• Journal of information and communication convergence engineering
• /
• v.19 no.3
• /
• pp.131-135
• /
• 2021

The interference between closely placed co-coverage satellites was analyzed. In general, a satellite network may use different orthogonal polarizations and frequencies to increase the throughput of a satellite. However, when orthogonal linear polarization (horizontal polarization and vertical polarization) or orthogonal circular polarization (left-handed circular polarization and right-handed circular polarization) is used, the signal from one polarization sense to another may be coupled, resulting in cross-polarization interference. This signal-coupling arises due to the finite value of the cross-polarization discrimination of the earth station. In this study, field equations were used to analyze the interference between adjacent satellites using co-frequency. The level of interference was compared to that when two adjacent satellites used the same polarization. The simulation results show that the interference mainly depends on the off-axis co-polar pattern and the cross-polar pattern of the earth station antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1255-1261
• /
• 2014

Based on the radio wave measurement of korean ocean-based DGPS by season, in this paper, the service coverages of ocean-based DGPS reference stations were analyzed according to the climate and season. The signal strengths and signal-to-noise ratios in the land service areas that are provided by ocean-based DGPS reference stations were measured. The ocean-based DGPS reference station except reference stations on the mountainous terrain and the low ground conductivity provide more than 68% service area in comparison with the designed land service coverage providing by the ocean-based DGPS reference stations. To provide the designed service area that is unrelated to a season, it is necessary to install and operate the DGPS reference station with good ground conductivity and high efficiency antenna. Also, the poor service regions which is generated by obstacles of electric wave on pathway can be resolved by the double service area providing by land-based DGPS reference stations.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• International Journal of Railway
• /
• v.9 no.2
• /
• pp.36-40
• /
• 2016

TETRA communication system is very versatile system which can transmit voice + data and packet data optimized. Direct mode operation permits to connect between mobiles when mobile stain is out of coverage of networks. It can be more secure communication channel for railway signaling systems. Railway signaling systems use many of wayside signal equipment, which require many maintenance efforts and budget. Many railway authorities want to reduce and replace the wayside equipment. Radio based signaling systems are one of candidate for replacing the conventional signaling systems. The radio based signaling systems can replace track circuit and wayside signal. The radio systems permit to connect between control centers and trains. The radio systems have to ensure high quality of the connectivity more or equal to the existed track circuits. We studied the application of TETRA systems for railway radio systems for bridging between train control centers and trains. We provide an operation scenario for radio based train control system to ensure the safety require to the existed trains control system and satisfied the existed operational availability. We showed the data transmission speed, maximum bit error rate, and data coding for the radio-based signal system using TETRA systems.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1109-1114
• /
• 2018

Electroencephalogram (EEG) is a tool used to study brain activity caused by external stimuli. In this process, artifacts are mixed and it is easy to distort the signal, so post-processing is necessary to remove it. Independent Component Analysis (ICA) is a widely used method for removing artifact. This method has a disadvantage in that it has excellent performance but some loss of brain wave information. In this paper, we propose a method to reduce EEG information loss by restricting the filter coverage using eye blink information obtained from Eyetracker. We then compared the results of the proposed method with the conventional method using quantization methods such as Signal to Noise Ratio (SNR) and Spectral Coherence (SC).

• ETRI Journal
• /
• v.44 no.5
• /
• pp.715-732
• /
• 2022

Despite the successful launch of Advanced Television Systems Committee (ATSC) 3.0 broadcasting worldwide, broadcasters are facing obstacles in constructing void-less large-scale single-frequency networks (SFNs). The bottleneck is the absence of decent on-channel repeater (OCR) solutions necessary for SFNs. In the real world, OCRs suffer from the maleficent feedback interference (FI) problem, which overwhelms the desired input signal. Moreover, the undesired multipaths between studio-linked transmitters and the OCR deteriorate the forward signals' quality as well. These problems crucially restrict the feasibility of conventional OCR systems, arousing the strong need for cost-worthy advanced OCR solutions. This paper presents an ATSC 3.0-specific solution of advanced OCR that solves the FI problem and refines the input signal. To this end, the FI canceler and channel equalizer functionalities are carefully implemented into the OCR system. The presented OCR system is designed to be fully compliant with the ATSC 3.0 specifications and performs a fast and efficient signal processing by exploiting the specific frame structure. The real product of ATSC 3.0 OCR is fabricated as well, and its feasibility is verified via field and laboratory experiments. The implemented solution is installed at a commercial on-air site and shown to provide substantial coverage gain in practice.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.69-75
• /
• 2010

Advanced T-DMB(Terrestial DMB )system which is a new portable mobile broadcasting system has been developed to increase data rate up to double of conventional T-DMB in same bandwidth while maintaining backward compatibility, using hierarchical modulation method. The Advanced T-DMB system realize high qualification of conventional T-DMB system by adding BPSK signal or QPSK signal as enhanced layer to existing DQPSK signal. The enhanced layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of existing T-DMB service area. But this causes the enhanced layer signal of Advanced T-DMB susceptible to fading effect in transmission channel. In this paper we applied the duo-binary turbo code which has powerful error correction capability to the enhanced layer signal for compensating channel distortion. And the computer simulation results about the performance of the duo-binary turbo code in Advanced T-DMB system are presented along with analysis comments.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2009

In this parer, we propose a new way of improving DGNSS service using combination of multiple SBAS information. Because SBAS uses Geostationary Earth Orbit (GEO) satellites, it has very large coverage but it can be unavailable in urban canyon because of visibility problem. R. Chen solved this problem by creating Virtual Reference Stations (VRS) using the SBAS signal [1]. VRS converts SBAS signal to RTCM signals corresponding its location, and broadcast the converted RTCM signals over the wireless internet. This method can solve the visibility problem cost effectively. Furthermore it can solve DGNSS coverage problem by creating just a transmitter instead of a reference station. Developing above method, this paper proposes the methods that integrate two or more SEAS signals into one RTCM signal and broadcast it. In Korea, MSAS signal is available even though it is not officially certified for Korean users. As a Korean own SBAS-like system, there is the internet-based KWTB (Korean WADGPS Test Bed) which we developed and released at ION GNSS 2006. As a result, virtually two different SBAS corrections are available in Korea. In this paper, we propose the integration methods for these two independent SBAS corrections and present the test results using the actual measurements from the two systems. We present the detailed algorithm for these two methods and analyze the features and performances of them. To verify the proposed methods, we conduct the experiment using the logged SBAS corrections from the two systems and the RINEX data logged at Dokdo monitoring station in Korea. The preliminary test results showed the improved performance compared to the results from two independent systems, which shows the potential of our proposed methods. In the future, the newly developed SBASs will be available and the places which can access the multiple SBAS signals will increase. At that time, the integration or combination methods of two or more SBASs will become more important. Our proposed methods can be one of the useful solutions for that. As an additional research, we need to extend this research to the system level integration such as the concept of the decentralized W ADGPS.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.109-116
• /
• 2017

In this paper, we propose an Internet of Things (IoT) platform for ocean observation buoys. The proposed system consists of various sensor modules, a gateway, and a remote monitoring site. In order to integrate sensor modules with various communications interfaces, we propose a controller area network (CAN)-based sensor data packet and a protocol for the gateway. The proposed scheme supports the registration and management of sensor modules so as to make it easier for the buoy system to manage various sensor modules. Also, in order to extend communication coverage between ocean observation buoys and the monitoring site, we implement a multi-hop relay network based on a mesh network that can provide greater communication coverage than conventional buoy systems. In addition, we verify the operation of the implemented multi-hop relay network by measuring the received signal strength indication between buoy nodes and by observing the collected data from the deployed buoy systems via our monitoring site.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2010

Electrostatic capacitance measurement method in a fine hose was proposed, in which two ring-type electrodes were disposed on the hose in the direction of fluid flow instead of the conventional face-to-face electrodes. With the proposed electrode structure, we realized a Ringer's solution exhaustion detector for an IV(invasive vein) injection set. On a 4 mm-diameter hose of IV set, we disposed two ring-type electrodes of 10 mm width at a distance of 5 mm each other and obtained 0.72 pF and 2.51 pF for air and 10 % dextrose Ringer's solution in the hose, respectively. The capacitance between the two electrodes varied with the hose-wraparound coverage of electrode as well as the width of electrode and the distance between the electrodes. For hose-wraparound electrode coverage of 75 %, the capacitance varied from 0.62 pF to 1.98 pF with the Ringer's solution level between the two electrodes. A charge amplifier converted the capacitance. variation into electric signal and a comparator was used to detect whether Ringer's solution was exhausted or not. The result was delivered to a host using a RF transmitter with 320 MHz carrier frequency.