• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.306-311
• /
• 1998

Effects of soluble silicon and surfactants on the development of powdery mildew of cucumber were tested for environmentally safe powdery mildew control. Tested soluble silicon was potassium silicate$(K_2SiO_3)$ and tested commercial surfactants were Jeonchakje, Silhouette, Kaba, and Tween 20. Tested concentrations were 2, 4, 8, 16mM for the soluble silicon, 0.5 and 1.0% for Tween 20, 0.05 and 0.1% for both Jeonchakje and Kaba, and 0.03 and 0.07% for Silhouette. Water dilutions of tested materials were sprayed on cucumber (Cucumis sativus) leaves once a week for 4 weeks. From 3 days after the second spray, the diseased area and the numbers of fungal colony were measured from the treated leaves for 6 times at 3-4 days interval. Powdery mildew was less severe on treated cucumber compared to distilled water-treated cucumber (check). In all treatments, diseased area index was proportional to the number of the fungal colony. At the end of investigation, there was severe powdery mildew on check cucumbers. Average 30% of a leaf was colonized by powdery mildew fungus and the average number of the fungal colony per leaf reached to more than 70. On the other hand, none of the treated cucumber suffered severe powdery mildew. The treatments including 8 and 16mM of soluble silicon, doubled concentration of Kaba, and 0.5 and 1.0% of Tween 20 showed more than 80% of control effect compared to water-treated cucumber. In addition, no phytotoxicity was found. Potassium silicate and Tween 20 showed the possibility to replace chemical pesticides for the control of powdery mildew.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.457-464
• /
• 2022

In this study, XRF, Loss on ignition, SEM, and PSA analysis were performed on four types of fly ash in Vietnam and compared with fly ash in Korea. As a result, PC boiler fly ash in Vietnam has a similar chemical composition to that of PC boiler fly ash in Korea, where the content of SiO₂, Al₂O₃, and Fe₂O₃ accounts for about 70%. In addition, the result showed that blast furnace slags in Vietnam and Korea have similar quality criteria and performance. A binder material mixing test using four types of fly ash supplied from Vietnam was conducted, and the compressive strength ranged from 7.60 to 13.25 MPa after 28 days of curing. Vinh Tan fly ash showing the highest compressive strength was selected as the soil injection material for the chemical grouting method. For the formulation of the chemical grouting method, sodium silicate No.3 and silica-sol were used as liquid-A. As a result of measuring the gel time and the compressive strength of the homogel, they showed good performance satisfying the quality criteria applied in Korean construction fields. Therefore, Vinh Tan fly ash can be used as a soil injection material for the chemical grouting method.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.2
• /
• pp.73-85
• /
• 1995

춘천 지역 구봉산층군 내에서 산출되는 백색 및 흑회색 투감섬석에 대하여 전자현미분석과 리트벨트법에 의하여 결정화학적 특징이 연구되었다. 화학 조성상 백색 투감섬석 (WHT)은 흑회색형 (BLT)에 비하여 Al과 Na의 양은 많고, Mg와 Ca의 양은 적은 차이를 보여준다. 단위포의 크기에 있어 b축의 길이는 WHT가 BLT보다 약 0.013$\AA$ 크다. 이는 후자의 M(4) 자리에 보다 많은 Na와 Mg가 치환된 결과로서 계사된 $\AA$로 잘 일치하고 있다. 자리 점유율에 있어 BLT의 경우 모든 Al이 T(2)에 채워지며, WHT에서는 T(1), T(2)에 각각 0.138, 0.181씩 Si를 치환하고 있다. M(1), M(2), 및 M(3)는 모두 Mg에 의해 채워지고 있으며, Ca가 채워지는 M(4)에는 BLT에서는 소량의 Mg가 들어 있다. (001) 방향으로 투각섬석의 구조를 작도해 보면, WHT에서는 사면체의 바닥면이 T(1) 안쪽으로 다소 기울어져 있으나, BLT에서는 T(1)과 T(2)가 서로 마주보며 기울어져 있는 특이한 양상을 보여준다. 이러한 구조상의 차이점은 앞으로 보다 많은 투각섬석에 대한 구조적인 연구를 수행할 필요가 있음을 보여준다.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.589-594
• /
• 2006

The recycling of industrial wastes in the concrete manufacturing is of increasing interest worldwide, due to the high environmental impact of the cement and concrete industries and to the rising demand of infrastructures, both in industrialized and developing countries. The production of municipal wastes in the South Korea is estimated at about 49,902 ton per day and only 14.5% of these are incinerated and principally disposed of in landfill. These quantities will increase considerably with the growth of municipal waste production, the progressive closing of landfill, so the disposal of municipal solid waste incinerator(MSWI) ashes has become a continuous and significant issue facing society, both environmentally and economically. MSWI ash is the residue from waste combustion processes at temperature between $850^{\circ}C\;and\;1,000^{\circ}C$. And the main components of MSWI ash are $SiO_2,\;CaO\;and\;Al_2O_3$. The aim of this study is to find a way to useful application of MSWI ash(after treatment) as a structural material and to investigates the hydraulic activity, compressive strength development composition variation of such alkali-activated MSWI ashes concrete. And it was found that early cement hydration, followed by the breakdown and dissolving of the MSWI-ashes, enhanced the formation of calcium silicate hydrates(C-S-H). The XRD and SEM-EDS results indicate that, both the hydration degree and strength development are closely connected with a curing condition and a alkali-activator. Compressive strengths with values in the 40.5 MPa were obtained after curing the activated MSWI ashes with NaOH+water glass at $90^{\circ}C$.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.4
• /
• pp.289-299
• /
• 2014

Alkali-activated slag concretes are being extensively researched because of its potential sustainability-related benefits. For such concretes to be implemented in large scale concrete applications such as infrastructural and building elements, it is essential to understand its early and long-term performance characteristics vis-a'-vis conventional ordinary portland cement (OPC) based concretes. This paper presents a comprehensive study of the property and performance features including early-age isothermal calorimetric response, compressive strength development with time, microstructural features such as the pore volume and representative pore size, and accelerated chloride transport resistance of OPC and alkali-activated binder systems. Slag mixtures activated using sodium silicate solution ($SiO_2$-to-$Na_2O$ ratio or $M_s$ of 1-2) to provide a total alkalinity of 0.05 ($Na_2O$-to-binder ratio) are compared with OPC mixtures with and without partial cement replacement with Class F fly ash (20 % by mass) or silica fume (6 % by mass). Major similarities are noted between these binder systems for: (1) calorimetric response with respect to the presence of features even though the locations and peaks vary based on $M_s$, (2) compressive strength and its development, (3) total porosity and pore size, and (4) rapid chloride permeability and non-steady state migration coefficients. Moreover, electrical impedance based circuit models are used to bring out the microstructural features (resistance of the connected pores, and capacitances of the solid phase and pore-solid interface) that are similar in conventional OPC and alkali-activated slag concretes. This study thus demonstrates that performance-equivalent alkali-activated slag systems that are more sustainable from energy and environmental standpoints can be proportioned.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.4
• /
• pp.233-239
• /
• 2015

Monitoring of soil fertility and crop productivity in long-term application of fertilizers is necessary to use fertilizers efficiently. This study was conducted to investigate effects of continuous application of lime for rice cultivation from 1969 to 2014. The treatments were no lime treatments (N, NPK, NPKC, and NPKS) and lime treatments (N+L, NPK+L, NPKC+L, and NPKS+L). The application of lime in addition to N, NPK, and NPKC tended to increase pH, exchangeable Ca, and available $SiO_2$. The input of mean annual $1,170Mg\;ha^{-1}yr^{-1}$ of lime increased pH $0.0042yr^{-1}$, $0.0062yr^{-1}$, $0.0127yr^{-1}$, and $0.0041yr^{-1}$ in lime treatments (N+L, NPK+L, NPKS+L, and NPKC+L) compared with no treatments (N, NPK, NPKS, and NPKC), respectively. The mean annual Ca field balance varied from 169 to $561kg\;ha^{-1}yr^{-1}$in no treatments, from 871 to $1,263kg\;ha^{-1}yr^{-1}$ in lime treatments, indicating that Ca was accumulated in the soils. The mean annual Ca field balance in silicate fertilizer treatments (NPKS, NPKS+L) were higher than that of other treatments because silicate fertilizer included Ca component. Grain yield of rice had no significant differences between no lime treatments and lime treatments. Thus the application of lime led to changes in soil chemical properties but had no impact on the production of rice.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.497-508
• /
• 2017

This study was carried out to document and diagnose the conditions of the seated stone statue of Buddhist Master Seungga in Seunggasa temple immediately after its conservation treatment, which was found to be long covered in surface of white materials. The stone Halo was researched along with the Statue, and basic data was secured through precisely examination and nondestructive diagnosis. The result from the surface deterioration evaluation shows that both the Statue and Halo had a little bit of physical deterioration, although their level of chemical deterioration was proportionally higher due to discoloration. The physical property diagnosis using ultrasonic measurements on the Statue and Halo showed that the average ultrasonic velocity was found to be 3,570 m/s and 3,373 m/s, respectively, which corresponds to grade III, an indication of a favorable physical property. The surface covered materials were detected to be Ca, Ti, Pb, Fe, Al and Si, emanating from Hobun (Oster shell powder; $CaCO_3$) or lime ($CaO{\cdot}Ca(OH)_2$) and silicate minerals. Furthermore, Ti and Pb seems to be the component of the white coloring pigments, titanium white ($TiO_2$) and white lead ($2PbCO_2{\cdot}Pb(OH)_2$). Therefore, the seated stone statue of Buddhist Master Seungga is presumed to be painted with Hobun or lime and thereafter painted over with titanium white and white lead.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.222-227
• /
• 2017

Flake-type micro hollow silica was synthesized by precipitation method using an $Mg(OH)_2$ inorganic template and sodium silicate and ammonium sulfate as the silica precursors. We investigated the effects of the silica precursor concentration on the shape, shell thickness, and surface of the hollow silica. When the concentration of the silica precursor was 0.5 M, the hollow silica had a smooth and translucent thin shell, but the shell was broken. On the other hand, the shell thickness of the hollow silica changed in the range of 12 nm to 18 nm with the increase of the precursor concentration from 0.7 M to 1.1 M. Simultaneously, unintended spherical silica satellites were created on the shell surface. The number of satellites and the size rose according to the increased concentration of silica precursor. The reason for the formation of spherical silica satellites is that the $NH_4OH$ nucleus generated in the synthesis of hollow silica acted as another silica reaction site.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.114-121
• /
• 2017

The purpose of this study is to understand a compressive strength and propose a dry shrinkage strain equation being able to predict dry shrinkage of alkali-activated materials(AAM) mortar samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS). The main parameters investigated were the GGBFS replace ratios(30, 50, 70 and 100%) and sodium silicate modules(Ms[$SiO_2/Na_2O$] 1.0, 1.5 and 2.0). The compressive strength of AAM increased with increases GGBFS replace ratios or Ms contents. The dry shrinkage strain of AAM decreased with increases Ms contents. But, the dry shrinkage strain of AAM increased as the GGBFS replace ratio increases. Therefore, the GGBFS replace ratio seems to have very significant and important consequences for the mix design of the AAM mortar. The results indicated the R-square of single regression analysis based on each mix properties was the highest value; 0.7539~0.9786(average 0.9359). And the presumption equation of dry shrinkage strain with all variables(GGBFS, Ms and material age) has higher accuracy and its R-square was 0.8020 at initial curing temperature 23 degrees Celsius and 0.8018 at initial curuing temperature 70 degrees Celsius.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.104-112
• /
• 2012

This study involves investigating the correlation between variation of internal structure and heating temperature of alkali-activated fire protection materials using fly ash. Dehydration and micro crack thermal expansion occur in cement hydrates of cementitious materials heated by fire. Internal structure difference due to both the dehydration of cement hydrates and pore solution causes and influences changes in the properties of materials. Also, this study is concerned with change in microstructure and dehydration of the alkali-activated fire protection materials at high temperatures. The testing methods of alkali-activated fire protection materials in high temperature properties are make use of TG-DSC and mercury intrusion porosimetry measurements. The study results show that the alkali-activated fire resistant finishing material composed of potassium hydroxide, sodium silicate and fly ash has the high temperature thermal stability. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction.