• 전자공학회논문지 IE
• /
• 제47권2호
• /
• pp.47-53
• /
• 2010

본 논문은 PLC를 이용하여 자동으로 제어되는 쇼트볼 이송 호이스트에 대해 연구하였다. 대형 선박 표면에 페인트를 다시 칠할 때 기존의 페인트를 제거하는데 이때 찌꺼기들을 완전히 제거하기 위해서 사용하는 것이 쇼트볼이다. 고철에서 쇳물을 만들고 냉각 시켜서 작은 쇼트볼을 만든 후 호이스트와 연결 된 전자석을 이용하여 호퍼로 이동하게 된다. 현재 쇼트 볼을 호퍼에 옮기는 과정을 살펴보면 조작기를 사용하여 사람이 수동으로 호이스트를 조작하고 있어서 쇼트볼을 이동하는데 비효율적이며 기기를 작동하는데 대충 감으로 작업을 하고 있다. 그래서 수동으로 조작되고 있는 호이스트를 정확하게 위치제어를 하고 효율적인 작업을 할 수 있도록 무인 자동화 장치를 개발하였다.

• 소성∙가공
• /
• 제18권2호
• /
• pp.160-165
• /
• 2009

A Study on Effects of the Runner and the Gate of double shot injection molded Parts using CAE Double shot injection molding can inject two different materials or two different colors in the same mold in a injection molding process. Double shot injection molded parts can be characterized that the base part maintains strength and specified part can inject soft-material. It can reduce the production cost by single automatic operations. In this paper, we designed double shot injection mold for automobile emote control To inject secondary part, this part is used as an insert after external appearance of product is injected. CAE analysis was progressed gate location and runner size as variables. The analysis result is reflected in mold design process. As a result, it could solve problems which are generated in the conventional mold. Additionally, cost can be downed by reducing runner weight. As well as it could omit painting process because the surface of finished product is improved through new mold.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.642-653
• /
• 2008

In this paper, we propose a 3-D finite element (FE) analysis model with combined physical behavior and kinematical impact factors for evaluation of residual stress in multi-impact shot peening. The FE model considers both physical behavior of material and characteristics of kinematical impact. The physical parameters include elastic-plastic FE modeling of shot ball, material damping coefficient, dynamic friction coefficient. The kinematical parameters include impact velocity and diameter of shot ball. Multi-impact FE model consists of 3-D symmetry-cell. We can describe a certain repeated area of peened specimen under equibiaxial residual stress by the cell. With the cell model, we investigate the FE peening coverage, dependency on the impact sequence, effect of repeated cycle. The proposed FE model provides converged and unique solution of surface stress, maximum compressive residual stress and deformation depth at four impact positions. Further, in contrast to the rigid and elastic shots, plastically deformable shot produces residual stresses closer to experimental solutions by X-ray diffraction. Consequently, it is confirmed that the FE model with peening factors and plastic shot is valid for multi-shot peening analyses.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.145-148
• /
• 2007

논문은 비디오 픽쳐 타입을 이용한 비디오 셧 검출에 관한 연구이다. 제안한 방법은 압축된 비디오 프레임에 대하여 원 영상을 복원하지 않고, 압축 상태의 비디오 프레임을 이용한다. I픽쳐 프레임에서 DC영상을 복원하고, P픽쳐 프레임에서는 매크로블록의 개수를 이용하여 비디오 셧을 검출 한다. 테스트 비디오를 이용하여 실험 결과 $85\sim98%$의 장면전환 검출이 가능 하였고, 압축비트스트림을 복원하여 장면전환의 셧을 검출 하는 기법에 비해 4배 빠른 검색이 가능하다.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.930-937
• /
• 2005

One of the useful technology for light-weightening of components required in the automobile and machine industry is to use of high strength materials. To improve material properties, carbonizing treatment, nitrifying treatment, and shot-peening method are representatively applied, However, the shot-peening method is generally used to remove the surface defect of steel and to improve the fatigue strength on surface. Benefits by shot peening are to make increase resistance against fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this paper, investigated the effect of shot peening on the corrosion of SUP-9 steel immersed in $3.5\%$ NaCl solution and corrosion characteristics by the heat treatment during shot peening process. The immersion test was performed on the four kinds of specimens. Corrosion potential, polarization curve, residual stress and etc. were investigated from the experimental results.

• 융합신호처리학회논문지
• /
• 제2권1호
• /
• pp.38-43
• /
• 2001

본 논문에서는 MPEG 비디오 스트림을 분석하여 DCT DC 계수를 추출하고 이들로 구성된 DC 이미지로부터 제안하는 robust feature를 이용하여 shot 검출을 수행한 후 각 feature들의 통계적 특성을 이용하여 스트림의 특징에 따라 weight를 부가하여 구해진 characterizing value의 시간 변화량을 구한다. 추해진 변화량의 local maxima와 local minima는 비디오 스트림에서 각각 가장 특징적인 frame과 평균적인 frame을 나타낸다. 이 순간의 shot을 구함으로서 효과적이고 빠른 시간 내에 key frame을 추출한다. 추출되어진 key frame에 대하여 원영상을 복원한 후, 색인을 위하여 다수의 parameter를 구하고, 사용자가 질의한 영상에 대해서 이들 파라메터를 구하여 key frame들과 가장 유사한 대표영상들을 검색한다. 실험결과 일반적인 방법보다 더 나은 결과를 보였고, 높은 검색율을 보였다.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5902-5909
• /
• 2011

본 논문에서는 비디오 데이터에서 확신도 추론을 이용하여 급진적인 화면변환과 점진적인 화면변환을 동시에 검출하는 새로운 방법을 제안한다. 제안된 방법에서 급진적인 화면변환은 컷을 의미하고, 점진적인 화면변환은 페이드 인, 페이드 아웃, 디졸브, 수평 와이프, 수직 와이프, 반도어(Barn Doors), 아이리스 라운드(Iris Round)를 의미한다. 먼저, 각 화면변환을 대표하는 특징을 추출한 후 확신도를 이용하여 특징들을 효과적으로 통합하면서 발생한 화면변환을 추출한다. 실험결과에서는 제안된 방법이 기존의 방법에 비해 여러 가지 종류의 화면변환을 보다 정확하게 추출함을 다양한 비디오 데이터를 이용한 실험을 통해 보여준다.

• 한국주조공학회지
• /
• 제35권4호
• /
• pp.80-87
• /
• 2015

The Al die casting process has been widely used in the manufacturing of automotive parts when the process requires near-net shape casting and a high productive rate. However, porosity arises in the casting process, and this hampers the wider use of this method for the creation of high-durability automotive components. The porosity can be controlled by the shot condition, but, it is critical to set the shot condition in the sleeve, and it remains difficult to optimize the shot condition to avoid air entrapment efficiently. In this study, the 4.5 mm, 2.0 mm plate die castings were fabricated under various shot conditions, such as plunger velocities of 0.7 m/s ~ 3.0 m/s and fast shot set points of the cavity of -25%, 0%, 25%, and 50%. The mold filling behavior of Al melts in the cavity was analyzed by a numerical method. Also, according to the shot conditions, the results of numerical analyses were compared to those of die-casting experiments. The porosity levels of the plate castings were analyzed by X-ray CT images and by density and microstructural analyses. The effects of the porosity on the mechanical properties were analyzed by tensile tests and hardness tests. The simulation results are in good general agreements with the die-casting experimental results. When plunger velocity and fast shot set point are 1.0 m/s and cavity 25% position, castings had optimum condition for good mechanical properties and a low level of porosity.

• 한국지능시스템학회논문지
• /
• 제11권6호
• /
• pp.465-469
• /
• 2001

In injection molding short shot is one of the frequent and fatal defects. Experts of Injection molding usually adjust process conditions such as injection time, mold temperature, and melt temperature because it is most economic way in time and cost. However, it is difficult task to find appropriate process conditions for troubleshooting of short shot as injection molding process is a highly nonlinear system and process conditions are coupled. In this paper, a modular fuzzy neural network (MFNN) has been applied to injection molding process to shorten troubleshooting time of short shot. Based on melt temperature and fill time, a reasonable initial mo이 temperature is recommenced by the NFNN, and then the mold temperature is inputted to injection molding process. Depending on injection molding result, specifically the insufficient quantity of an injection molded part. and appropriate mold temperature is recommend repeatedly through the NFNN.

• 소성∙가공
• /
• 제21권3호
• /
• pp.172-178
• /
• 2012

We performed a shot peening test and used a 2-D finite element model which predicts the compressive residual stress distribution below the material's surface. In this study, the concept of 'impact cycle' is introduced to account for the irregularity in the shot's impact position during testing. The impact cycle was imbedded in the finite element model. In the shot peening test, shot bombarded a type-A Almen strip surface with different impact velocities. To verify the proposed finite element model, we compared the deformed cross sectional shape of the Almen strips with the shapes computed by the proposed finite element model. Good agreement was noted between measurements and the finite element model predictions. With the verified finite element model, a series of finite element simulations was conducted to compute the residual stress distribution below the material's surface and the characteristics of these distributions are discussed.