• Title/Summary/Keyword: side panel

Search Result 296, Processing Time 0.028 seconds

A Study on the Reduction of Over Head Crane′s Weight Considering Buckling, Vibration and Strength (좌굴, 진동, 강도를 고려한 천장크레인의 경량화에 관한 연구)

  • Hong, Do-Kwan;Ahn, Chan-Woo
    • Journal of Navigation and Port Research
    • /
    • v.26 no.3
    • /
    • pp.317-322
    • /
    • 2002
  • In this study, structural optimum design was applied to the girder of magnet over head crane. The optimization was carried out using ANSYS Code for the deadweight of girder, especially focused on the thickness of its upper, lower, side and reinforced plates. The weight could be reduced up to around 15% with constraints of its deformation, stress, natural frequency and buckling strength. The structural safety was also verified by the buckling analysis of its panel structure. It might be thought to be very useful to design the conventional structures for the weight save through the structural optimization. Also this paper grasped the sensitivity influenced the design variables upon the objective function and the state variables.

Implementation of Mobile Digital Signage System on the Moving Vehicle (차량 탑재형 모바일 디지털 사이니지 구현)

  • Kim, Hee Dong;Kim, Cha Sung
    • Journal of Information Technology Services
    • /
    • v.14 no.4
    • /
    • pp.257-267
    • /
    • 2015
  • We propose a vehicle-mounted, location-aware mobile digital signage system that can be used for public transportation through mobile communication. This paper proposes the installations of the LED display panels at the backside of the bus., which display traffic information to cars behind the bus. Information to be displayed would include, but is not limited to, road information, public commercials and private commercials. We propose the system architecture and further implement the prototype of mobile digital signage system for demonstration. The system is based on the Client-Server system. Each bus has a client terminal which detects the current location by a GPS receiver and sends its location information to the server using mobile communication function. The terminal device receives advertisements and traffic information from the server and displays it to the large LCD or LED panel installed at the inside and outside of the bus. We use the Android smartphone as a client system, which inherently equipped with GPS and mobile communication function. GPS detects the location of bus and reports its geo-location data to the traffic information center server via a wireless communication network. On the server side, we developed a specially designed control server, where it communicates with the other traffic information center and updates and manages the databases contents being displayed by each position. The server contains location dependent variable information and returns selected information back to the vehicle in real time. Spatial database is used to process location based data. Server system periodically receives the real time traffic information from the road information center database. And it process the information by bus location and bus line number. In this paper, we propose a mobile digital signage service and explain the system implementation of this service.

Comfort Evaluation of Posture Braces for Rounded Shoulders Using 2D and 3D Patterns (2D 및 3D 패턴 활용 둥근어깨 교정보조기 착용감 비교)

  • Oh, Miryung;Kim, Nam Yim;Park, Gin Ah
    • Journal of Fashion Business
    • /
    • v.25 no.3
    • /
    • pp.71-89
    • /
    • 2021
  • The purpose of this study was to design posture braces for rounded shoulders by examining characteristics of incorrect postures of rounded shoulders. The review of information in literature on rounded shoulder postures, correction exercise methods, and posture correction devices, has prompted this study to determine the design and material of a proper posture brace for rounded shoulders. In order to develop the pattern of a posture brace for rounded shoulders for women, the study carried out a comfort evaluation of the braces based on the 2D patterns through drafting method by utilizing the body measurements and relational formulae associated with the major body measurement such as bust circumference and on the 3D patterns of the brace which were obtained from 3D human model of women in their early 20s in Korea. Differences in angles were noted when 2D and 3D patterns of shoulder posture braces were compared. The side neck point was relocated farther outside in the 3D pattern to allow additional flexibility in the back-neck area, and the shoulder band was lowered by 14.8°, increasing armhole area comfort. The upper hemline of the front panel was found to rotate upward at an angle of 22.0° as the underarm point of the 3D pattern moved upwards than the underarm point of the 2D pattern, which enhanced comfort in the abdomen area. The 3D designs of shoulder posture brace was preferred in this study, as they significantly improved comfort while conducting fit evaluation compared to the 2D patterns of shoulder posture brace.

An extension of a high order approach for free vibration analysis of the nano-scale sandwich beam with steel skins for two types of soft and stiff cores

  • Marandi, S. Masoud;Dehkordi, Mohsen Botshekanan;Nourbakhsh, S. Hassan
    • Steel and Composite Structures
    • /
    • v.31 no.3
    • /
    • pp.261-276
    • /
    • 2019
  • The study investigates the free vibration of a nano-scale sandwich beam by an extended high order approach, which has not been reported in the existing literature. First-order shear deformation theory for steel skins and so-called high-order sandwich panel theory for the core are applied. Next, the modified couple stress theory is used for both skins and cores. The Hamilton principle is utilized for deriving equations and corresponding boundary conditions. First, in the study the three-mode shapes natural frequencies for various material parameters are investigated. Also, obtained results are evaluated for two types of stiff and soft cores and isotropic, homogenous steel skins. In the research since the governing equations and also the boundary conditions are nonhomogeneous, therefore some closed-form solutions are not applicable. So, to obtain natural frequencies, the boundary conditions are converted to initial conditions called the shooting method as the numerical one. This method is one of the most robust approaches to solve complex equations and boundary conditions. Moreover, three types of simply supported on both sides of the beam (S-S), simply on one side and clamp supported on the other one (S-C) and clamped supported on both sides (C-C) are scrutinized. The parametric study is followed to evaluate the effect of nano-size scale, geometrical configurations for skins, core and material property change for cores as well. Results show that natural frequencies increase by an increase in skins thickness and core Young modulus and a decrease in beam length, core thickness as well. Furthermore, differences between obtained frequencies for soft and stiff cores increase in higher mode shapes; while, the more differences are evaluated for the stiff one.

Differentiation among Conservative Voters, 2012-2017: Is the Uneven Playground Tilted to the Other Side (2012-2017년 보수 유권자의 분화: 과연 운동장은 (거꾸로) 기울었는가?)

  • Jang, Seung-Jin
    • Korean Journal of Legislative Studies
    • /
    • v.24 no.3
    • /
    • pp.29-54
    • /
    • 2018
  • Focusing on vastly different results between two presidential elections in 2012 and 2017, this paper examines how political attitudes of conservative voters had changed in 5 years and how these changes had brought about differences in their vote choices in 2017. Using panel data encompassing two presidential elections, this paper finds that, though ideological and affective evaluation of conservative parties and candidates had indeed deteriorated among supporters of Park Geun-Hye in 2012, it is candidate factors rather partisan ones that exerted much more significant influence on their vote choices in 2017. In addition it is found that the differentiation in political and economic policy preferences among conservative voters had only slight influence on their voted choices in 2017. This paper concludes with discussing how to understand the result of the $19^{th}$ presidential elections and what implications it has in prospecting the party realignment in Korean electoral politics.

Development of high-power haptic vibration actuator module and interface based on bidirectional electrostatic force driving structure (양방향 정전기력 구동 구조에 기반한 고출력 햅틱 진동 액추에이터 모듈 및 인터페이스 개발)

  • Kim, Jae-Ik;Lee, Jae-Kyung;Park, Young-Hwan;Seo, Jeong-Tae;Yang, Tae-Heon
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.1
    • /
    • pp.662-667
    • /
    • 2021
  • Vibrotactile feedback is a major function of the latest touch displays, which greatly improves the user's operability and immersion when interacting with the interface on the screen. In this study, we propose a vibrotactile actuator suitable for mounting on the back side of a mid- to large-sized display because it can generate a strong vibration output by applying an electrostatic force-based mechanism and can be manufactured in a thin flat panel type. The proposed actuator was developed in a structure capable of amplifying the vibration force by alternating up and down with electrostatic force by the upper and lower electrodes that are spaced apart from the electrically grounded mass suspended from a radial leaf spring. As a result of the performance evaluation, the developed bar-type module with two built-in actuators showed excellent vibration output of up to 3.3 g at 170 Hz, confirming the possibility of providing haptic feedback in medium and large touch displays.

A grid-line suppression technique based on the nonsubsampled contourlet transform in digital radiography

  • Namwoo Kim;Taeyoung Um;Hyun Tae Leem;Bon Tack Koo;Kyuseok Kim;Kyu Bom Kim
    • Nuclear Engineering and Technology
    • /
    • v.55 no.2
    • /
    • pp.655-668
    • /
    • 2023
  • In radiography, an antiscatter grid is a well-known device for eliminating unexpected x-ray scatter. We investigate a new stationary grid artifact suppression method based on a nonsubsampled contourlet transform (NSCT) incorporated with Gaussian band-pass filtering. The proposed method has an advantage that extracts the Moiré components while minimizing the loss of image information and apply the prior information of Moiré component positions in multi-decomposition sub-band images. We implemented the proposed algorithm and performed a simulation and an experiment to demonstrate its viability. We did this experiment using an x-ray tube (M-113T, Varian, focal spot size: 0.1 mm), a flat-panel detector (ROSE-M Sensor, Aspenstate, pixel dimension: 3032 × 3800 pixels, pixel size: 0.076 mm), and carbon graphite-interspaced grids (JPI Healthcare, 18 cm × 24 cm, line density: 103 LP/inch and 150 LP/inch, ratio: 5:1, focal distance: 65 cm). Our results indicate that the proposed method successfully suppressed grid artifacts by reducing them without either reducing the spatial resolution or causing negative side effects. Consequently, we anticipate that the proposed method can improve image acquisition in a stationary grid x-ray system as well as in extended x-ray imaging.

A Study on the Wooden Seated Vairocana Tri-kaya Buddha Images in the Daeungjeon Hall of Hwaeomsa Temple (화엄사 대웅전 목조비로자나삼신 불좌상에 대한 고찰)

  • Choe, Songeun
    • MISULJARYO - National Museum of Korea Art Journal
    • /
    • v.100
    • /
    • pp.140-170
    • /
    • 2021
  • This paper investigates the Wooden Seated Tri-kaya Buddha Images(三身佛像) of Vairocana, Rushana, and Sakyamuni enshrined in Daeungjeon Hall of Hwaeomsa temple(華嚴寺) in Gurae, South Cheolla Province. They were produced in 1634 CE and placed in 1635 CE, about forty years after original images made in the Goryeo period were destroyed by the Japanese army during the war. The reconstruction of Hwaeomsa was conducted by Gakseong, one of the leading monks of Joseon Dynasty in the 17th century, who also conducted the reconstructions of many Buddhist temples after the war. In 2015, a prayer text (dated 1635) concerning the production of Hwaeomsa Tri-kaya Buddha images was found in the repository within Sakyamuni Buddha. It lists the names of participants, including royal family members (i.e., prince Yi Guang, the eighth son of King Seon-jo), and their relatives (i.e., Sin Ik-seong, son-in-law of King Seonjo), court ladies, monk-sculptors, and large numbers of monks and laymen Buddhists. A prayer text (dated 1634) listing the names of monk-sculptors written on the wooden panel inside the pedestal of Rushana Buddha was also found. A recent investigation into the repository within Rushana Buddha in 2020 CE has revealed a prayer text listing participants producing these images, similar to the former one from Sakyamuni Buddha, together with sacred relics of hoo-ryeong-tong copper bottle and a large quantity of Sutra books. These new materials opened a way to understand Hwaeomsa Trikaya images, including who made them and when they were made. The two above-mentioned prayer texts from the repository of Sakyamuni and Rushana Buddha statues, and the wooden panel inside the pedestal of Rushan Buddha tell us that eighteen monk-sculptors, including Eungwon, Cheongheon and Ingyun, who were well-known monk artisans of the 17th century, took part in the construction of these images. As a matter of fact, Cheongheon belonged to a different workshop from Eungwon and Ingyun, who were most likely teacher and disciple or senior and junior colleagues, which means that the production of Hwaeomsa Tri-kaya Buddha images was a collaboration between sculptors from two workshops. Eungwon and Ingyun seem to have belonged to the same community studying under the great Buddhist priest Seonsu, the teacher of Monk Gakseong who was in charge of the reconstruction of Haweonsa temple. Hwaeomsa Tri-kaya Buddha images show a big head, a squarish face with plump cheeks, narrow and drooping shoulders, and a short waist, which depict significant differences in body proportion to those of other Buddha statues of the first half of 17th century, which typically have wide shoulders and long waists. The body proportion shown in the Hwaeomsa images could be linked with images of late Goryeo and early Joseon period. Rushana Buddha, raising his two arms in a preaching hand gesture and wearing a crown and bracelets, shows unique iconography of the Bodhisattva form. This iconography of Rushana Buddha had appeared in a few Sutra paintings of Northern Song and Late Goryeo period of 13th and 14th century. BodhaSri-mudra of Vairocana Buddha, unlike the general type of BodhaSri-mudra that shows the right hand holding the left index finger, places his right hand upon the left hand in a fist. It is similar to that of Vairocana images of Northern and Southern Song, whose left hand is placed on the top of right hand in a fist. This type of mudra was most likely introduced during the Goryeo period. The dried lacquer Seated Vairocana image of Bulheosa Temple in Naju is datable to late Goryeo period, and exhibits similar forms of the mudra. Hwaeomsa Tri-kaya Buddha images also show new iconographic aspects, as well as traditional stylistic and iconographic features. The earth-touching (bhumisparsa) mudra of Sakymuni Buddha, putting his left thumb close to the middle finger, as if to make a preaching mudra, can be regarded as a new aspect that was influenced by the Sutra illustrations of the Ming dynasty, which were imported by the royal court of Joseon dynasty and most likely had an impact on Joseon Buddhist art from the 15th and 16th centuries. Stylistic and iconographical features of Hwaeomsa Tri-kaya Buddha images indicate that the traditional aspects of Goryeo period and new iconography of Joseon period are rendered together, side by side, in these sculptures. The coexistence of old and new aspects in one set of images could indicate that monk sculptors tried to find a new way to produce Hwaeomsa images based on the old traditional style of Goryeo period when the original Tri-kaya Buddha images were made, although some new iconography popular in Joseon period was also employed in the images. It is also probable that monk sculptors of Hwaeomsa Tri-kaya Buddha images intended to reconstruct these images following the original images of Goryeo period, which was recollected by surviving monks at Hwaeomsa, who had witnessed the original Tri-kaya Buddha images.

Minimum Wage and Productivity: Analysis of Manufacturing Industry in Korea (최저임금과 생산성: 우리나라 제조업의 사례)

  • Kim, Kyoo Il;Ryuk, Seung Whan
    • Economic Analysis
    • /
    • v.26 no.1
    • /
    • pp.1-33
    • /
    • 2020
  • Recent discussions about a minimum wage increase (MWI) and its influence on the economy have mainly focused on the quantitative aspects, such as labor costs and employment. However, concerning the qualitative aspects, an MWI could have positive effects by enhancing firm productivity and crowding out marginal firms from the market. These positive effects of an MWI can offset, to some extent, its potential negative effects - increasing labor costs and decreasing employment, among others. In this regard we empirically examine the impact of an MWI on firm productivity (total factor productivity). Using firm level panel data from the manufacturing industry in Korea, we calculate the influence rates of a minimum wage by sector and by firm size (number of workers), and analyze its effects on firm productivity. In particular, the production functions of the firms are estimated by taking into account endogeneity among the input factors, in order to resolve the drawbacks of existing studies - underestimating the capital factor coefficient and overestimating the labor factor coefficient. This study finds that the influences of an MWI on wages, employment, and productivity are substantially different across sectors and firm sizes. While an MWI has shown to have positive influences on productivity growth in the manufacturing industry as a whole, each sector demonstrates a different direction of effect, and the degree of productivity change also varies by sector. The impacts of an MWI on firm productivity are generally estimated to be more negative for smaller firms, but in some sectors the effects are found to be positive. In addition, the wage increases resulting from an MWI seem to cause a productivity enhancement across all sectors in the manufacturing industry. The policy implications of this study are as follows. Considering the empirical findings that an MWI causes an increase in productivity in many sectors of the manufacturing industry, it would be desirable to take into consideration not only the negative side effects but also the positive effects of an MWI when designing any future minimum wage policy. Moreover, in spite of there being a uniform minimum wage, this study finds that the diverse influence rates of a minimum wage across firms have different impacts on wages, employment, and productivity across sectors or firm size. This finding could be conducive to discussions about differentiation among minimum wage schemes by sector or firm size.

Production Techniques for Goryeo Wooden Lacquerware (고려시대 목심칠기 木芯漆器의 제작기법 연구)

  • Yi, Yonghee;Park, Suzin;Yun, Eunyoung;Jung, Hyejin
    • Conservation Science in Museum
    • /
    • v.15
    • /
    • pp.78-95
    • /
    • 2014
  • To examine the materials, production techniques, and key features of Goryeo wooden lacquerwares, scientific analysis was conducted on six relevant lacquerware items. All of the items, except for a lacquered bowl duksu 4123, were found to have been made by first covering the surface of the wood with cloth and then varnishing with lacquer. The wooden frames of flower-shaped lacquered case and pine leaves shape lacquered case were made by wrapping thin wood around either the lid or bottom panel. In most cases, microscopic analysis revealed a lower layer of lacquer mixed with bone ash and bone dust, followed by an upper varnish layer of lacquer. SEM-EDS analysis and μ-XRF Micro-X-ray Fluorescence analysis showed that vermilion lacquer mixed with cinnabar was used on the surface. A lid decorated with a dot pattern was made by first varnishing the surface with yellow lacquer mixed with orpiment, and then irregular dot pattern with a mixture of black lacquer and soot. The vermilion lacquer used to varnish the side of the lacquered bowls was composed of lacquer mixed with cinnabar and minium Red Lead.