• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on roan temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge. the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains $(CH_3)$ and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on loon temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge, the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains (CH$_3$) and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• 한국의학물리학회지:의학물리
• /
• 제20권3호
• /
• pp.125-131
• /
• 2009

본 연구는 소화기영역에서의 재협착을 방지하기 위하여 인간의 혈관 평활근 세포의 증식과 이동을 억제하며 신생내막의 형성을 억제하는 특성을 갖는 파클리탁셀(paclitaxel)을 스텐트 표면에 PVAc, PLGA, Silicone rubber 등 다양한 생체고분자로 코팅하여 paclitaxel eluting stent (PES)을 제조하고 그 특성을 분석하였다. 제조된 PES는 코팅용액의 농도가 증가할수록 그리고 코팅고분자의 분자량이 증가할수록 약물함량은 증가 되었고, bare 스텐트보다 커버드(covered) 스텐트의 표면적이 넓기 때문에 약물함량이 약 3배 정도 많음을 알 수 있었다. $^1H-NMR$ 결과에서 스텐트 표면에 파클리탁셀의 코팅과 약물의 변형이 없었음을 알 수 있었고, Silicone rubber을 제외한 다른 생체고분자는 스텐트 표면에 약물이 고르게 코팅되었음을 SEM image로부터 알 수 있었다. 그리고 in vitro에서 PES의 항암활성은 생분해성 고분자이고 분자량이 작은 PLGA 502H가 가장 높게 나타났으며, 분자량이 높을수록 낮은 항암활성을 나타냈다. 이상의 결과로부터 코팅고분자의 종류, 분자량 그리고 코팅용액의 농도를 변화시켜 약물함량을 증가시키고 약물방출을 조절할 수 있는 PES를 성공적으로 제조하였다.

• 한국표면공학회지
• /
• 제53권6호
• /
• pp.300-305
• /
• 2020

Corrosion of reinforcement steel rebar is a serious problem in a wide range of concrete application for buildings and infrastructures. Hydrophobizing surface treatments, such as self-assembled monolayer coating, edible oil-impregnation and silicone oil-impregnation were applied to solidified concrete. The hydrophobizing of concrete significantly reduces an absorption and transportation of water toward a steel rebar in concrete, so that the corrosion resistance of the steel rebar. In particular, the silicone oil-impregnation not only forms the hydrophobic monolayer on the concrete but also fills the inter-connected pores of concrete, thus the corrosion of steel rebar is significantly inhibited compared to the self-assembled monolayer coating and edible oil-impregnation. Therefore, the silicone oil-impregnation can be a promising candidate for preventing corrosion of steel rebar in concrete for durable performance and safety.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.21-25
• /
• 2008

Surface treatments act as a barrier between the environment and the concrete, preventing or retarding the entry of harmful substances and cutting off the transportation path into concrete. The effectiveness of a surface protection preventing the permeation depends on how close and strongly connected are the resin molecules. This work intends to contribute to a better understanding of the performance of protected concrete in chemically aggressive environments, by presenting results of ion diffusion and resistance to aggressive solutions of several hydrophobic agents and coatings used to protect concrete. Three different types of surface protections were tested: silicone hydrophobic agent, acrylic and epoxy coatings. The obtained results indicate that the overall performance of epoxy resin was better than the other selected types of protections.

• 멤브레인
• /
• 제7권1호
• /
• pp.22-30
• /
• 1997

Porous asymmetric membranes were prepared from polyetherimide polymer by the phase-inversion technique under different conditions. The performance of the membranes was tested for the removal of acetone vapour from nitrogen. A membrane which showed a high acetone permeability and a high selectivity was chosen and tested further for the separation of different organic vapours from nitrogen. The molecular structure of organic vapours and the selectivity were correlated. A strong correlation was also found between the chromatographic retention time of the organic vapour and the selectivity. These experimental results led to the conclusion that the sorption is the factor governing the separation of volatile organic compounds from nitrogen. A membrane was also prepared by coating the surface of a porous polyetherimide membrane with silicone rubber. The performance of membranes with and without silicone rubber coating was compared.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.195-201
• /
• 2018

Three kinds of rubber compounds were prepared, and their underwater acoustical properties were investigated for anechoic coating. Dynamic mechanical properties of the rubber compounds were measured using a dynamic mechanical analyzer and extended to 100 kHz using time-temperature superposition. The sound speed, reflection coefficient, and attenuation constant were calculated. Silicone rubber showed the lowest reflection coefficient, and nitrile rubber showed the highest attenuation constant. The acoustic properties of nitrile rubber compounds with various compositions were investigated. The sound speed, reflection coefficient, and transmission coefficient of the nitrile rubber in the frequency range of 200-1000 kHz were measured in a water-filled tank.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.149-153
• /
• 2002

1968년 Phillips Petroleum사에 의해 개발된 LLDPE(linear low density polyethylene)는 저가이며 인장강도, 연신율 등의 뛰어난 기계적 물성으로 인해 각종 필름, 코팅제, Cable용으로 사용되고 있다. 일반적으로 LLDPE의 용융점은 12$0^{\circ}C$정도이나 이보다 매우 낮은 온도에서 연화되어 기계적 물성이 급격히 저하되므로 Coating재료, 단열Cable, 내열성 Film분야 등의 용도에는 사용상 제약을 받는다. 반면 Silicone은 난연성, 내열성, 내화학특성 및 전기절연성이 우수하여 공업재료로 널리 사용되지만 기계적물성, 저온취성, 고가인 단점이 있어 용도에 따라 일반재료로는 사용하기 어렵다.(중략)

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.239-245
• /
• 2010

Breathable waterproof PET fabrics were prepared by the UV coating of UV-curable polyurethaneacrylate(PUA) formulation mixed with polyethyleneglycol(PEG) as a water soluble pore former. The dispersed PEG in the UV-cured coating was extracted by warm water, which can generate individual circular pores uniformly distributed all over the coating instead of pore channels. Accordingly the moisture permeability of the microporously coated fabrics increased substantially with increasing PEG addition without significant reduction of hydrostatic pressure. Also the silicone diacrylate addition in the formulation was beneficial in increasing the hydrostatic pressure. The UV-based microporous coating can be an alternative to conventional thermal curing of solventborne polyurethane coating owing to the enhanced environment friendliness and energy saving.

• 공업화학
• /
• 제25권4호
• /
• pp.352-356
• /
• 2014

${\alpha},{\omega}$-Aminopropylpolydimethylsiloxane을 bisphenol-A diglycidyl ether (DGEBA)계 이관능성 에폭시 수지와 반응시켜 polydimethylsiloxane (PDMS)의 양 말단에 에폭시가 도입된 실리콘 변성 에폭시 수지(EMPDMS)를 제조한 다음 alkylesteraminopropyl alkoxy silane (XD 5607)을 반응시켜 PDMS가 도입된 에폭시 hybrid 화합물(EMPDMSH)을 제조하고 이를 FT-IR, $^1H$-NMR 및 $^{29}Si$-NMR로 구조를 확인하였다. EMPDMSH base 수지에 용매를 혼합하여 코팅 액을 제조하였으며, 이를 에폭시/유리 섬유 복합재료로 얻어진 필름에 도포하고 경화시킨 후 base수지 중에 함유된 PDMS의 함량에 따른 물성을 측정하였다. 코팅 면의 접촉각을 측정한 결과 기존의 에폭시 수지로 코팅하여 얻은 코팅 면에 비해 접촉각이 $41^{\circ}$에서 $71^{\circ}$로 약 $30^{\circ}$정도 증가되고 있어 코팅 면에 PDMS가 나타나 있음을 확인할 수 있었다. 또한 접착력 및 표면 평활도 개선효과 측정 결과 에폭시 자체 코팅 액이나 일반적으로 많이 사용되고 있는 아크릴계 코팅 액 보다 5B 등급의 뛰어난 접착력을 나타내었고 평활도 개선 효과도 우수함을 나타내었다.