• 폴리머
• /
• 제25권4호
• /
• pp.528-535
• /
• 2001

본 연구에서는 polyol, MDI, 실리콘 유화제, 물을 기본 폴리우레탄 조성으로 설정하였으며, 경질 폴리우레탄 폼에 있어서 sitff-chain 요소인 에틸렌 글리콜의 첨가에 의하여 가교밀도가 증가하며, 이에 따른 셀의 크기, 발포 배율, cream time, gel time, take free time의 변화, 최종 자유 발포체 높이, 반응 온도, 단열도 변화를 관찰하였다. 발포제는 시클로펜탄을 사용하여 경질 물리우레탄을 발포하였으며, 상온, 상압에서 hand mixing 으로 5000 rpm, 4sec의 범위 안에서 혼합시킨 뒤에, 에틸렌 글리콜의 양을 변화시켜 200 ${\times}$ 200 ${\times}$ 200 mm 내의 나무 금형 안에서 발포 실험하였다. 이소시아네이트 인덱스를 고정시켰을 경우 에틸렌글리콜의 양이 증가함에 따라 셀의 크기는 약 5.1%와 열전도는 약 14%가 감소하였다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.546-567
• /
• 2015

실리콘계 계면활성제는 소수성 유기실리콘 그룹에 하나 또는 그이상의 친수성 극성그룹이 결합되어 있다. 반면에 탄화수소 계면활성제의 소수성 그룹은 탄화수소이다, 실리콘 계면활성제는 낮은 계면장력, 윤활성, 퍼짐성, 발수성, 열 안정성, 화학적 안정성 때문에 폴리우레탄 폼을 시작으로 건설재료, 화장품, 페인트잉크, 농약 등 많은 산업분야에 사용되고 있다. 다양한 응용분야에서의 요구사항을 반영하기 위한 다양한 기능을 가진 폭 넓은 화학구조를 가진 실리콘 계면활성제들이 필요하다. 본 총설에서는 소수성 폴리실록산 중추로서의 폴리디메틸실록산과 반응성 폴리실록산의 성질과 합성방법, 반응성 폴리실록산을 친수성 그룹과 결합시키는 규소수소화반응 같은 주요 반응방법, 그리고 폴리에테르, 이온성, 카보하드레이트 타입 같은 주요 고분자 실록산 계면활성제들의 합성방법을 논의한다.

• 폴리머
• /
• 제34권1호
• /
• pp.8-13
• /
• 2010

발포체의 물성은 발포체의 밀도, 사용된 폴리머의 기계적 물성과 열린 셀의 함량, 셀 크기, 셀 크기 분포, 셀 형태, 스킨층의 두께 등을 포함하는 셀 구조에 의존하며, 이러한 발포체의 밀도는 사용된 폴리머의 종류와 가교제의 농도 그리고 가공 기술 및 가공 조건과 같은 다양한 원료 물질과 가교 조건에 영향을 받는다. 본 연구에서는 폴리에스터 폴리올, MDI, 아민계 촉매, 틴계 촉매, 실리콘 유화제, 물을 기본 폴리우레탄 발포체의 조성으로 설정하였으며, 발포체에 있어서 stiff-chain 요소인 사슬 연장제의 첨가에 의하여 가교 밀도를 증가시켰다. 또한, 폴리우레탄 발포체의 기계적 물성을 높이기 위해 무기 충전제로 입자 크기와 $SiO_2$ 함량이 다른 실리카와 탈크 각각 2종류를 사용하였다. 발포체의 제조시 사슬 연장제와 무기 충전제의 종류와 함량비를 달리하면서 모듈러스, 인장 강도, 압축 강도, 경도의 물성 변화를 알아보았고, 전자현미경을 통해 셀의 크기 변화와 무기 충전제의 분포도를 관찰하였다.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.

• 폴리머
• /
• 제26권2호
• /
• pp.185-192
• /
• 2002

Polymeric 4,4'-diphenylmethane diisocyanate (PMDI), polyether polyol,1,4-butane diol, silicone surfactant와 발포제로 물을 사용하여 경질 폴리우레탄 폼 (PUF)을 제조하였다. PUF의 밀도는 0 php (parts per hundred polyol by weight)의 부탄다이올 양에 대하여 물의 양이 0.5~3.0 php로 증가함에 따라 173.7~41.7 kg/㎥로 감소하였다. PUF의 셀 크기는 10 php의 부탄다이올 양에 대하여 물의 양이 0.5~3.0 php로 증가함에 따라 115-258 $mu extrm{m}$로 증가하였다. PUF의 압축강도 측정 결과, 동일 밀도의 PUF에 대하여 압축강도는 물의 양이 증가함에 따라 증가하였다. 계면활성제가 PUF의 물성에 미치는 영향에 관한 연구에서, PUF의 셀 크기가 계면활성제 첨가량이 0~0.33 php로 증가함에 따라 360-146 $mu extrm{m}$로 감소하였으나 0.33 php 이상의 계면활성제 첨가량에 대해서는 더 이상의 셀 크기 변화가 관찰되지 않았다.

• 대한두개안면성형외과학회지
• /
• 제17권4호
• /
• pp.202-205
• /
• 2016

Background: Packing after closed reduction of nasal fracture causes uncomfortable nasal obstruction in patients. We packed the superior meatus with synthetic polyurethane foam (SPF) to support the nasal bone, and packed the middle nasal meatus with a nasal airway splint (NAS) and SPF. The aim of this article is prospectively to compare the subjective patient discomfort of SPF (Nasopore Forte plus) packing alone and SPF with NAS. Methods: We compared the prospectively subjective patient discomfort of SPF packing alone (group A) and SPF with NAS (group B) via visual analog scale (VAS; 0, no symptom; 100, most severe symptom). Results: At first postoperative day group B showed significant lower scores in dry mouth, sleep disturbance, conversation difficulty. However at third postoperative day, VAS scores of each group had no statistically significant differences. Moreover at fifth postoperative day group A had statistically significant lower scores for nasal pain, dry mouth than the group B. Conclusion: Combination method of using NAS and SPF have some advantage on the patient comfort from first postoperative day to third postoperative day.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.25-31
• /
• 2000

It is required to use substantial amount of wet strength resin for producing multi-functional mulch papers since these paper products shold maintain its strength properties when they exposed to outdoor weather for several months. While producing mulch papers it is usual to observe significant amount of foam at white water silo. Thus it is imperative to use defoaming or antifoaming agents. In this study diverse defoaming and antifoaming agents have been tested for their effective-ness in eliminating foams that produced. It was shown that combined use of a silicone type defoamer and a fatty acid type anti-foaming agent was msot effective in eliminating foams. These chemicals were used in trial production of mulch papers and their influence on paper-making wet end system was examined including one pass retention cationic demand con-ductivity pH etc. It was found that the defoaming agents were very effective for removing foams in trial production. Tensile strengths of the mulch papers produced were significantly greater than commericial mulch papers produced in Japan.

• 중환자간호학회지
• /
• 제11권1호
• /
• pp.67-78
• /
• 2018

Purpose : A meta-analysis was conducted to identify the effectiveness of strategies designed to prevent the incidence and prevalence of pressure ulcers in intensive care units (ICUs). Method : The search strategy was designed to retrieve studies both published and unpublished between 2007 and 2017 including studies in English across PubMed and CINAHL, as well as in Korean across RISS, DBPia, NDSL, KISS, and NAL. All adult ICU participants were 18 years or over. Inclusion criteria were randomized controlled trials, quasi-experimental and comparative studies. Two independent reviewers conducted quality assessments of the included studies by Scottish Intercollegiate Guidelines Network. A Review Manager 5 was used to analyze effect sizes and to identify possible sources of heterogeneity among the studies. Results : The odds ratio (OR) effect sizes were all statistically significant. The OR of total effect size was 0.30(95% CI: 0.19, 0.47), care bundle was 0.37(95% CI: 0.24, 0.57), position change was 0.45(95% CI: 0.10, 2.08), and a silicone border foam dressing was 0.14 (95% CI: 0.07, 0.29). Conclusion : The preventive interventions for patients in the ICUs have positive impacts on reducing the incidence of pressure ulcers.

• 복식문화연구
• /
• 제31권5호
• /
• pp.692-704
• /
• 2023

This study analyzed 214 sports knee braces found on Chinese websites between October 2022 and November 2022 to assess product type (impact protection material, fastening method, and protection method), material composition, size, weight, and main characteristics. The product type was further categorized according to (1) use of hard guard and soft guard protection method; (2) cover type, strap type, and slip-on type fastening method; and (3) pressure type and support type protection method. It also noted the physical shock protection materials used, including foam (EVA or polyurethane) attached to joints as a buffer material and plastic (TPU or PP) that protects the user's knee from external impacts. The study found that the materials that primarily comprise sports knee braces are a combination of nylon, polyester, and neoprene. Additionally, it found that most sports knee braces available on the market are available in three sizes based on knee circumference: M (35-38cm), L (38-41cm), and XL (41-44cm), while some products are available in one size only. Furthermore, the majority of the 214 products studied weighed 200g, followed by 1,000g. Finally, in terms of product characteristics, many sports knee braces utilize ring-shaped silicone pads to distribute the load pressure on the knees or incorporate sturdy adhesive velcro to improve knee stability.

• 폴리머
• /
• 제39권2호
• /
• pp.210-218
• /
• 2015

본 연구에서는 아민계 젤화 촉매 dimethylcyclohexyl amine(DMCHA)과 칼륨계 젤화 촉매 potassium octoate(PO)가 경질 폴리우레탄 발포체의 반응거동에 미치는 영향에 대해 연구하였다. Polymeric 4,4'-diphenyl methane diisocyanate, 폴리에스터 폴리올, 실리콘 유화제, 발포제 그리고 젤화 촉매를 사용하여 경질 폴리우레탄 발포체를 제조하였다. DMCHA 촉매의 함량이 0에서 2.0 g으로 증가함에 따라 반응 시간이 약 330초에서 약 35초로 감소하였고, 발열 반응으로 최대 반응온도는 약 217에서 약 $234^{\circ}C$로 증가하였다. PO 촉매의 함량이 0에서 2.5 g으로 증가할수록 반응 시간은 약 79초에서 약 38초로 감소함을 보였고, 특히 젤 타임, 택 프리 타임의 단축에 기여하였으며, 최대 반응온도가 약 182에서 약 $271^{\circ}C$로 증가하였다. 단열 온도 상승법을 이용하여 전환율을 구하였고, 반응식의 상수들을 계산하였다. 반응속도상수 $k_0$는 DMCHA 촉매의 양이 증가할수록 큰 값을 갖는 것을 확인하였고, PO 촉매의 경우 촉매량 증가와 큰 관계없이 유사한 값을 나타냈다.