• 대한전자공학회논문지SD
• /
• 제40권9호
• /
• pp.651-657
• /
• 2003

얇은 중간 금속층을 가지는 측면 연마 광섬유 결합기를 이용한 편광분리기를 구현하였다. 실험 결과는 적절한 두께론 가지는 중간 금속층은 두 측면 연마된 광섬유 사이에서 TE 편광 성분의 광결합은 차단시키는 반면 TM 편광성분의 광결합은 허용함을 보여주었다. 측면 연마 광섬유를 이용한 편광분리기 설계 및 제작 기법을 기술하였다. 제작된 편광분리기는 TE와 TM 편광에 대하여 18dB와 23dB의 분리비를 보였다. 삽입손실은 TE 편광의 경우 0.7dB, TM 편광의 경우 1.3dB로 측정되었다.

• 센서학회지
• /
• 제19권6호
• /
• pp.428-434
• /
• 2010

In this study, a novel gas sensor based on evanescent field coupling between single mode side polished fiber and solvatochromic dye dispersed polymer waveguide was demonstrated. We fabricated a side polished optical fiber device as a volatile organic compounds gas detector. Solvatochromic dye was coated on the top of the side polished optical fiber to take advantage of evanescent field coupling. The solvatochromism can be defined as the phenomenon whereby a compound changes color, either by a change in the absorption or emission spectra of molecule, when reacted in different VOCs. The device reacted to polarity gases like a hexane, butane, xylene etc. The resonance wavelength was shifted by the xylene concentration which range was 0.1 ppm ~ 100 ppm. Also, the response with the concentration was lineer and the detection limit was 0.1 ppb.

• 센서학회지
• /
• 제32권1호
• /
• pp.51-54
• /
• 2023

We investigated a humidity sensor based on a polyimide-coated side-polished optical fiber. The polyimide film absorbed moisture, causing the resonant wavelength of the sensor to shift to a longer wavelength owing to the changes in the optical properties of the film. The experimental results showed that the resonant wavelength of the device shifted by 17-18 nm when relative humidity changed from 30% to 90%.

• 한국전기전자재료학회논문지
• /
• 제28권8호
• /
• pp.513-517
• /
• 2015

We proposed and demonstrated a simultaneous measurement method to detect the refractive index and temperature of a medium using a side-polished fiber involving FBG (fiber Bragg grating). The temperature of a medium was obtained by using the Bragg wavelength shift of FBG, while the refractive index of medium were calculated by using the transmission loss. The Bragg wavelength is independent on the refractive index of the covering medium placed on surface of side-polished fiber, while the transmission loss at off-Bragg wavelength highly depends on the environmental temperature because of thermo-optic effect of the medium.

• 센서학회지
• /
• 제16권4호
• /
• pp.254-258
• /
• 2007

A novel cure sensor based on the side-polished single mode fiber has been proposed and demonstrated. Two different UV curable epoxies were used to verify the feasibility of the side-polished single mode fiber as a high sensitivity cure sensor. The volume change of the epoxy by UV curing results in a corresponding change of the refractive index. The sensor can be used to monitor the curing process, the refractive index variation and the volume change of epoxy in real time during the UV curing process. In addition, small birefringence of the epoxy film can be detected using the sensor.

• 센서학회지
• /
• 제14권4호
• /
• pp.286-290
• /
• 2005

We have demonstrated a refractometer for liquid based on a side-polished fiber. The device consists of a side-polished single mode fiber and a rectangular space which plays a role of the multimode planar waveguide when it is infused with a liquid. We presented a simple method to acquire the refractive index of a liquid by use of the spacings of periodic resonance wavelengths of the device. The resolution of the fabricated refractometer was order of $10^{-5}$

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.166-169
• /
• 2008

The submersion monitoring system based on a reflective side-polished optical fiber submersion sensor with an optical fiber mirror was shown to be an effective alarm system with remote monitoringwhen the drainage capacity of a common utility duct is exceeded due to heavy rainfall. The proposed sensor was connected to an existing installed optical fiber network at a height of 250mm in a common utility duct, and then tested under sample materials(distilled water, river water, sea water, foul water, muddy water, petroleum, edible oil) at a distance of 1km from the sensor for remote sensing. In experiments, the proposed real-time sensor system reduced maintenance cost and improved monitoring efficiency by using a reflection-type side-polished optical fiber submersion sensor efficient for remote monitoring of a common utility duct.

• 한국광학회지
• /
• 제21권5호
• /
• pp.190-194
• /
• 2010

본 연구에서는 측면연마 된 광섬유 브래그 격자를 측면 연마하고 폴리머 상부층(overlay)를 형성시켜 외부 굴절률과 온도를 동시 측정할 수 있는 광섬유 센서 소자를 제안하였다. 외부굴절률 변화에 민감하지 않는 광섬유 브래그 격자를 이용하여 온도를 측정하고 격자를 측면 연마한 후 폴리머 코팅에 의해 소산장 결합을 유도하여 외부 굴절률 변화를 측정하게 된다. 측면 연마된 광섬유 브래그 격자의 온도 민감도는 0.01 nm/oC로 측정되었고 폴리머 상부층의 온도 민감도는 -0.58 nm/oC로 측정되었고 선형구간 별(1.33-1.39, 1.39-1.42, 1.42-1.44) 굴절률 민감도는 498.8 nm/RIU, 694.9 nm/RIU, 1312 nm/RIU로 측정되었다.

• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.180-187
• /
• 2003

A theoretical presentation by using a three-dimensional finite difference beam propagating method (3-D FD-BPM) for the evanescent coupling is offered with respect to the refractive indexes between a side-polished optical fiber and an infinitely planar waveguide with a conductor cladding (PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with a perfect conductor (PEC) on one side. The coupling and propagation of light are found to depend on both the relationship between the refractive index values of two structures and the configuration of the side-polished fiber used in the PWGCC. The spreading of light in the unconfined direction of a PWGCC is presented with the distribution of electric fields in xy - plane and the absolute amplitude of electric fields along the x and y axis. The power of the light propagation in a fiber decreases exponentially along the fiber axis as it is transferred to the PWGCC, where it is carried away.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.33-38
• /
• 2004

측면 연마된 편광 유지 광섬유와 폴리머 평면도파로가 결합된 비대칭 방향성 결합기를 이용하여 가변 광필터를 구현하였다. 소자의 최상부층 위에 형성된 마이크로 스트립 히터에 의하여 유도된 폴리머 평면도파로의 열광학 효과는 결합기의 공진파장을 이동시킨다. 제작된 소자는 720 ㎽의 인가 전력으로 230 ㎚ 이상의 넓은 가변 범위를 보였다.