• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.584-587
• /
• 1997

In this paper, we present a transmission constraints modeling of carrier relay signal over ATM network. Since teleprotection system, which is used for protecting power transmission lines using telecommunications, has strict transmission delay constraints, it is a important problem to transmit teleprotection signals in future utilities' ATM networks when utilites' communications are integrated. Therefore, we considered the transmission constraints of carrier relay signal over ATM network and the transmission model system.

• Molecules and Cells
• /
• 제25권3호
• /
• pp.397-406
• /
• 2008

Computational modeling of signal transduction is currently attracting much attention as it can promote the understanding of complex signal transduction mechanisms. Although several mathematical models have been used to examine signaling pathways, little attention has been given to crosstalk mechanisms. In this study, an attempt was made to develop a computational model for the pathways involving growth-factor-mediated mitogen-activated protein kinase (MAPK) and phosphatidylinositol 3'-kinase/protein kinase B (PI3K/Akt). In addition, the dynamics of the protein activities were analyzed based on a set of kinetic data. The simulation approach integrates the information on several levels and predicts systems behavior. The in-silico analysis conducted revealed that the Raf and Akt pathways act independently.

• Smart Structures and Systems
• /
• 제1권2호
• /
• pp.121-140
• /
• 2005

This paper presents a systematic investigation of the effect of sensor location on the data quality and subsequently, on the effectiveness of machine health monitoring. Based on an analysis of the signal propagation process from the defect location to the sensor, numerical simulations using finite element modeling were conducted on a bearing test bed to determine the signal strength at several representative sensor locations. The results showed that placing sensors closely to the machine component being monitored is critical to achieving high signal-to-noise ratio, thus improving the data quality. Using millimeter-sized piezoceramic plates, the obtained results were evaluated experimentally. A comparison with a set of commercial vibration sensors verified the developed structural dynamics-based sensor placement strategy. It further demonstrated that the proposed shock wave-based sensing technique provided an effective alternative to vibration measurement, while requiring less space for sensor installation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.22.1-22
• /
• 2001

In this paper we present Multiple-Channel Active Noise Control[ANC] system by employing Independent Component Analysis[ICA] and Adaptive Network Fuzzy Inference System[ANFIS]. ICA is widely used in signal processing and communication and it use prewhiting and appropriate choice of non-linearities, ICA can separate mixed signal. ANFIS controller is trained with the hybrid learning algorithm to optimize its parameters for adaptively canceling noise. This new method which minimizes a statistical dependency of mutual information(MI) in mixed low frequency noise signal and there is no need to secondary path modeling. The proposed implementations achieve more powerful and stable noise reduction than Filtered-X LMS algorithms which is needed for LTI assumption and precise secondary error

• 한국음향학회지
• /
• 제26권4호
• /
• pp.144-152
• /
• 2007

기존의 심음분류를 위한 연구들은 인공신경망을 이용하여 주로 이루어졌다. 그러나 심음신호의 통계적 특성을 분석 한 결과 HMM의 의한 신호모델링이 적합한 것으로 나타났다. 본 연구에서는 다양한 질병을 나타내는 심음신호를 HMM을 이용하여 모델링 하고 인식성능이 심음신호의 클러스터링에 따라서 많이 좌우되는 것을 알 수 있었다. 또한 실제 환경에서의 심음신호는 그 시작과 끝나는 시점이 정해지지 않은 연속신호이다. 따라서 HMM을 이용한 심음분류를 위해서는 연속적인 심음신호로부터 한 사이클의 분할된 심음을 추출할 필요성이 있다. 일반적으로 수동분할은 분할오류를 발생시키며 실시간 심음인식에 적합하지 않으므로 분할과정이 필요치 않는 ergodic형 HMM을 변형하여 사용할 것을 제안하였다. 그리고 제안된 HMM은 연속심음을 이용한 분류실험에서 매우 높은 성능을 보임을 알 수 있었다.

• 센서학회지
• /
• 제20권2호
• /
• pp.107-113
• /
• 2011

LSPR(Localized Surface Plasmon Resonance) sensor measures the refractive index change on the sensor surface. The detection of biological reaction with the unknown refractive index needs to be converted into the signal sensitivity for the refractive index change for comparison with other measurements. To find the signal sensitivity, the three steps of signal processing are proposed, which are signal modeling, signal calibration and signal normalization of LSPR sensor. The detected signal of biotin-streptavidin interaction has been converted into unit of [RU](Resonance Unit) using the proposed method. The converted signal directly can be compared with the other sensors including commercialized one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2632-2635
• /
• 2003

This paper designs a software signal generator for the new GPS L2 civil signal. The CM/CL code and the message structure of L2CS described in GPS ICD PPIRN-200C-007 are used in designing the signal generator. The output of the GPS signal generator is designed as the sampled IF data with the sampling frequency 5.7MHz and stored in the binary data format. By analyzing both the spectrum characteristics of the output signal and the correlation properties of the CM/CL code, the validation of the designed GPS signal generator is shown. It should be mentioned that the modeling of the GPS satellite constellation and the error sources remains for implementing the software space segment of GPS.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.74-80
• /
• 2016

본 논문에서는 정지궤도위성신호분석을 수행하는 정지궤도위성신호 수신분석 도구모델, 정지궤도위성 항법 메시지 분석을 수행하는 정지궤도 메시지 분석도구 모델로 구성된 위성통신국의 운용시험평가 도구의 모델링과 구현결과를 기술한다. 또한, 이러한 위성 통신국의 운용시험평가 도구에 시뮬레이션된 신호를 생성하여 제공할 수 있는 GEO위성과 위성통신국의 소프트웨어 모델의 일부를 소프트웨어적으로 모델링하고 구현한 결과를 기술하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제22권4E호
• /
• pp.141-149
• /
• 2003

As music of digital form has been widely used, many people have been interested in the automatic extraction of natural information of music itself, such as key of a music, chord progression, melody progression, tempo, etc. Although some studies have been tried, consistent and reliable results of musical information extraction had not been achieved. In this paper, we propose a method to extract chord and tempo information from general polyphonic music signals. Chord can be expressed by combination of some musical notes and those notes also consist of some frequency components individually. Thus, it is necessary to analyze the frequency components included in musical signal for the extraction of chord information. In this study, we utilize a sinusoidal modeling, which uses sinusoids corresponding to frequencies of musical tones, and show reliable chord extraction results of sinusoidal modeling. We could also find that the tempo of music, which is the one of remarkable feature of music signal, interactively supports the chord extraction idea, if used together. The proposed scheme of musical feature extraction is able to be used in many application fields, such as digital music services using queries of musical features, the operation of music database, and music players mounting chord displaying function, etc.