• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2177-2184
• /
• 2012

A different and effective method for indoor positioning system is needed and increased it's importance compare to the outdoor GPS based method. The FingerPrint positioning method is known as a superior method in indoor positioning system that maintains signal strength patterns for RPs(Reference Points) in database and compare the DB with the measured real-time signals on the mobile device. FingerPrint positioning method is necessary to establish an accurate database, but errors can occur by several factors. In this paper, we analyze the signal patterns of each terminal in accordance with connection state of access point and trace that the error in accordance with connection state of access point can be an important error in FingerPrint DB configuration through an experimental case study.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.3E
• /
• pp.69-73
• /
• 2007

This paper presents an efficient algorithm to retrieve similar music files from a large archive of digital music database. Users are able to navigate and discover new music files which sound similar to a given query music file by searching for the archive. Since most of the methods for finding similar music files from a large database requires on computing the distance between a given query music file and every music file in the database, they are very time-consuming procedures. By measuring the acoustic distance between the pre-classified music files with the same type of emotion, the proposed method significantly speeds up the search process and increases the precision in comparison with the brute-force method.

• Korean Management Science Review
• /
• v.29 no.2
• /
• pp.79-90
• /
• 2012

Focusing on the rapid market penetration of smart phones, the importance of LBS (Location Based Service) is drastically increased. However, traditional GPS method has critical weakness caused by limited availability, such as indoor environment. WPS is newly attractive method as a widely applicable positioning method. In WPS, RSSI (Received Signal Strength Indication) data of all Wi-Fi APs (Access Point) are measured and stored into a huge database. The stored RSSI data in database make single radio fingerprint map. By the radio fingerprint map, we can estimate the actual position of target point. The essential factor of radio fingerprint database is data integrity of RSSI. Because of millions of APs in urban area, RSSI measurement data are seriously contaminated. Therefore, we present the unified filtering method for RSSI measurement data. As the results of filtering, we can show the effectiveness of suggested method in practical positioning system of mobile operator.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.89-96
• /
• 2006

Nondestructive evaluation using surface waves needs an analytical solution for the reference value to compare with experimental data. Finite element analysis is very powerful tool to simulate the wave propagation, but has some defects. It is very expensive and high time-complexity for the required high resolution. For those reasons, it is hard to implement an optimization problem in the actual situation. The developed engine in this paper can substitute for the finite element analysis of surface waves propagation, and it accomplishes the fast analysis possible to be used in optimization. Including this artificial intelligence engine, most of soft computing algorithms can be applied on the special database. The database of surface waves propagation is easily constructed with the results of finite element analysis after reducing the dimensions of data. The principal wavelet-component analysis is an efficient method to simplify the transient wave signal into some representative peaks. At the end, artificial neural network based on the database make it possible to invent the artificial intelligence engine.

• Speech Sciences
• /
• v.10 no.1
• /
• pp.85-94
• /
• 2003

In this paper an algorithm to reduce the size of Text-to-Speech database is proposed. The algorithm is based on the characteristics of Korean phonemic units. From the initial database, a reduced phoneme unit set is induced by articulatory similarity of concatenating phonemes. Speech data is read by one female announcer for 1000 phonetically balanced sentences. All the recorded speech is then segmented by phoneticians. Total size of the original speech data is about 640 MB including laryngograph signal. To synthesize wave, RE-PSOLA (Residual-Excited Pitch Synchronous Overlap and Add Method) was used. The voice quality of synthesized speech was compared with original speech in terms of spectrographic informations and objective tests. The quality of the synthesized speech is not much degraded when the size of synthesis DB was reduced from 320 MB to 82 MB.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.1
• /
• pp.31-38
• /
• 2013

Patients with heart disease need long-term monitoring of the electrocardiogram (ECG) signal using a portable electrocardiograph. This trend requires the miniaturization of data storage and faster transmission to medical doctors for diagnosis. The ECG signal needs to be utilized for efficient storage, processing and transmission, and its data must contain the important components for diagnosis, such as the P wave, QRS-complex, and T wave. In this study, we select the vertex which has a larger curvature value than the threshold value for compression. Then, we reconstruct the compressed signal using by radial basis function interpolation. This technique guarantees a lower percentage of root mean square difference with respect to the extracted sample points and preserves all the important features of the ECG signal. Its effectiveness has been demonstrated in the experiment using the Massachusetts Institute of Technology and Boston's Beth Israel Hospital arrhythmia database.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2008

This paper studies a method to minimize the baseline wandering that make hard to extract R-wave in ECG. This method uses a difference signal between ECG and ascending slope tracing waves to minimize the baseline wandering. When the slope of ECG signal maintains the value or falls, the ascending slope tracing wave follows ECG signal directly, and this wave holds that value of ECG signal when the slope begins to rises in a certain time(=hold time). After this hold time, this wave traces ECG signal again. This method has been applied to MIT/BIH database to verify its efficacy and validity in practical applications.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.107-117
• /
• 2014

This paper proposed the method of removing baseline drift by eliminating local maxima such as P, R, T-wave signal region and local minima Q, S-wave signal region. We applied morphology-pair operations improved from morphology operation to the ECG signal. To eliminate overshoot in the result of morphology-pair operation, we apply median value operation to the result of morphology-pair operation. We use MIT/BIH database to estimate the proposed algorithm. Experiment result show that proposed algorithm removing baseline drift effectively without orignal ECG signal distortion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3789-3809
• /
• 2014

Radio environment maps (REMs) and geolocation database represent an important source of information for the operation of cognitive radio networks, replacing or complementing spectrum sensing information. This paper provides a survey of methods for constructing the radio frequency layer of radio environment map (RF-REM) using distributed measurements of the signal levels at a given frequency in space and time. The signal level measurements can be obtained from fixed or mobile devices capable of sensing radio environment and sending this information to the REM. The signal measurements are complemented with information already stored in different REM content layers. The combined information is applied for estimation of the RF-REM layer. The RF-REM construction methods are compared, and their advantages and disadvantages with respect to the spatial distribution of signal measurements and computational complexity is given. This survey also indicates possible directions of further research in indirect RF-REM construction methods. It emphasizes that accurate RF-REM construction methods should in the best case support operation with random and clustered signal measurements, their operation should not be affected by measurements outliers, and it must estimate signal levels comparably on all RF-REM locations with moderate computational effort.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1755-1777
• /
• 2022

The development of wireless communication technology has led to the underutilization of radio spectra. To address this limitation, an intelligent cognitive radio network was developed. Specific emitter identification (SEI) is a key technology in this network. However, in realistic non-cooperative scenarios, the system may detect signal classes beyond those in the training database, and only a few labeled signal samples are available for network training, both of which deteriorate identification performance. To overcome these challenges, a meta-learning-based open-set identification system is proposed for SEI. First, the received signals were pre-processed using bi-spectral analysis and a Radon transform to obtain signal representation vectors, which were then fed into an open-set SEI network. This network consisted of a deep feature extractor and an intrinsic feature memorizer that can detect signals of unknown classes and classify signals of different known classes. The training loss functions and the procedures of the open-set SEI network were then designed for parameter optimization. Considering the few-shot problems of open-set SEI, meta-training loss functions and meta-training procedures that require only a few labeled signal samples were further developed for open-set SEI network training. The experimental results demonstrate that this approach outperforms other state-of-the-art SEI methods in open-set scenarios. In addition, excellent open-set SEI performance was achieved using at least 50 training signal samples, and effective operation in low signal-to-noise ratio (SNR) environments was demonstrated.