• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.262-267
• /
• 1998

In Synthetic Aperture Radar(SAR) imaging, the echoed data are collected by moving radar's position with respect to the target area, and this operation actually gives effect of synthesizing aperture size, which in turn gives better cross range resolution of reconstructed target scene. Among several inversion scheme for SAR Imaging, we uses an inversion scheme which uses no approximation in wave propagation analysis, and try to verify whether the collected data with synthesized aperture actually gives the same support as that with physical aperture in the same size. To do this, we make a signal subspace comparison of two imaging models with physical and synthesized arrays, respectively. Theoretical comparison and numerical analysis using Gram-Schmidt procedures had been performed. The results showed that the synthesized array data fully span the physical array data with the same system geometry and strongly support the proposed inversion scheme valuable in high resolution radar imaging.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.116-117
• /
• 1999

Optical fiber networks for microwave signal processing have been investigation . Theoretical and experimental results are presented in Z-shaped Double-Coupler Optical Resonator. The use of Mason's rule to calculate transfer functions greatly simplified the analysis in our model. A good comparison between modelling and experiment is presented.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.73-76
• /
• 2000

본 논문에서는 기존의 8개의 삼각형을 이용한 특징추출 알고리즘을 개선하여 8의 배수로 특징의 수를 증가시키는 알고리즘을 제안하고, 블록기반 특징추출의 알고리즘과 성능을 비교한다.

• 비파괴검사학회지
• /
• 제25권3호
• /
• pp.201-208
• /
• 2005

In this paper, absolute and differential eddy current signals from various defects in the steam generator tube are numerically predicted and their signal slope characteristics are investigated. The signal changes due to frequency increase are also observed. After studying signal patterns from various defects and frequencies, the analysis of mixed defect signals affected by the presence of a ferromagnetic support plate is attempted. For the signal prediction, axisymmetric finite element modeling is used and this leads us to the slope angle analysis of the signal. Results show that differential signals are useful for locating the position of a defect under the support plate, while absolute signals are easy to presume and interpret even though the effect of support plate is mixed. Combined use of these two types of signals will help us accomplish a more reliable inspection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.702-704
• /
• 2003

In this paper, analysis of bobbin probe signal in steam generator tube with bulge defect on CE system 80 nuclear power plant is represented. The CE system 80 steam generator is adopted in ULJIN-4 nuclear power plant. From Maxwell's equation, the electromagnetic governing equation for eddy current problem is derived and by performing the finite element formulation the 3-dimensional finite element code with brick element is developed. For the ease of the comparison the numerical results with experimental ones, the calculated signals are adjusted by using the ASME standard 100[%] through hole signal. For analysis of the effect of variation of the bulge depth on the impedance signal 0.2[mm] and 0.4[mm] depth of bulge defect signals are calculated and analyzed. As the depth of the bulge defect is increased, the magnitude of the signal is increased, too. But the rate of the increment of the signal is less than that of the depth of defect. From the result of this paper, we can obtained the information of the effect of bulge defect on the impedance signal.

• International journal of advanced smart convergence
• /
• 제3권1호
• /
• pp.20-24
• /
• 2014

To compare body signal, was designed the F-B function system on the body movement for the comfortable state. To detect subject of the normal state, was decided on the base of physical signal in the body movement. There are to detect the condition of Vision, Vestibular, Somatosensory and CNS. Vision condition was verified a variation of greater average (Vi-${\Phi}_{AVG-AVG}$) was presented slightly greater at $17.424{\pm}9.65$ unit. Vestibular condition was identified a variation of slightly greater average (Ve-${\Phi}_{AVG-AVG}$) was presented at $9.068{\pm}1.478$ unit. Somatosensory condition was checked a variation of smaller average (So-${\Phi}_{AVG-AVG}$) was presented slightly smaller at $2.79{\pm}0.419$ unit. CNS condition was confirmed a variation of diminutive smaller average (C-${\Phi}_{AVG-AVG}$) was presented slightly larger at $0.557{\pm}0.153$ unit. As the model depends on the F-B function system of body movement, average values of these perturbation were computed F-B function comparison data. These systems will be to infer a data algorithm and a data signal processing system for the evaluation of the stability.

• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.515-523
• /
• 1997

A high resolution algorithm is presented for resolving multiple coherent spread spectrum signals that are incident on an equispaced linear array. Unlike the conventional noise-eigenvector based methods, this algorithm makes use of the signal eigenvectors of the array spectral density matrix that are associates with eigenvalues that are larger than the sensor noise level. Simulation results are shown to demonstate the high performance of the proposed approach in comparison with MUSIC in which coherent signal subspace method (CSM) is employed.

• Journal of Life Science
• /
• 제11권2호
• /
• pp.94-98
• /
• 2001

Type I signal peptidase cleaves the signal sequence from the amino terminus of membrane and secreted proteins afters these protein insert across the membrane. This enzyme serves as a potential target for the development of novel antibacterial agents due to its unique physiological and biochemical properties. Despite considerable research, the signal peptidase assay still remains improvement to provide further understanding of the mechanism and high-throughput inhibitor screening of this enzyme. In this paper, three known signal peptidase assays are tested with an E. coli D276A mutant signal peptidase to distinguish the sensitivity of each assays. In vitro assay using the procoat synthesized by in vitro transcription translation shows that the D276A signal peptidase I was inactive while in vivo processing of pro-OmpA expressed in the temperature-sensitive E. coli strain IT41 as well as in vitro assay using pro-OmpA nuclease A substrate show that D276A signal peptidase I has activity like wild-type signal peptidase. These results suggest that in vitro assay using the pro-OmpA nuclease A and in vivo pro-OmpA processing assay are more sensitive monitors than in vitro assay using the pro-coat. In conculsion, caution should be used when interpreting the in vitro results using the procoat.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.45-45
• /
• 2006

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.366-368
• /
• 2006

Electronic warfare Support(ES) system measures pulse characteristics for received RF signals that received from all directions. ES system discriminates the pulse trains that have a rule, correlationship, continuance from collected data and analyze the characteristics of the data, and identify the emitters by comparison with emitter identification data(EID). Because pulse density is very high and various signal source exists at modem signal environments, high-speed and accurate signal analysis is needed for realtime countermeasure to emitters. Grouping alleviates the load of signal analysis process and supports reliable analysis. In this paper, we suggest an adaptive clustering scheme regarding signal patterns.