• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1543-1549
• /
• 1997

In this paper, rank-based nonparmetric detection of composite signals in additive noise is considered. Based on signs and ranks of observations, the locally optimum detector is deived for weak-signal detection under any specified noise probability density funhction. This detector has similarities to the locally optimum detector for comjposite signals in additive noise. The asymptotic performance of this nonparametric detector is shown to be as good as that of the locally optimum detector.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.245-250
• /
• 2002

A successful on-line monitoring system for conventional machining operations has the potential to reduce cost, guarantee consistency of product quality, improve productivity and provide a safer environment for the operator. In fee-shape machining, typical signs of tool problems such as vibration, noise, chip flow characteristics and visual signs are almost unnoticeable without the use of special equipment. These characteristics increase the importance of automatic monitoring in fine-shape machining; however, sensing and interpretation of signals are more complex. In addition, the shafts of the micro-tools break before the typical extensive cutting edge of the tool gets damaged. In this study, the existence of a relationship between the characteristics of the cutting force and tool usage was investigated, and tool breakage detection algorithm was developed and the fellowing results are obtained. In data analysis, didn't use a relative error compare which mainly used in established experiment and investigated tool breakage detection algorithm in time domain which can detect AE and cutting force signals more effective and accurate.

• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.187-193
• /
• 2023

Previous research has explored early expression of fire signs before the burning of insulation. To achieve this, typically, automatic inspections are used to detect gas emitted from odor capsules at electrical connection points; additionally, early fire signs can be expressed using visual inspection of changes in the appearance of temperature caps. However, early detection of electrical fire is often difficult because only specific inspections, which are not complex, are performed. Therefore, in this paper, we present complex inspection techniques, such as visual inspection, odor inspection, and automatic inspection, and propose a showing material of fire signs that can solve conventional problems. In addition, this study examines the conditions under which the candidate material for the showing material is designed, the composition of the candidate material selected based on the designed conditions, the manufacturing means used to produce the showing material considering the temperature for early expression of fire signs, and the performance of the produced showing material. Furthermore, we analyze various effects that can occur through the proposed display material.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.229-237
• /
• 2014

Background: Dentists are typically the first professionals who are approached to treat ailments within the oral cavity. Therefore they should be well-equipped in detecting suspicious lesions during routine clinical practice. This study determined the levels of knowledge on early signs and risk factors associated with oral cancer and identified which factors influenced dentist participation in prevention and early detection of oral cancer. Materials and Methods: A survey on dentists' knowledge and their practices in prevention and early detection of oral cancer was conducted using a 26-item self-administered questionnaire. Results and Conclusions: A response rate of 41.7% was achieved. The level of knowledge on early signs and risk habits associated with oral cancer was high and the majority reported to have conducted opportunistic screening and advised patients on risk habit cessation. Factors that influenced the dentist in practising prevention and early detection of oral cancer were continuous education on oral cancer, age, nature of practice and recent graduation. Notably, dentists were receptive to further training in the area of oral cancer detection and cessation of risk habits. Taken together, the study demonstrated that the dental clinic is a good avenue to conduct programs on opportunistic screening, and continuous education in these areas is necessary to adequately equip dentists in running these programs. Further, this study also highlighted knowledge deficits and practice shortcomings which will help in planning and developing programs that further encourage better participation of dentists in prevention and early detection of oral cancer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.91-98
• /
• 2011

Road signs are part of the traffic facilities intended to guide drivers to their destinations in a safe and comfortable manner. Due to the creation of new routes, changes to the old routes, and the deterioration of road signs, road signs do require efforts to do ongoing field investigations and put the results in a database. The purpose of this study was to propose methodologies to do field investigations and build a database for road signs efficiently. For that purpose, a mobile mapping system was designed for field investigations. The designed mobile mapping system was comprised of three cameras to produce image information about road signs, GPS/IMU/DMI to obtain information about the position and attitude of a vehicle, and a laser scanner to generate information about the locations of road signs and routes. Also proposed in the study was a procedure to automatically detect the areas of road signs in the road signs images and recognize their characters.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5195-5199
• /
• 2012

Objectives: Global cancer statistical data show that India has one of the highest incidence rates of oral cancer worldwide. Early detection is extremely important as it results in lower morbidity and death rates. The present study was undertaken to assess awareness of oral cancer and knowledge of its early signs and risk factors in the general public of the semi-urban Gorakhpur area of Uttar Pradesh (India). It was also intended to educate the same population for early detection by increasing their ability to recognize signs and risk factors. Method: A questionnaire-based household survey was conducted over a period of one month in different parts of Gorakhpur district, a region where tobacco use is apparently very high. A total of 2,093 persons participated in the survey. The collected data were analyzed using SPSS software to assess and associate oral cancer awareness with the prevalence, and abstract risk factors, as well as other confounding variables. Results: The general awareness, knowledge of signs and risk factors of oral cancer were found to be proportionate to the literacy level with the highest rate of awareness being among high school and graduates and lowest among illiterates. It was also observed that on most of these dimensions the younger age groups (<30 years) were significantly more knowledgeable. Conclusion: Overall, the awareness of oral cancer in the high-risk population of Gorakhpur was not satisfactory, pointing to a need for further dissemination of information on this issue and its associated risks. This is especially important for the youngsters, as this may possibly help them keep away from the deleterious habit of tobacco indulgence in any form. If necessary risk factor cessation counselling should be provided.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.3
• /
• pp.24-31
• /
• 2004

A successful on-line monitoring system for conventional machining operations has the potential to reduce cost, guarantee consistency of product quality, improve productivity and provide a safer environment for the operator. In fine-shape machining, typical signs of tool problems such as vibration, noise, chip flow characteristics and visual signs are almost unnoticeable without the use of special equipment. These characteristics increase the importance of automatic monitoring in fine-shape machining, however, sensing and interpretation of signals ar more complex. In addition, the shafts of the mini-tools break before the typical extensive cutting edge of the tool gets damaged. In this study, the existence of a relationship between the characteristics of the cutting force and tool usage was investigated, and tool breakage detection algorithm by LabVIEW was developed and the following results are obtained. It was possible to use a relative error compare which mainly used in established experiment and investigated tool breakage detection algorithm in time domain which can detect AE and cutting force signals more effective and accurate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.228-241
• /
• 2021

This study verified the performance change of a LiDAR when it detects road signs, which are potential cooperation targets for an autonomous vehicle. In particular, road signs of different colors and materials were produced and tested in controlled rainfall on the real road environment. The NPC and intensity were selected as the performance indicators, and a T-Test was used for comparison. The study results show that the performance of LiDAR for the detection of road signs was reduced with the increase of rainfall. The degradation of performance in retroreflective sheets was lesser than painted road signs, but at the amount of 40 mm/h or more, the detection performance of retroreflective sheets deteriorates to an extent that data cannot be collected. The performance level of black paint was lower than that of other colors on a clear day. In addition, the white sheet was most sensitively degraded with the increase in precipitation. These performance verification results are expected to be utilized in the manufacturing of road facilities that improve the visibility of sensors in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.19-25
• /
• 2013

Recently, more accurate database information of facilities is being required, with the increase in importance of urban road facility management. Therefore, this study proposed how to automatically detect particular traffic signs necessary for efficient construction of road facility DB. For this study, central locations of facilities were searched, after recognition and automatic detection of particular traffic signs through an image. Then, coordinate values of traffic signs calculated in the study were compared with real coordinate values, in order to evaluate the accuracy of traffic sign locations which were finally detected. Computer vision technology was used in recognizing and detecting traffic signs through OPEN CV-based coding, and photogrammetry was used in calculating accurate locations of detected traffic signs. For the experiment, circular road signal(No Parking) and triangular road signal(Crosswalk) were chosen out of various kinds of road signals. The research result showed that the circular road signal had a nearly 50cm error value, and the triangular road signal had a nearly 60cm error value, when comparing the calculated coordinates with the real coordinates. Though this result is not satisfactory, it is considered that there would be no problem to find locations of traffic signs.

• Journal of Periodontal and Implant Science
• /
• v.44 no.6
• /
• pp.293-299
• /
• 2014

Purpose: Systemic disease can manifest oral signs at an early phase, which may be crucial for the diagnosis and timing of treatment. This report describes two patients who presented with gingival enlargement as an early sign of acute leukemia. Methods: Two patients presented with oral symptoms including severe gingival enlargement. The progress of their symptoms was associated with underlying systemic disease. Results: The patients were transferred to the Department of Hematology and diagnosed with acute myelomonocytic leukemia. They received appropriate treatment and survived. Conclusions: Gingival enlargement can be caused by underlying systemic diseases. Accurate diagnosis and timely referral are important for preventing a fatal situation. It must be emphasized that some oral signs and symptoms may be closely correlated with systemic diseases.