• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.890-898
• /
• 2001

4H-SiC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco\`s 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8 V pinch off voltage, under V$\_$GS/=0 V, V$\_$DS/=25 V conditions, I$\_$DSS/=270 mA/mm, G$\_$m/=52.8 ms/mm were obtained. Through the power simulation 2 GHz, at the bias of V$\_$GS/-4 V md V$\_$DS/=25 V, 10 dB Gain, 34 dBm (1dB compression point)output porter, 7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.d.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.229-232
• /
• 2001

4H-SIC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco's 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8V pinch off voltage, under $V_{GS=0V}$, $V_{DS=25V}$ conditions, $I_{DSS=270㎃}$mm, $G_{m=45㎳}$mm were obtained. Through the power simulation 2GHz, at the bias of $V_{GS=-4V}$ and $V_{DS=25V}$, 10dB Gain, 34dBm(1dB compression point)output power, 7.6W/mm power density, 37% PAE(power added efficiency) were obtained.d.d.d.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.253-258
• /
• 2004

To get accurate information about the defect from the test signal, NDT engineers should have a good knowledge on forward problems. Such knowledge is usually obtained by a lot of testing experiences. Another why of obtaining such knowledge is to build a database containing lots of defect information and their corresponding signals. However, the archiving of raw test data would require a lot of storage space. In this paper, an economic way of storing signals is studied by using Fourier descriptors. Instead of saving raw signal data, Fourier descriptors are saved and the storage spare is reduced. Of course, the defect signal can be reconstructed from the stored descriptors. By using differential ECT signals produced by numerical modeling and experiment, the savings of 85% from the original signal and $57{\sim}65%$ from the filtered signal in the storage space were confirmed. The similarity of the reconstructed signal and the original signal was also demonstrated. This Fourier descriptor approach could contribute significantly in building differential signal databases.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.542-548
• /
• 2012

This study presents a new method of system modeling by using the Discrete Fourier Transform for the position control system of DC Motor. And the proposed method is similar to the method of System Identification by analysis of correlation of the measured input-output data. The measured output signals are transformed to the frequency domain using DFT. The Fourier Spectrum of the transformed signals is used for knowing to the feature of having an important effect on the system. And transfer function of the second order system is estimated by the dominant parameter which is computed in the magnitude and the phase of Fourier spectrum of the transformed signals. In addition, the output signal includes the unique feature of system. So, although the basic parameter of the system is unknown for us, the proposed method has an advantage to system modeling. And the controller is easily designed by the estimated transfer function. Thus, in this paper, the proposed method is applied to the system modeling for the position control system of DC Motor and the PD-controller is designed by the estimated model. And the efficiency and the reliability of the proposed method are verified by the experimental result.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.290-296
• /
• 2005

This paper proposes the modeling scheme of the Miniature Universal Testing Machine (MUTM) composed of 36 thin-beam-type bimorph PZTs and the control algorithm to minimize the residual vibration of the MUTM in the dynamic testing of specimens. In the operation of the MUTM, hysteresis, residual displacement and vibration of it are major issues. From the analysis of the MUTM behaviors, the hysteresis is described by the curving fitting scheme with the function of an input voltage. The dynamic characteristics of the MUTM are identified by the frequency domain modeling technique based on the experimental data. The interested bandwidth is focused on 125-315HZ for effective modeling and control. For the robust vibration control of the MUTM, the sliding mode control and the Kalman filter as observer are proposed. The paper also proposes the best input signal type to operate the MUTM effectively. The feasibility of the proposed modeling scheme and control algorithm are tested and verified experimentally.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.1
• /
• pp.54-61
• /
• 2008

This paper presents a method for reducing modelling error in the linear motion system with voicecoil actuator (VCA). A model of linear motion system composed of a mechanism and control was prepared to verify the proposed method. In modeling of the system, the damping coefficient obtained experimentally is applied to the model in order to consider the effect of the viscous friction for the moving part in VCA. The response velocity of VCA for duty ratio of PWM signal was analyzed in the time domain. Consequently, the relation between velocity and duty ratio was obtained. The result from the experiment showed an error of 9% when compared with that of simulation. In order to reduce the modeling error, impedance variation according to input frequency was analyzed, and equivalent impedance with multi-frequency was applied to the control part. As a result, the modeling error decreased to 5%.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.9
• /
• pp.439-446
• /
• 2001

This paper considers the design technique of the real-time control algorithm to implement the electronic interlocking system which is the most important station control system in railway signal field. The proposed technique consists of the structure design and the detail design which are based on the ROOM(Real-Time Object-Oriented Modeling). The structure design is designed with a modeling using the heuristic search technique which, at first, catch and make out the specific requested condition, and then, is designed on the requested condition. The detail design can be implemented if it may get the satisfying values through the repetitive modeling after comparing and examining the data obtained from the structure design in order for the more reliable and accurate system to be implemented. The technique proposed in this paper is implemented with C++ language which is easy to be transferred and compatible with the existing interfaces, and also the operating system is designed and simulated on the VRTX which is a real-time operating system. This proposed technique is applied to the typical station model in order to prove the validity as verifying the performance of the modeled station.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.2
• /
• pp.107-111
• /
• 2003

In the power-line communication systems, there are many factors of noise and attenuation in the power-line channels, because they were designed for not the communication but the power transmission. Also the transfer function of the channels is highly changed with the topology and the load of the power-lines. To cope with these poor channel situation, channel modeling, one of the many studies in progress, is being studied hard. Channel modeling is essential to apply the active schemes to overcome the bad channel(e.g. modulation technique, channel coding, signal coupling & filtering, etc.) to the power-line communications. In this paper, we have realized the statistical model(this model is suggested as the channel modeling method for the power-line channels) that is combined the transfer function with the various noises. And we have compared and examined the results with the measured data. Also we have studied the plan which can effectively establish the channel data base for the channel information consisted of the parameters that are derived from this modeling, and we have studied the plan to utilize the data base.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.476-481
• /
• 2004

This paper proposes the modeling scheme of the Miniature Universal Testing Machine (MUTM) composed of 36 thin-beam-type bimorph PZTs and the control algorithm to minimize the residual vibration of the MUTM in the dynamic testing of specimens. In the operation of the MUTM, hysteresis, residual displacement and vibration of it are major issues. From the analysis of the MUTM behaviors, the hysteresis is described by the curving fitting scheme with the function of an input voltage. The dynamic characteristics of the MUTM are identified by the frequency domain modeling technique base on the experimental data. The interest bandwidth is focused on 125-315HZ for effective modeling and control. For the robust vibration control of the MUTM, the sliding mode control and the Kalman filter as observer are proposed. The paper also proposes the best input signal type to operate the MUTM effectively. The feasibility of the proposed modeling scheme and control algorithm are tested and verified experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.942-947
• /
• 2003

An important signal processing problem in PVDF sensor is the restoration of surface information from electric sensing signals. The objectives of this research are to design a new texture sensing system and to develop a new signal processing algorithm for signals from the sensor to be tangibly displayed by tangible interface systems. The texture sensing system is designed to get surface information with high resolution and dynamic range. First, a PVDF sensor is made of piezoelectric polymer (polyvinylidene fluoride) strips molded in a silicon rubber and attached in a rigid cylinder body. The sensor is mounted to a scanning system for dynamic sensing. Secondly, a new signal processing algorithm is developed to restore surface information. The algorithm consists of the two-dimensional modeling of the sensor using an identification method and inverse filtering from sensing signals into estimated surface information. Finally the two-dimensional surface information can be experimentally reconstructed from sensing signals using the developed signal processing algorithm.