mu}m$ to $100{\mu}m$. The liberation rate of gold/silver ore increases to 92% when the particle size ($d_{90}$) of ore is grounded below $100{\mu}m$ by jaw crusher $\to$ cone crusher $\to$ rod mill by steps. The grade and recovery of sulfide minerals could not be enhanced by sieving separation because those crystal size is distributed homogeneously below $100{\mu}m$. But, when we separated the sieved ore using shaking table, the gold and silver grade increased to 40 ppm and 140 ppm, respectively. Then the recovery rate of gold reach almost 100% but that of silver is no more that 50%.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.58-60
• /
• 2005

기존의 금속조형물은 만드는 공정으로 주조-후처리 또는 정밀 기계가공방법은 많은 시간과 노력이 필요한 단점이 있었다. 최근에 귀금속 성형점토 (PMC)라는 마이크로 크기의 분말과 바인더가 혼합되어 마치 점토와 같이 직접 수공 또는 치공구를 이용하여 완성하고 $650-850^{\circ}C$ 정도의 저온에서 소결하여 단시간 안에 최종 조형물을 만들 수 있는 신공정이 개발된 바 있다. 본 연구에서는 선진사와 비슷한 $1{\~}3{\mu}$m급은 분말을 1:1로 혼합하고 고형 바인더를 첨부하여 기존 선진사와 동등하거나 우수한 미세조직과 표면경도를 확보하고 조형비가 있는 시작품을 만드는데 성공하였다.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.153-163
• /
• 2013

The Ogcheon Au-Ag deposit consists of two quartz veins that fill the NE or NW-trending fissures in the metasedimentary rocks of unknown age. The quartz veins occur mainly in the massive type with partially breccia and cavity. They can be found along the strike for about minimum 50 m and varied in thickness from 0.1 to 0.3 m. The mineralogy of quartz veins from the Ogcheon deposit is mainly composed of hydrothermal alteration minerals such as pyrite, quartz, sericite, chlorite, clay minerals and sulfides including pyrite, pyrrhotite, arsenopyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of mineralization range from 184 to $362^{\circ}C$ and from 0.0 to 6.6 wt.% eq. NaCl, respectively. These suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur(${\delta}^{34}S$: 0.4~8.4‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen(${\delta}^{18}O$: 4.9~12.1‰) and hydrogen(${\delta}D$: -92~-74‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Ogcheon deposit and then overlapped to some degree with another type of meteoric water during mineralization.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.169-187
• /
• 2023

Aggregates from 84 cities and counties in Korea were tested for quality to allow analysis of the physical characteristics of aggregates from river, land, and forest environments. River and land aggregates were analyzed for 18 test items, and forest aggregates for 12 test items. They were classified according to watershed and geology, respectively. The observed physical characteristics of the river aggregates by basin were as follows: aggregates from the Geum River basin passed through 2.5, 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; clay lumps constituted the Nakdong River basin material; aggregates from the Seomjin River basin passed through 10, 5, and 2.5 mm sieves; those from the Youngsang River basin passed through 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; and aggregates from the Han River basin passed through 10, 5, 2.5, 1.2, 0.6, 0.3, and 0.08 mm sieves, Stability; Standard errors were analyzed for the average amount passing through 10, 0.6, and 0.08 mm silver sieves, and performance rate showed different distribution patterns from other physical characteristics. Analysis of variance found that 16 of the 18 items, excluding the absorption rate and the performance rate, had statistically significant differences in their averages by region. Considering land aggregates by basin, those from the Nakdong River basin excluding the Geum River basin had clay lumps, those from the Seomjin River basin had 10 and 5 mm sieve passage, aggregates from the Youngsang River basin had 0.08 mm sieve passage, and those from the Han River basin had 10, 0.6, and 0.08 mm sieve passage. The standard error of the mean of the quantity showed a different distribution pattern from the other physical characteristics. Analysis of variance found a statistically significant difference in the average of all 18 items by region. Analyzing forest aggregates by geology showed distributions of porosity patterns different from those of other physical characteristics in metamorphic rocks (but not igneous rocks), and distributions of wear rate and porosity were different from those of sedimentary rocks. There were statistically significant differences in the average volume mass, water absorption rate, wear rate, and Sc/Rc items by lipid.