• 한국초전도학회:학술대회논문집
• /
• 2007.07a
• /
• pp.61-61
• /
• 2007

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.12-21
• /
• 2000

In this paper, we propose a novel hearing aid algorithm for sensorinural hearing loss restoration with multi-channel(band) dynamic range compression and psychoacoustics. In this way, we can present a normal perception condition to the impaired listener. The proposed algorithm make loudness scaling function achieve proper loudness level, and analysis masking property for the signal will be perceived to impaired listener, and then, restore normal spectral contrast using SMR(signal-to-masking ratio) defined by distance between the level of each frequency and masking threshold.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.19-32
• /
• 2003

In the conventional photorefractive joint transform correlator(PRJTC), the intensity ration of input signal-to-pump beam should be large enough to saturate two-beam coupling transfer function to obtain a desired correlation result. As a result, the signal-to-noise ratio(SNR) of correlation result is decreased in a noisy input image. In this paper, we propose the improved method for increasing the SNR of the PRJTC by using the characteristics of BaTiO$_3$. We stop the energy transfer saturating by low intensity ratio of input beam and realize a short length of effective interaction in BaTiO$_3$ by making large incident angle of the signal beam. So the gain in high frequency area is decreased and the gain in low frequency area comes up to the saturation gain of the beam coupling transfer function. Therefore the SNR is improved in noisy input image and the PRJTC can be easily realized by low intensity ratio of input beam.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.75-82
• /
• 2018

In this paper, we consider a precoder design for downlink multiuser multiple-input multiple-output (MU-MIMO) in distributed antenna systems (DAS). In DAS, remote radio heads (RRHs) are placed at geographically different locations within a cell area. Three different precoder design schemes are proposed to maximize the separate or joint signal-to-leakage-plus-noise ratio (SLNR) metrics by considering RRH sum power or per-RRH power constraints. The analytical closed-form form solution for each optimization problem is presented. Through computer simulation, we show that the joint SLNR based precoding schemes have better signal-to-interference-plus-noise ratio (SINR) and bit error rate (BER) performances than the separate SLNR based schemes. Also, it is shown that the precoding scheme with RRH sum power constraint has better performance than the precoding scheme with per-RRH power constraint.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.75-82
• /
• 1996

Laser induced incandescence, LII, recently developed technique for measuring soot concentration in flames, can overcome most of limitations of conventional laser extinction measurement. In this study, experiments were performed to investigate the effect of laser intensity, detection wavelength, and also laser beam quality on both LII signal at a particular position and peak-to-centerline LII signal ratio. The results of LII signal with increasing laser intensity shows its near-independence of laser intensity once threshold level of laser intensity has been reached. However, this near-independence depends on laser beam quality and the incident optical setup. The peak-to-centerline LII signal ratio slowly but continuously increases with laser power. This fact is due to the dependence of LII signal on particle mean diameter. LII signal is attenuated during it passes through the flame containing soot particles. The attenuation rate is inversely proportional to detection wavelength. In this study, LII signal at 680 nm band is 10% greater than the signal at 400 nm band.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.721-732
• /
• 2009

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK signal or QPSK signal as enhanced layer to existing DQPSK signal. The enhanced layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of existing T-DMB service area. But this causes the enhanced layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has powerful error correction capability is applied to the enhanced layer signal of the AT-DMB system for compensating channel distortion. We developed the prototype AT-DMB transmitter and receiver systems for performance evaluation. LAB test for analysing the effect of constellation ratio between existing base layer signal and enhancement layer signal, was conducted and the measurement results are shown with analysis comments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.1-5
• /
• 2001

We propose an optical performance monitoring method for WDM optical transmission systems. By assigning a pair of AWG ports to each optical signal channel. the optical power, optical signal-to-noise ratio (OSNIO, and wavelength of all the signal channels are observed simultaneously. The output power ratio of the AWG port pair depended on the wavelength variation of the channel with sensitivity of 1dB/0.026nm. The OSNH results were deviated no more than 0.7dB from the results measured by optical signal analyzer (OSA).

• ETRI Journal
• /
• v.30 no.2
• /
• pp.255-260
• /
• 2008

We compare the performance of a wavelength remodulated wavelength-division-multiplexed passive optical network implemented using Manchester-coded or inverse-return-to-zero (IRZ)-coded signal downstream and non-return-to-zero remodulated signal upstream. We investigate the effects of varying differences between downstream and upstream bit rates on the two coding schemes. When the bit rate ratio of upstream to downstream is less than or equal to 50%, the performance of Manchester coding is better than that of IRZ coding. However, when the bit rate ratio of upstream to downstream is higher than 50%, Manchester code requires appropriate time delay between upstream and downstream signals, whereas IRZ code needs reduced extinction ratio in the downstream signal.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1615-1618
• /
• 1987

This paper proposes new algorithm for classifying speech signal frame into voiced, unvoiced, silence frame, using the parameters extracted from time domain behavior of speech signal The prameters used in this paper are absolute magnitude, the sum of peaks lager than reference level (T-peak), the ratio of T-peak to absolute magnitude and the magnitude of signal outputs of DPCM. Using this parameters, speech signal is more easily classified into voiced/ unvoiced/silence frame.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.169-173
• /
• 1999

We have experimentally investigated the eye margin characteristics of intensity modulated 10Gb/s NRZ signals in optically amplified systems depending on optical signal-to-noise ratio and chromatic dispersion. For the practical system application, the minimum optical signal-to-noise ratio was 25 dB. We utilized the negative chirped transmitter and a dispersion compensation fiber to compensate the chromatic dispersion in single mode fiber. We found the optimum eye opening and receiver sensitivity in case of the residual dispersion of 0~+935 ps/nm.