• Title/Summary/Keyword: side panel

Search Result 295, Processing Time 0.025 seconds

Image Contrast Enhancement Technique for Local Dimming Backlight of Small-sized Mobile Display (소형 모바일 디스플레이의 Local Dimming 백라이트를 위한 영상 컨트라스트 향상 기법)

  • Chung, Jin-Young;Yun, Ki-Bang;Kim, Ki-Doo
    • 전자공학회논문지 IE
    • /
    • v.46 no.4
    • /
    • pp.57-65
    • /
    • 2009
  • This paper presents the image contrast enhancement technique suitable for local dimming backlight of small-sized mobile display while achieving the reduction of the power consumption. In addition to the large-sized TFT-LCD, small-sized one has adopted LED for backlight. Since, conventionally, LED was mounted on the side edge of a display panel, global dimming method has been widely used. However, recently, new advanced method of local dimming by placing the LED to the backside of the display panel and it raised the necessity of sub-blocked processing after partitioning the target image. When the sub-blocked image has low brightness, the supply current of a backlight LED is reduced, which gives both enhancement of contrast ratio and power consumption reduction. In this paper, we propose simple and improved image enhancement algorithm suitable for the small-sized mobile display. After partitioning the input image by equal sized blocks and analyzing the pixel information in each block, we realize the primary contrast enhancement by independently processing the sub-blocks using the information such as histogram, mean, and standard deviation values of luminance(Y) component. And then resulting information is transferred to each backlight control unit for local dimming to realize the secondary contrast enhancement as well as reduction of power consumption.

Meat quality of pork loins from Hereford×Berkshire female and intact male pigs reared in an alternative production system

  • Robbins, Yvette;Park, Hyeon-Suk;Tennant, Travis;Hanson, Dana;Whitley, Niki;Min, Byungrok;Oh, Sang-Hyon
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.32 no.9
    • /
    • pp.1475-1481
    • /
    • 2019
  • Objective: The objective of the present study was to investigate pork quality from Hereford${\times}$Berkshire female and intact male pigs reared outdoors in an alternative production system. Methods: Berkshire purebred sows were artificially inseminated, once in the fall and again in the spring of the following year, with semen from Hereford boars and managed free of antibiotics in an outdoor hoop structure until the last month of pregnancy, after which they were moved to a pasture-based unit of 0.8 hectares with individual lots with a farrowing hut, shade, and water ad libitum. Piglets were weaned at 4 weeks of age and housed in a deep-bedded hoop structure, grouped by sex. Animals were harvested at market weight of 125 kg, approximately 200 days of age. Hot carcass weight was collected at the time of the harvest. After 24 hours of refrigeration, carcass characteristics were measured. Longissimus dorsi samples collected from the right side loin. Loins were cut into 2.54-cm thick chops and were used to measure marbling score, color score, drip loss, and ultimate pH. Sensory panel tests were conducted as well at North Carolina State University. For pork characteristics and sensory panel data, trial and sex were included in the statistical model as fixed effects. Hot carcass weight was included in the model as a covariate for backfat thickness. Results: Neither the subjective nor the objective color scores displayed any differences between the boars and the gilts. No difference was found for pH and marbling score between trials or sexes. Gilts had a thicker backfat measurement at the last lumbar and a narrower longissimus muscle area measurement when compared to the boars. The only difference in the sensory characteristics was found between the trials for texture and moisture scores. Conclusion: Consumers were not able to detect boar taint under the condition of this study, which is that the intact males were reared outdoors. Additional trials would be necessary; however, based on the results of the present study, outdoor rearing can be suggested as a solution to the issue of boar taint.

Facial Paralysis and Myositis Following the H3N2 Influenza Vaccine in a Dog

  • Ju-Hyun An;Ye-In Oh;So-Hee Kim;Su-Min Park;Jeong-Hwa Lee;Ga-Hyun Lim;Kyung-Won Seo;Hwa-Young Youn
    • Journal of Veterinary Clinics
    • /
    • v.40 no.5
    • /
    • pp.336-340
    • /
    • 2023
  • A dog (2-year old, female, Shih-Tzu) presented with hyperthermia and right-sided facial paralysis characterized by the inability to close the right eye and drooling from the right side of the mouth after H3N2 influenza vaccination [A/Canine/Korea/01/07(H3N2) strain; Caniflu-Max, Bionote, Hwaseong, Gyeonggi-do, ROK]. To determine the cause of the fever and neurological symptoms, physical examination, ophthalmic examination, thoracic and abdominal radiography, abdominal ultrasonography, complete blood counts, serum chemistry values, and electrolyte levels were determined. In addition, Cerebrospinal fluid analysis, antinuclear antibody test, fever of unknown origin polymerase chain reaction (PCR) panel, tick-borne pathogen PCR panel were performed. As a result, hyperthermia, leukocytosis, and elevated C-reactive protein were confirmed. In addition, neurological examination revealed decreased right eyelid reflexes, corneal reflexes, threat response, and facial sensation, it was possible to suspect problems with the trigeminal and facial nerves of the cranial nerve. Magnetic resonance imaging revealed a lesion suggestive of myositis in the right muscular lesion at atlanto-occipital junction level on site of vaccine injection. Therefore, right-sided facial paralysis was tentatively determined to be a secondary cause of nerve damage caused by myositis. The patient was treated with immunosuppressants such as prednisolone and mycophenolate mofetil. After 3 months of immunosuppressant therapy, the patient's symptoms improved.

Effect of Deboning Time on Quality Characteristics of Pressed Pork Ham (돈육 뒷다리 부위의 발골시간이 프레스햄의 품질 특성에 미치는 영향)

  • Yang, H.S.;Joo, S.T.;Park, Gu-Boo
    • Journal of Animal Science and Technology
    • /
    • v.49 no.3
    • /
    • pp.387-394
    • /
    • 2007
  • To investigate the effects of deboning time and muscle type of ham on quality characteristics of cooked press ham, a total of twelve pigs(barrow, 100±5kg) were slaughtered and split in half. The left side ham of carcasses was deboned immediately after slaughter whereas the right side ham was deboned after chilling for 24 hours at 4℃. Each of two muscles(SM; Semimembranosus, BF; Biceps femoris) was used to make a press ham. The pH of hot-boning muscles was significantly(p<0.05) higher than that of cold- boning muscles, and the pH of SM samples was significantly(p<0.05) higher than BF samples. Hot-boning muscles showed significantly(p<0.05) longer sarcomere length compared with cold-boning muscles. There was no significant difference in myoglobin(Mb) percentage between SM and BF muscles, but SM samples of hot-boning showed significantly(p<0.05) lower L* value compared to hot-boning BF samples. The lightness(L*) of hot-boning muscles was significantly(p<0.05) lower than that of cold-boning muscles. These results suggested that the dark color of hot-boning samples might be due to not only the high muscle pH but also the long sarcomere length without difference in Mb percentage. Hardness and gumminess of hot-boning press ham were significantly(p<0.05) lower than those of cold-boning samples. These results implied that color and pH of press ham did not affected by deboning time or muscle type of ham. However data suggested that texture and panel test of press ham might be improved by using hot-boned muscle due to long sarcomere length of raw meat.

Model Test on the Opening Efficiency of the Midwater Pair Trawl Net (쌍끌이 중층망의 전개성능에 대한 모형실험)

  • 김정문;김진건
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.36 no.2
    • /
    • pp.73-88
    • /
    • 2000
  • A series of analysis and experiment on the fishing gear and method of the existing midwater pair trawl net with 12,800mm of maximum mesh size is carried out to determine the most effective shape factor. As the first step of this study, the fishing gear and method for the existing net are analyzed to solve problems, such as being low of the net height by increasing the towing speed, twist of net pendant and twine, suspension of float between knots of mesh. etc. Standing on these results, the existing net are modified by very effective shape based on the theory and technology designing the fishing gear. Also, the model experiment is carried out to determine the most effective shape factor of the modified net in the circulation water channel. The obtained results can be summarized as follows : 1. On the length of net pendants(No.2 and No.3) connected with side line, opening efficiency of net with length 8.0cm of net pendant is the greatest and in the order of 11.5cm, 15.0cm. 2. On the number of the net pendant, opening efficiency of net with 4 lines of net pendant is the greatest and in the order of 3 lines, 2 lines. Center part of side panel is pushed out backward, and the pushed length is increasing by increasing flow speed. 3. On the sinking force, opening efficiency of the net is increasing by increasing sinking force. And opening efficiency shows almost the same when sinking force is greater about 1.5 times than that of the existing net in case of the net with 3 lines of net pendant, and about 1.6 ~ 1.7 times than that of the existing net in case of the net with 2 lines.

  • PDF

Shape of the model pound net affected by wave and fish behavior to the net - Shape and tension of the model pound net affected by wave - (파동에 의한 모형정치망의 형상변화와 어류대망행동 - 파동에 의한 모형정치망의 형상과 장력변화 -)

  • Lee, Ju-Hee;Kwon, Byeong-Guk;Yun, Il-Bu;Kim, Sam-Kon;Yoo, Je-Bum;Kim, Boo-Young;Kim, Byung-Soo;Lee, Hye-Ok
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.43 no.2
    • /
    • pp.101-115
    • /
    • 2007
  • The pound net fishery is very important one in Korean coastal fishery and it need to grasp the characteristics of the net affected by many factors. It is considered that the structure and the shape of the pound net can be changed by the direction and speed of current, wave height, depth and conditions of sea bed. However, most of all, the speed of current and wave height influence more upon the pound net than any other factors to deform and flutter. In this study, author carried out the experiments with a model of double one-side pound net made by the similarity law as 1:100 scales at a real experimental area, and additionally the model net experiments were conducted in the circulating water channel in Pukyong National University. The author analyzed the data of transformation of shape and tension of the model pound net to recognize the characteristics of the current and wave acting on it. Regardless of the direction of flow affecting on the fish court net or bag net, the deformed angle and depth to the side panel and bottom of box nets becomes bigger as the wave gets higher and the period of wave is faster. The tension in both upward or downward tends to be changed by the speed of wave. Those value of changes occurred similarly in either fish court net or bag net. Generally, when bag net is located at upward of flow, the value of tension was bigger 10% than any other location or nets. Regardless of the setting direction, the tension of the pound net is increased in proportion to flow speed, wave height and period of wave, and it becomes bigger about 15-30% at upward to flow than downward. Where the flow is upward in the court net, the tension in the wave increased to 37% compared to the one in the flow only in the condition of flow of 0.1-0.3m/s. Where the flow is upward in the bag net, the tension in the wave increased to 52% in the flow of 0.1m/s, and the tension increased to 48% in the flow of 0.2-0.3m/s.

Optimal Design Method of 1-Port Surge Protective Device Based on Zinc Oxide Varistor (선화아연바리스터 기반의 1-포트 서지보호장치의 최적 설계 기법)

  • Jeong, Tae-Hoon;Kim, Young-Sung;Park, Geun-Bo;Lee, Seung-IL
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.4
    • /
    • pp.93-102
    • /
    • 2018
  • This paper reports a Surge Protective Device (SPD) that is used to protect an automatic metering interface (AMI) power supplies of communication equipment on a low-voltage distribution system from a lightning current. The surge protective device (SPD) can be classified as one-port SPDs and two-port SPDs with decoupling elements depending on the connection type. The protection of internal systems against the lightning current may require a systematic approach consisting of coordinated SPDs. To deal with this, the definition of a lightning protection zone (LPZ) was studied and interpreted through a theoretical review. Because the lightning current resulting from a lightning surge is considerably high, there is limited protection from one SPD; therefore, coordinated cascaded MOV-based SPDs are installed to solve this problem. Regarding the power grid mentioned in this paper, a class II SPD for the low-voltage distribution system installed on the border of LPZ1 and LPZ2, which establish a protection coordination with the Arrester (LA, SA) that corresponds to the LPZO installed on the MOF stage connected to one system were designed to protect various communication (control) equipment, including the automatic meter reading system inside the branch-type electric supply panel of a building, not the incoming side of one system. In addition, performance-related tests were done by a comparison with the existing method through testing, and the optimal design was achieved for the 1-port SPD that uses a series connection and can bleed load current without any decoupling element.

A Countermeasure of New Protectionism by Green Growth in Korea (녹색성장과 보호무역주의에 따른 대응 방안)

  • Lee, Woo-Chae;Yoon, Young-Han
    • International Commerce and Information Review
    • /
    • v.11 no.4
    • /
    • pp.395-418
    • /
    • 2009
  • Appeared in the 1970s he started the global warming problem of carbon reduction, unlike the expected withdrawal of the United States was anticipated to be nominal stripping. However, EU mainly carbon market, buy and sell rights to be disposed of evolution was born. In fact, the current reduction of the Kyoto Protocol, and Korea will be designated as the bureau had been scheduled. However, due to economic recession in Korea's status as exempt countries have enjoyed a considerable period. Global warming is a problem in earnest, however, the United States to participate in one or more such discussions since 2013, clearly this will begin the international order. And international order that is more stringent than expected, and is expected to be strong. Then, however, an interesting thing to justify protection of the environment in some countries to protect domestic industry, the movement is visible is the side. In fact the WTO since the conclusion of all non-tariff trade barriers were abolished. However, recently, New Round of the delay based on reciprocity and fair trade in the framework of environmental protection to justify the movement to protect the domestic industry has been captured. These trends are not friendly, never in Korea. The rationale is that these regulations are enforced, many of our countries and countries with significant trade transactions and the enforcement points. And South Korea's automotive, semiconductors, ships, etc. The main products are much discussed in the international regulations are being referred to as the target point is due. Korean government to actively participate in the international situation and efforts to explore new markets, said yesterday, and 'Low Carbon, Green Growth' was declared. And the Intergovernmental Panel on Climate Change(IPCC) recommendations of the best 30% reduction target was present. This is nothing different about this objection is true. A more fundamental solution to faithfully perform the reduction targets, while the development of environmentally friendly products and the incidence of international standards through the development and expansion of new growth engines, Indeed we are expected to be a fundamental methodology.

  • PDF

Research about muscle ache curer design development for hospital (병원용 근육통증 치료기 디자인 개발에 관한 연구)

  • Oh, Sung-Jin
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2006.11a
    • /
    • pp.856-859
    • /
    • 2006
  • Patient's position who muscle ache curer for hospital undergoes person entrance and treatment that take advantage of biological, physical force of low frequency and it is equipment that treat body muscle ache, but use equipment when use patient into compensation in hospital specially, that consider everybody is important first of all. This research question investigation with market survey of old product enforce because preference degree reflected officer a result and apply opinion tuned with product development connection engineers on DESIGN direction via typical product design development process close. This curer development research analyzed data involved directly taking advantage of FGI techniques with literature investigation collection. Investigation examined laying stress on muscle ache curer for hospital and a nurse than a doctor answered on question and purchase selection criterion or price portion to user focus. Direct market survey research that see item indicated by competition four provision shortcomings consequently in NEW MODEL development hereafter supplement and expectation. by contributing greatly in M/S security strategy hereafter because design development consisted for side that improve.

  • PDF

A Study on Application of Corrugated Invar Strake Edge in the Membrane Cargo Containment of LNG Carriers (LNG선 화물격납용기 Invar strake edge 이음부 형상 개선에 관한 연구)

  • Han, Jong-Man
    • Journal of Welding and Joining
    • /
    • v.27 no.5
    • /
    • pp.74-80
    • /
    • 2009
  • The membrane of the LNG carriers consists of thin strips of INVAR(Fe-36%Ni) steel plates, and the junction between INVAR strips is fabricated by welding. Thousands of the raised edge joints, regularly spaced, are located around all the side of the tank corner near the transverse bulkhead, and TIG welding is manually made on the top of the raised edges. Since the thickness of all the laminated edge plies is extremely thin and the weld position is under a bad accessibility, highly skilled workers are required to perform welding relatively for a long welding time. An alternative scheme for the corner membrane fabrication is proposed in the study to improve the installation workability and thus productivity. The scheme replaces the welded edges with the preformed corrugation ones. A panel strip with regularly-spaced corrugations is installed at the corner instead of the individual flat strip of which edge is vertically raised to be welded with the adjacent strip. In the study, a series of the evaluation on the corrugated edge members was performed to assess the applicability to the real LNG carrier fabrication. Opening displacement at the raised edge was experimentally examined. Elastic stiffness regressed from the displacement was nearly same in both edge types. Edge displacement and local stresses were calculated under hydrostatic pressure and temperature change due to liquefied cargo. Fatigue test was performed on both corrugated and welded edge specimens consisting of two or five plies of invar strips. Fatigue strength of the corrugated specimens was not less than that of the welded specimens.