• 대한후두음성언어의학회지
• /
• 제19권2호
• /
• pp.101-106
• /
• 2008

The speech signal has been put into a form suitable for storage and analysis by computer, several different operation can be performed. Filtering, sampling and quantization are the basic operation in digiting a speech signal. The waveform can be displayed, measured and even edited, and spectra can be computed using methods such as the Fast Fourier Transform (FFT), Linear predictive Coding (LPC), Cepstrum and filtering. The digitized signal also can be used to generate spectrograms. The spectrograph provide major advantages to the study of speech. So, author introduces the basic techniques for the acoustic recording, digital signal processing and the principles of spectrum and spectrogram.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.755-764
• /
• 2008

When the high speed train (KTX) departs from station in the high-speed line, sometimes on board signal disappears, which causes a hindrance of the operation punctuality, therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. In the process of research, when train left, we applied sand on the rail to improve adhesive power, whose sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which came from detecting device by changing operation condition in accordance with sand material

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.375-379
• /
• 2016

A current subtraction technique with parallel operation system is proposed to remove excessive current in touch screen application. The proposed current subtraction remove the current which go into the input node of charge amplifier. The value of subtraction current is same with current when touch screen is not touched. As a result, charge amplifier output is only proportional to variation of mutual capacitor, which make dynamic rage is increased. Also, Transmitter (Tx) driving signal and subtraction driving signal are out of phase each other. Thus, noise generated in Tx is cancelled. The proposed IC is implemented in a mixed-mode 0.18-um CMOS process. Overall system is designed for touch screen panel (TSP) with 16 driving lines and 8 sensing lines. 5-V supply voltages are used in the proposed circuits. For multiple Tx driving signal, Walsh codes are used and signal frequency is 300 khz. By using proposed technique, dynamic rage is improved 36 dB.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1168-1173
• /
• 2007

The Seoul Subway is one of the most heavily used Subway System in the world. It provides reliable transportation services, conveys nearly 4 million Passengers across 117 subway stations with a length of 134.9 Km. Over the years the safety for the Subway has been a major concern, trains going off the track, equipment failure, careless operation, Signal failure are increasing day by day. In a Recent Public opinion 40% said the causes to above facts are Vehicle breakdown because of Operators, Old rail defect, Quality of material. 20% of the opinion said the obstacles were because of Operation, crew carelessness, negligence in signal operation. In case of any accident the crew members cannot resolve the issue on site (Aid insufficiency), because of lack of knowledge and carelessness. The main obstacles for Subway are vehicle breakdown, Electric equipment failure, Signal Equipment failure, and Crew carelessness. This paper aims to provide major problems which are needed to be solved as quickly as possible for citizen's safety for a comfortable subway system making a comfortable ride and providing better service gradually.

• 한국ITS학회 논문지
• /
• 제22권3호
• /
• pp.20-37
• /
• 2023

본 연구는 지속 확대 설치되고 있는 교통신호기가 교통사고 예방에 어떤 효과가 있는지 분석하기 위한 것이다. 대전광역시 교통신호기 1,602개소 중에서 2013~2019년까지 7년간 TCS에 등록된 신호위반 등 교통사고 자료 7,045건을 수기 검색하였다. 교통사고 다발 상위 20개소 교차로를 특정하고, 교통사고 조사기록과 현장지도를 열람하여 위반차량의 주행 방향, 신호현시를 비교분석하고, 신호위반 교통사고 원인을 신호운영 설계(운영) 미흡과 운전자 과실(고의)을 구분해서 문제점 및 개선안을 제안하였다. 분석 결과 직좌동시신호와 중복현시 등에서 신호위반 교통사고 75%가 발생하였고, 황색신호에서 발생하는 교통사고 대책으로 황색신호시간 연장 또는 전적색(All Red)신호 운영시 교통사고가 줄어들었다. 비보호 좌회전은 정상신호로 개선이 필요하다. 또한, 경찰에서는 교통사고 현장지도 및 신호관련 자료에 대하여 수기 열람으로 교통사고 예방대책 수립시 많은 인력과 활용도가 떨어져 교통업무관리시스템(TCS)의 개선이 필요하다. 본 연구는 현장에서 수집한 방대한 데이터를 분석하여 개선방안을 제시한 것으로 신호운영에 기여할 것으로 판단된다.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2005년도 제4회 추계학술대회 및 정기총회
• /
• pp.34-39
• /
• 2005

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.439-445
• /
• 2005

The stud bolt is one of crucial parts for safe operation of reactor vessels in nuclear power plants, Crack initiation and propagation were reported in stud bolts that arc used for closure of reactor vessel and head, Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure which could induce radioactive leakage from nuclear reactor, In conventional ultrasonic testing for inspection of stud bolts, cracks are detected by using shadow effect It takes too much time to inspect stud bolts by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread, In this study, the signal processing technique for enhancing conventional ultrasonic technique was introduced for inspecting stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. Detectability for small crack was enhanced by using this signal processing in ultrasonic inspection of stud bolts in Nuclear Power Plants.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.202-207
• /
• 2002

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are generated and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used in MTF compensation for EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise power spectra ratio is the only factor in the determination of Wiener filter. In this paper, MTF compensation in IRPE at KGS is introduced and MTF compensated EOC 1R images are generated using Wiener filters with various signal-to-noise power spectra ratios. MTF compensated EOC 1R images are correlated with EOC 1R images for observing linearities between them. As a result, the effect of signal-to-noise power spectra ratio is shown on MTF compensated EOC 1R images.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
• /
• pp.125-129
• /
• 2006

By advent of NNC(Neural Network Chip), it is possible that process in parallel and discern the importance of signal with learning oneself by experience in external signal. So, the design of general purpose operation unit using VHDL(VHSIC Hardware Description Language) on the existing FPGA(Field Programmable Gate Array) can replaced EN(Expert Network) and learning algorithm. Also, neural network operation unit is possible various operation using learning of NN(Neural Network). This paper present general purpose operation unit using hierarchical structure of EN. EN of presented structure learn from logical gate which constitute a operation unit, it relocated several layer. The overall structure is hierarchical using a module, it has generality more than FPGA operation unit.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.69-74
• /
• 1998

In order to monitor the tool wear in milling operation, cutting force is measured as the tool wear increased. The digital signal processing methods are used to detect the tool wear . As AR parameter extract the feature of tool wear , it can be used as input parameter of pattern classifier. The FFT monitor the tool wear exactly , but it can not do real time signal processing. The band energy method can be used to real time monitoring of tool wear ,but int can degrade the exact monitoring.