• Journal of Convergence Korean Medicine
• /
• v.3 no.1
• /
• pp.5-13
• /
• 2022

Objectives: Smoking had a long negative impact on public health. The ingredients of a cigarette are major risk factors for several diseases. Owing to the problems about economic and quality of life, we need to ensure smoking cessation (SC). There are several approaches for SC including pharmacological therapy, nicotine replacement therapy, education, and behavioral intervention. However, due to some limitations, other alternative approaches are gaining popularity. Acupuncture has been reported to have few side effects and be more effective than some conventional treatments in several articles. However, there are no systematic reviews on the comparison of acupuncture combination treatment with other conventional monotherapies. Methods: Randomized controlled trials that used acupuncture as an adjunct treatment for SC will be searched and data will be summarized according to the predefined criteria. The primary outcome will be the abstinence rate, and secondary outcomes will be adverse events and biochemical indicators. We will use Review Manager to perform a meta-analysis, Cochrane Collaboration Risk of Bias tool for the risk of bias assessment, and the Grades of Recommendation, Assessment, Development and Evaluation approach to determine the quality of evidence. We will investigate the efficacy and safety of acupuncture combination treatment for SC with this study. Ethics and dissemination: This study will provide reliable clinical evidence on additional effect of acupuncture on smoking cessation. We will publish our results in a peer-review journal.

• Korean Journal of Ichthyology
• /
• v.35 no.2
• /
• pp.67-74
• /
• 2023

The river pufferfish (Takifugu obscurus) is a valuable species in aquaculture and genetic studies. Usage of fish anesthetics aids in the easier handling of fish during aquaculture. However, there are no studies on appropriate conditions required for effective anesthetization of pufferfish. This study aims to determine the optimal conditions (fish age, water temperature, anesthetic concentration) needed for the most common fish anesthesia, MS-222, to anesthetize T. obscurus. We tested three different water temperatures (20℃, 24℃, and 28℃), three different anesthetic concentrations (125 mg/L, 150 mg/L, and 175 mg/L), and two different fish ages (one- and two-year-old). Appropriate anesthetization conditions for T. obscurus ranged from 150 mg/L to 175 mg/L of MS-222 at 24℃ to 28℃ for one-year-old fish. For two-year-old fish, the appropriate conditions ranged from 150 mg/L to 175 mg/L of MS-222 at 28℃. However, to minimize side effects and risks, 150 mg/L of MS-222 at 24℃ for one-year-old fish and 175 mg/L of MS-222 at 28℃ for two-year-old fish are recommended for effective anesthetization.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.950-957
• /
• 2023

For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3874-3897
• /
• 2023

A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.12-18
• /
• 2023

The effective evacuation strategy according to the accident scenario is crucial to minimize human casualties in the event of toxic gas leak accidents. In this study, the effect of the direction of a building and the location of an industrial complex on the increase in indoor concentration and outdoor diffusion was examined under the same leakage conditions, and effective evacuation criteria were established. In addition, the guidelines for building directions were suggested when constructing buildings that would mitigate human damage caused by chemical accidents. Three scenarios where buildings faced the front, side, and rear of the leakage direction were investigated through CFD simulations. The results revealed that when the building faced the industrial complex, both indoor and outdoor average gas concentrations increased significantly, reaching up to 120 times higher than the other two orientations. Moreover, the indoor space was filled with toxic gas substances more than twice in the same time due to the rapid increase of indoor concentration rate. In cases where the building's windows were positioned at the front, toxic gas stagnation occurred around the building due to pressure differences and reduced flow velocities. Based on our findings, the implementation of these guidelines will contribute to safeguarding residents by minimizing exposure to toxic gas during chemical accidents.

• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.166-173
• /
• 2024

Steroids have a temporary skin improvement and whitening effect by controlling vasodilation, but they also cause side effects when used for a long time. Therefore, steroids were designated and managed as raw materials that cannot be used in cosmetics in Korea. However, steroids are continuously being detected in cosmetics, causing social issues. In this study, we developed a certified reference material (CRM) for the determination of steroids such as hydrocortisone in cosmetics. A cream-type cosmetic CRM was manufactured and subsequently certified following the guidelines outlined in ISO Guide 35. Homogeneity, short-term stability, and long-term stability were evaluated using isotope dilution mass spectrometry (ID-MS). The certified values were determined by using NIST's primary reference material to ensure traceability. From now on, we intend to supply the certified reference material as a cosmetic CRM to national and international companies, as well as research institutes after certification as certified reference material from KOLAS and registering on COMAR.

• Journal of Life Science
• /
• v.34 no.4
• /
• pp.236-244
• /
• 2024

Melanin is a natural pigment found in most plants and animals, and it is involved in determining the color of the skin and hair. Melanogenesis is a reactive occurrence in melanocytes aiming to protect the skin from external stimuli, such as ultraviolet rays. Tyrosine is involved in the biosynthesis of the substrate tyrosine into melanin. However, melanin overproduction can lead to skin diseases, such as melasma, blotching, hyperpigmentation, and skin cancer. Although many studies have been conducted on whitening substances, such as kojic acid and arbutin, some countries have banned or refrained from using them due to their side effects. Therefore, this study assessed the potential of horseradish (HR) as a new whitening agent in cosmetic products. For efficient extraction, subcritical water extraction was conducted. The results showed that the horseradish subcritical water 200℃ (SW 200) extract showed high DPPH radical scavenging ability, total phenolic contents (TPC), inhibiting tyrosinase activity and inhibiting melanin production of B16-F10 melanoma cell lines. To investigate its cytotoxicity to the B16-F10 melanoma cell lines, MTT reduction assay and morphological changes were observed. No cytotoxicity was found in horseradish methanol extract and SW 200. In conclusion, this research suggests the possibility of horseradish subcritical water may be useful as a natural whitening ingredient to be used in cosmetic products.

• The Korea Journal of Herbology
• /
• v.39 no.3
• /
• pp.107-114
• /
• 2024

Objective : Cicadae Periostracum (CP), which is the discarded shell of the Cryptotympana atrata (Fabricius, 1775), is a recognized component of oriental medicine for treatment sore throat, itching, shock, sedation, edema. However, the safety and toxicity of CP have not yet been established. It has been reported that symptoms of addiction or side effects may occur in patients who take high doses of CP or who are hypersensitive to it. Therefore, we investigated the acute toxicity of an CP extracts in Sprague-Dawley (SD) rats. Methods : To study acute toxicity, five SD rats of each sex per group were treated with CP extracts at single doses of 0, 500, 1000, or 2000 mg/kg administrated by oral gavage, and body weight, clinical signs, and mortality were observed after dosing. At the end of 14-day observation period, all animals were sacrificed and complete hematological and macroscopic examinations were performed. Results : There were no dead animal and test article-related effects on body weight change or the gross finding. No toxicologically significant results were observed between control and treated groups in hematology. Although salivation related to stress at the highest dose was observed in clinical signs immediately after administration, it is considered to have no toxicological significance. Conclusion : As the results, we did not find any adverse effect at the dose levels of 500, 1000, or 2000 mg/kg in rats. The minimal lethal dose was considered to be over 2000 mg/kg body weight in rats.

• Information Systems Review
• /
• v.19 no.1
• /
• pp.147-168
• /
• 2017

We investigated perceptual similarity and the difference between client and vendor in information technology (IT) outsourcing projects. Specifically, we focused on each player's perception of how the fit of governance and peripheral knowledge affects the performance of IT project outsourcing. For 107 IT projects, we surveyed both client and vendor in the same IT projects and compared the responses of each side. Through a dyadic analysis, we first found that both client and vendor put more weight on the vendor's peripheral knowledge than that of the client as a positive influencer of project performance. However, regarding the governance style of an IT project, client and vendor showed completely different perspectives. The client believed that the vendor's peripheral knowledge positively contributes to the performance of IT project under the governance of outcome control. However, the vendor showed that its peripheral knowledge creates synergy effects under the governance of process control. Our interpretation of the perceptual similarity and difference between client and vendor delivers managerial implications for businesses that process IT projects.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.169-176
• /
• 2024

Purpose: In this paper, an experimental study was conducted to analyze the difference in shear strength caused by the problem of excluding coarse particles due to the size of the test specimen in the direct shear test. Method: A large-scale direct shear test was conducted on three weathered soils containing coarse aggregates with a maximum diameter of 50mm. In addition, a small-scale direct shear test was performed using a sample with a maximum diameter of 5 mm, excluding coarse aggregates. Result: In the case of the small-scale direct shear test, compared to the results of the large-scale direct shear test containing large particles, the internal friction angle was about 2.3% smaller, and there was no significant difference. In terms of cohesion, compared to the large-scale direct shear test, the small-scale direct shear test derived about 80.3% smaller value, showing a relatively large difference. Conclusion: In the large-scale direct shear test, it was analyzed that the coarse particles had a greater impact on the cohesion than the internal friction angle. Therefore, granite weathered clay containing coarse particles is judged to have the same shear strength as the cohesive force that is not affected by vertical stress. In this study, it was analyzed that the small-scale direct shear test, which excludes the coarse particles that are commonly used, provides results on the safety side by excluding the effect of coarse particles.