• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.111-117
• /
• 1995

The alkali-aggregate reaction is a reaction between the alkali metals in the pore water of a concrete and an unstable mineral of the aggregate. There are three types of alkali-aggregate reation which causes deterioration of concrete, such as alkali-silicate reation, alkali-carbonate reaction and alkali-silica reation. Deterioration due to alkali-silica reation is more comon than that due to either the alkali-silicate or alkali-carbonate reaction. The alkali-silica reation is a reaction between the hydroxyl ions in the pore water of a concrete and silica which exists in signigicant quantities in the aggregate. In this PAPER, Alkali-aggregate reactions of mortar made with various abroad aggregate were investigated using XRD, microscope, chemical and physical tests. In additions, the effects of the texture of aggregate, Na, K, CI ion concentrations added to the mortar, on these reactions were studied.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.491-499
• /
• 1997

High flexible lightweight composites containing tobermorite as a main mineral is produced using various amorphous silicates, lime, cement and fibers. Here, Mechanical properties of the composites were studied by observing microstructures of hydrates and fibers. Amorphous silicates having better hydraulicity retarded the crystallization of tobermorite due to better formation of C-S-H gel in water bath curing, but, difficult conversion from C-S-H gel to tobermorite in hydrothermal reaction. In the low molar ratio of CaO/SiO2 (0.67), faster crystalization was observed dued to more impurities such as Al2O3 alkali, resulting in improving mechanical properties due to small crystal size and many contact points. It was identified that a lot of calcium silicate hydates formed at surface of pulps increase bonding strength and the crack-resistance of matrix in the composites, but decrease hardness and compressive strength. The choice of amorpous silicates having better hydraulicity, low CaO/SiO2 adding each fibers bellow about 5% in the raw mixs and lower molding pressure should be needed at improve mechanical properties of composites.

• 자원환경지질
• /
• 제31권5호
• /
• pp.365-374
• /
• 1998

Economic U- and Th-bearing pegmatite deposits occur in the Kyemyeongsan Formation, and are spatially closely associated with the Carboniferous alkali granite. The pegmatite is lithochemically alkaline and peralumious, and consists mainly of potassic feldspar and quartz with allanite and U- and Th-bearing minerals. Paragenetic stages of mineralization in the pegmatite are divided as follows: early silicate mineralization, main rare metal mineralization, and late silicate mineralization. Thorite, euxenite, fergusonite and uranpyrochlore are the predominant U- and Th-bearing minerals. Both the enrichments of Nb, Y, Th, U, and Ta and the depletions of Hf, Ba, and Rb in the pegmatite were resulted from magmatic differentiation. The increases of Na and Ca in uranpyrochlore, of Th and U in fergusonite, of Si, Th, U and Pb in thorite, and of Nb and Y in euxenite were possibly resulted from both later internal fractionation and hydrothermal alteration. The variation of chemical composition in a mineral species reflects the different pysico-chemical conditions during the crystallization.

• 한국세라믹학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 1974

The mixture of quartz powder and slaked lime with plenty water was oscillated in an autoclave and treated hydrothermally under the pressure of 10 kg/$\textrm{cm}^2$ for 8 hours. The main mineral synthesized was confirmed 11$\AA$ tobermorite by the method of X-ray diffraction and selected area electron diffraction. Tobermorite was heat-treated at 40$0^{\circ}C$, 80$0^{\circ}C$ and 100$0^{\circ}C$ for investigation of transformation of morphology and structure. Electron micrographs showed the thin platy structure of synthetic tobermorite with a little of crumpled foil or fibrous semi-crystalline calcium silicate hydrates. No difference in structure was appeared under the temperature of 80$0^{\circ}C$ but tobermorite converted gradually into wollastonite at 800$^{\circ}$~85$0^{\circ}C$. On heating, moulded material from tobermorite hardly shrinks under 80$0^{\circ}C$.

• 약학회지
• /
• 제13권2_3호
• /
• pp.88-92
• /
• 1969

As a part of series of "Studies on Inorganic Chinese Drugs in Korea" four arsenic mineral Chinese drugs were analyzed by emission spectrographic method, and also were studied crystallographically by X-ray diffraction method. The following results were revealed: 1) Tang-shin-suk was not a Native arsenic but a Arsenolite which containing 94% of $As_{2}O_{3}$, 2) Toh-shin-suk was Crade Aluminum silicate 3) Woong-whang was a Realgar $As_{2}S_{2}$, 4) Yeh-suk was a Ca-Al-Silicate which was mixed with .alpha.-quartz contaminated by Iron compound and trace amount of Arsenic. It was not verified that the presence of Arsenopyrite FeAsS which has been believed as a main component of Yeh-suk by a Japanese author Wakimizu, nor the presence of Arsenolite which was reported by Masutomi.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권4호
• /
• pp.579-582
• /
• 1989

Previous experiments have shown that aqueous sodium silicate ingested in drinking water may modify the gastrointestinal uptake and(or) tissue retention of certain trace elements, including heavy metals. The present experiment tested, with a mineral balance trial using sheep, the hypothesis that dietary silicic acid could modify uptake, retention and(or) biological effects of dietary Cd. Twenty-four wethers were fed a fibrous diet of ground alfalfa hay and cottonseed hulls to which either 0 or 150 ppm Cd was added as $CdCl_2$ and 0, .5 or 1% silicic acid (as dry matter of the diet). Body weight, feed intake, excretion of urine (volume) and feces (weight), digestibility of dry and organic matter, retention of nitrogen, and packed cell volumes of blood were not affected by either Cd or silicic acid (P<.10). Cadmium decreased (P<.05) Ca retention and increased (P<.01) Mg retention. Silicic acid decreased (P<.05) K retention. Silicic acid failed (P<.01) to modify the retention of added dietary Cd. Body retention of K, Mn and Ni in response to silicic acid varied with Cd levels. If Cd is interfering with mineral retention, silicic acid may be effective in preventing this interference.

• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.23-31
• /
• 2020

Recently, meteorological disasters have been increasing by climate change, excessive rainfall, and landslide. The purpose is to develop new fabric concrete that can prevent and recover from damages because some of areas are vulnerable to meteorological disaster. Specifically, this technology can minimize time and space constraint when repairing the concrete structure and installing a formwork. The structure of fabric concrete is a mixture of fabric concrete and a high-speed hardened cement, Silica sand, wollastonite mineral fiber, fabric material and waterproof PVC fabric. In this study, the ratio of mechanical properties and durability of the fabric concrete mixture was evaluated by deriving the binder: silica sand mix ratio of the fabric concrete mixture and substituting part of the cement amount with wollastonite mineral fiber. Best binder in performance evaluation: Silica sand mix ratio is 6: 4 and the target mechanical performance and durability are the best when over 15% wollastonite binder is replaced by silicate mineral fiber.

• 한국광물학회지
• /
• 제30권2호
• /
• pp.71-81
• /
• 2017

회백색 응회암으로 구성된 경주 골굴암 마애불의 효과적인 보존처리를 위하여 구성암석의 특징과 보존처리제 적용에 따른 효과를 살펴보았다. 구성암석은 팽윤성 광물인 몬모릴로나이트를 3-5% 함유하고 있으며, 물과 반응 후 팽윤성 광물의 층간간격이 증가함을 보였다(1.54-2.69%). 에틸실리케이트 암석강화제를 적용한 후 시편의 표면 경도, 흡수율, 공극률 등의 물성은 향상되었으나 팽윤성 광물의 층간간격이 감소하였으며(4.23-12.12%), 팽윤성 광물의 함량이 많을수록 그 정도는 컸다. 팽윤저지제를 선 처리한 후 강화제를 적용하였을 때 물성은 강화제만을 처리하였을 때와 거의 유사한 결과를 보였다. 팽윤저지제만의 처리로는 팽윤성 광물의 층간간격이 거의 변화되지 않았으며, 팽윤저지제 처리 후 강화제를 처리하였을 때는 XRD 패턴에서 팽윤성 광물의 세기는 줄어들었으나 층간간격의 변화는 강화제만을 처리하였을 때와 유사하여 팽윤저지제의 효과는 거의 없었다(4.10-11.85%). 따라서 팽윤성 광물을 함유하고 있는 골굴암 마애불 구성암석을 강화시키기 위한 보존처리제로서 에틸실리케이트 계열의 암석강화제는 적절치 않으며 이를 보완하기 위해 사용한 팽윤저지제도 효과적이지 못하다. 우수의 접촉으로 구성광물이 팽윤되어 풍화가 급속히 진행되기 때문에 현재로서는 하부와 측면 등 풍화가 심한 부분에 우수접촉을 저지시키는 조치가 필요하다.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.37-42
• /
• 2017

이산화탄소 저감을 위한 유효한 방법 중의 하나로 칼슘규산염 광물의 간접탄산염화 공정이 보고되고 있다. 이 공정은 염산, 질산 등의 산에 의하여 칼슘규산염으로부터 칼슘성분을 침출하는 단계와 이산화탄소에 의한 침출용액의 탄산염화 단계의 두 과정으로 구성된다. 침출용매로 초산수용액을 사용하는 경우에는 침출용액을 이산화탄소로 탄산염화 하는 과정에서 초산이 재생성 되어 침출단계로 순환되어 침출용매로 재사용될 수 있다. 제철 및 제강슬래그와 같은 산업부산물은 칼슘규산염을 많이 함유하고 있어 간접탄산염화공정의 원료로 사용될 수 있다. 본 연구에서는 초산수용액에 의한 국내 전기로제강슬래그의 침출효율을 조사하기 위하여, 초산수용액 농도, 침출온도 및 침출시간 등의 침출조건 변화에 따른 침출실험을 수행하였다.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.134-141
• /
• 2013

Pond ash produced from Seochun Power Station was quantitatively characterized to manufacture geopolymers with a range of Si/Al compositional ratios. Mix consistency was kept nearly constant for comparing the compressive strengths of geopolymers. The amorphous composition of coal ash was determined using XRF and quantitative X-ray diffraction. Different mix compositions were used in order to achieve Si/Al ratios of 2.0, 2.5 and 3.0 in the geopolymer binder. Geopolymers synthesized from coal ash with a Si/Al ratio of 3.0 exhibited the highest compressive strength in this study. It was found that geopolymers activated with aluminate produced different microstructure from that of geopolymers activated with silicate. High silica in alkali activators produced the fine-grained microstructure of geopolymer gel. It was also found that high compressive strength was related to low porosity and a dense, connected microstructure. The outcome of the reported experiment indicates that quantitative formulation method made it possible to choose suitable activators for achieving targeted compositions of geopolymers and to avoid efflorescence.