• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1597-1599
• /
• 1996

In this study, we investigated the electrical characteristics such as tracking resistance, dielectric constant, insulating resistance, and arc resistance, of silicone rubber for outdoor use, and, focused on the tracking resistance. In the Inclined Plane Test, two kind of the contamination solutions were used, and their phenomena were observed. The average leakage current and the tracking breakdown time decreased, and erosion rate increased, using anionic surfactant added contaminant solution. The dielectric constant and dissipation factor were increased with increasing temperature.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.347-353
• /
• 2010

목적: 소프트콘택트렌즈 관리용액에 의한 balafilcon A 재질의 실리콘 하이드로겔렌즈에 부착된 지방 침전물 제거효과를 비교하였다. 방법: Balafilcon A 재질의 실리콘 하이드로겔렌즈를 실험실 조건에서 oleic acid, oleic acid methyl ester, cholesterol이 포함된 식염수에 담가 24시간 동안 오염시켰다. 오염된 콘택트렌즈는 식염수로 헹구어준 후 계면활성세척액, 알콜 성분이 포함된 세척액 및 다목적용액으로 각각 세척하였고, 반복적인 오염과 세척효과를 관찰하기 위해서는 오염과 세척과정을 14회 반복하였다. 초음파의 지방침전물 세척 효과를 관찰하기 위하여 오염된 렌즈에 초음파처리를 한 후 처리하지 않은 렌즈와 비교하였다. 지방침전물은 methanol:chloroform (1:1, v/v) 용액으로 추출하고 고성능액체크로마토그래피로 분석하여 정량하였다. 결과: 실리콘 하이드로겔렌즈의 지방세척효과는 알콜성분을 함유한 세척액이 계면활성세척액 및 다목적용액보다 높았으며, 초음파를 함께 처리해준 경우에는 세척 효과가 상승하였다. 콘택트렌즈 관리용액으로 세척한 후에도 지방침전물은 완전히 제거되지 않아 오염과 세척을 반복한 경우 지방 침전물의 양은 지속적으로 증가하였다. 결론: 실리콘 하이드로겔렌즈에 부착되는 지방 침전물에 대한 소프트 콘택트렌즈용 관리용액의 세척효과는 만족할 수준에 미치지 못하기 때문에 실리콘 하이드로겔렌즈의 지방 침전물 제거에 적합한 세척액의 개발이 필요할 것으로 사료된다.

• 공업화학
• /
• 제10권6호
• /
• pp.809-813
• /
• 1999

D상 유화법을 적용하고 상도를 이용하여 유화메커니즘을 설명하였다. D상 유화작용은 등방성 계면활성제 용액의 형성과 함께 시작되며 계면활성제 용액에 octamethyl cyclotetrasiloxane(OMCS)의 분산으로 계면활성제중 오일(O/D) 겔 유화물의 형성에 의해 진행된다. 폴리올은 이 실험목적상 필수성분이다. 폴리올의 기능을 이해하기 위해 비이온 계면활성제/오일/물/폴리올계의 용액거동을 폴리옥시에틸렌올레일에테르/OMCS/프로필렌글리콜(PG)의 수용액인 3성분의 상도를 이용하여 조사하였다. 등방성 계면활성제상에서 오일의 용해도는 PG를 가함에 따라 증가하였다. D상 유화물은 OMCS의 농도가 70~90% 범위에서와 계면장력이 2.0~3.0 dyne/cm 범위에서만 형성되었으며, D상 유화물은 $10{\mu}m$ 정도 크기의 균일한 구상으로 O/W 형이었다.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.238-243
• /
• 2014

합성된 스테인레스 스틸에 대한 NATM(New Austria Tunnel Method) 수지의 기계적 특성은 SEM, FT-IR, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스 등의 금속에 코팅하는 무용제 도료를 합성하였다. 폴리올, IPDI, 충진제, 실리콘 계면활성제, 촉매 등이 함유된 기존 NATM수지보다 폴리올, MDI, 충진제, 실리콘 계면활성제, 촉매, 가교제가 함유되어 합성된 NATM 수지의 도료가 내구력과 강도가 양호하였다. 견고한 NATM 수지의 기계적 특성은 가교와 [NCO]/[OH]의 mole%가 증가함에 따라 강도가 증가하였다. 결론적으로 NATM의 가교된 미세조직는 스테인레스 스틸 같은 금속물질 코팅에 좋은 물질이다.

• 대한화장품학회지
• /
• 제42권1호
• /
• pp.15-28
• /
• 2016

유중 수형 에멀젼은 우수한 수분 증발 차단력 및 통기성 밀폐막 형성 등의 장점에도 불구하고 저점도 안정화가 쉽지 않아 다양한 화장품 제형 적용에 한계성을 지녀왔다. 본 연구에서는 유중 수형 에멀젼 형성에 있어 비이온성 유화제와 분체, 양이온성 유화제 간의 상호 관계가 제형의 안정성에 미치는 영향을 규명하였다. 비이온성 유화제와 분체 존재 하에 양이온 유화제의 농도가 증가함에 따라 초기에는 유화 안정성이 향상되다가 일정 농도 이상에서는 하락되고, 더욱 농도가 증가하면 전상이 일어나는 경향성이 관찰되었다. 이를 통해, 비이온성 유화제 1.0 ~ 4.0 wt% 사용 조건에서 실리콘 계 마이크로 사이즈 분체 2.5 wt%와 양이온 유화제 0.1 ~ 0.5 wt%를 사용할 경우 흐름성 있는 범위의 점도까지(2000 ~ 5000 cps) 낮추면서도 분체의 분산성과 안정성을 효과적으로 높인 유중 수형 에멀젼의 제조가 가능함을 확인하였다.

• 폴리머
• /
• 제32권2호
• /
• pp.95-102
• /
• 2008

The $\alpha$,$omega$-diacrylate poly(dimethylsiloxane) (DA-PDMS) containing vinyl ester of versatic acid/vinyl acetate (Veova-10/VAc) was prepared by emulsion copolymerization of (DA-PDMS), Veova-10 (with VAc), and auxiliary agents at $85^{\circ}C$ in the presence of ammonium peroxodisulfate (APS) as an initiator. Sodium dodecyl sulfate (SDS) and nonylphenol ethylene oxide-40 units (NP-40) were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FT-IR). Thermal properties of the copolymers were studied by using thermogravimetric analysis(TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of variables such as temperature, agitation speed, surfactant kinds, molecular weights, initiator, and DA-PDMS concentrations on the properties of the silicone-containing Veova-10/VAc emulsions were examined. The calculation of monomer conversion versus time histories indicates that by increasing the DA-PDMS concentration the polymerization rate and the number of polymer particles decrease, respectively.

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.104-113
• /
• 1996

Cadmium uptake by growing and nongrowing (intact) cells of a chdmium-tolerant yeast Hansenula anomala B-7 in the presence of surfactants was studied. In growing cultures the addition of Triton X-100 or Tween 80 increased cadmium uptake by about 30% with no inhibition of cell growth, and in intact cells Triton X-100 increased cadmium accumulation by about 80% compared to surfactant-free controls. Considering balance between increased uptake and pollution, the addition of 0.1% Triton X-100 was preferable. By the mixed addition with defoamer silicone, during growth of cells Tween 80 or Triton X-100 enhanced uptake efficiency of cadmium compared to its single addition, whereas in intact biomass each of surfactants tested had no significant effect on cadmium uptake. The uptake of cadmium was observed to rise sharply to a maximum and then declined with increasing pH, and maximum accumulation of cadmium by growing and intact cells occurred at the pH of 6.0 and 7.0, respectively. A significant increase in cadmium uptake occurred with shaking culture. Cadmium uptake by growing and intact cells was almost completed during the culture time of 72 or 24 hrs, respectively. Scalded cells sorbed much more cadmium-ion than living cells.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.279-288
• /
• 2004

Liquid crystal (LC) system was introduced into W/O emulsion in order to enhance the stability and moisturizing effect. The LC system, composed of beeswax, surfactant, and water was formed on the surface of emulsion droplet, which was investigated through a polarized microscope. The phenomenon that the viscosity in W/O emulsion system is decreased with time, was reduced by the formation of LC with the addition of beeswax. Centrifugal separation test showed that the stability of emulsion system was increased with the addition of beeswax to 3%. The color change of vitamin C was delayed in LC emulsion systems, which indicates stabilization effect against the oxidation of vitamin C. Evaporation rate in W/O emulsion was retarded by LC, so that high moisturizing effect is expected in W/O LC system.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.37-44
• /
• 2003

We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.

• 한국의류학회지
• /
• 제36권11호
• /
• pp.1237-1245
• /
• 2012

The effect of hydrophilicity and hydrophobicity of PET fabric on the detergency of particulate soil were investigated as functions of the concentration of hydrophilic and hydrophobic chemicals, surfactant concentration, ionic strength, adhesion and removal time, and pH. The detergency of the particulate soil was determined by the adhesion of particles to and their removal from fabric, the PET fabric and ${\alpha}-Fe_2O_3$ were used as textile materials and for the model of particulate soil, respectively. The hydrophilic and hydrophobic finish for PET fabric was treated with a polyester, silicone and fluorine organic compound of resin respectively. The adhesion of particulate soil to fabric treated with hydrophobic chemicals were slightly higher but its removal from fabric treated with hydrophobic chemicals was largely higher than fabric treated with a hydrophilic chemical regardless of solution conditions such as the concentration of hydrophilic and hydrophobic chemicals, surfactant concentration, ionic strength, adhesion and removal time, and pH. Therefore, hydrophobic treatment for fabric had a more positive effect than the hydrophilic treatment on the detergency of particulate soil.