• 실천공학교육논문지
• /
• 제7권1호
• /
• pp.25-30
• /
• 2015

가상현실은 프로그래밍, 시뮬레이션, 컴퓨터 그래픽스 등 다양한 학문의 종합체이며 이러한 형태의 새로운 문화적 패러다임의 등장은 우리에게 새로운 개념의 콘텐츠 개발 방법과 정보교류방식을 요구하고 있다. 본 연구에서는 3D 가상현실 기술을 이용하여 I-Bench Mobile 이라는 새로운 장비를 통해 사용자와 인터렉티브가 가능한 가구배치 시뮬레이션을 제안한다. 이것은 3D로 제작이 되며 물리 및 중력을 적용한다는 점에 강점을 두며, 또한 스냅샷 기능을 통해 고객들이 가구를 자신이 원하는 장소에 배치하여 궁극적으로 고객 만족도 향상을 목표로 하고 있다. 가상증강현실기술을 이용한 소프트웨어를 개발하는 본 연구 과정은 공학계열의 컴퓨터학과와 예술계열의 영상 예술 디자인학과, 시각 디자인 학과와 같은 다양한 학과들에서 다루는 교육과정의 작업이 필요하므로 단지 코딩 기술이 아닌 여러 학문의 기술들이 함께 어우러진 융합 IT기술 교육의 좋은 사례라고 할 수 있다.

• 한국콘텐츠학회논문지
• /
• 제17권4호
• /
• pp.119-131
• /
• 2017

최근 문화재청에서 시행하는 문화재 활용사업은 예산편성이나 사업에 참여하는 이해관계자들의 적정대가기준을 지급할 수 있는 기준체계가 마련되지 못한 채로 운영되고 있다. 이로 인하여 사업을 주관하는 문화재청과 수행하는 지자체 또는 민간단체 간의 예산편성 집행 정산 과정에 마찰이 빈번하게 발생하고 있는 실정이다. 특히, 사업의 기획부터 종료까지 예산편성 항목이나 세부기준 등이 불명확하여 사업을 안정적으로 운영하기 어려운 상황이며, 결과적으로는 사업이 지속적으로 발전하지 못하고 단순히 일회성에 그치는 경우로 이어지고 있다. 이에 본 연구는 문화재 활용사업의 발전 및 안정적인 운영을 위해서 현재 문화재 활용사업의 전반적인 운영현황 및 체계와 문제점을 파악하고, 타 분야 또는 유사분야에서 활용하고 있는 예산편성 항목 및 세부기준을 벤치마킹, 그리고 실제 수행한 사례를 분석 종합하여 합리적인 수준의 예산편성 기준체계를 제안하였다.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.827-834
• /
• 2020

Damage of tungsten due to helium ions of a PF device was studied. The tungsten was analyzed by SEM and AFM after irradiation. SEM revealed fine bubbles of helium atoms with diameters of a few nanometers, which join and form larger bubbles and blisters on the surface of tungsten. This observation confirmed the results of molecular dynamics simulation. SEM analysis after etching of the irradiated surface indicated cavities with depth range of 35-85 nm. The average fluence of helium ion of the PF device was calculated about 5.2 × 10¹⁵ cm^-2 per shot, using Lee code. Energy spectrum of helium ions was estimated using a Thomson parabola spectrometer as a function of dN/dE ∝ E^-2.8 in the energy range of 10-200 keV. The characteristics of helium ion beam was imported to SRIM code. SRIM revealed that the maximum DPA and maximum helium concentration occur in the depth range of 20-50 nm. SRIM also showed that at depth of 30 nm, all of the tungsten atoms are displaced after 20 shots, while at depth of higher than 85 nm the destruction is insignificant. There is a close match between SRIM results and the measured depths of cavities in SEM images of tungsten after etching.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.659-664
• /
• 2009

This paper describes lightning impulse operating duty performance and temperature dependence of series gap type for transmission line arresters. The ageing parameters of lightning arresters are impulse current, moisture ingress, temperature ageing and so on. Especially it is important to estimate the change of electrical characteristics by lightning impulse current. In the discharge withstand test, total energy applied to the ZnO arrester each time is 4/10 ${\mu}s$, 30 kA. and in the operating duty test, the arrester has passed the test if thermal stability is achieved, if the residual voltage measured before and after the test is not changed by more than 5 %, and after the test reveals no evidence of puncture, flashover or cracking of the ZnO block. As a results, the residual voltage was in the range of 17.2${\sim}$20.3 kV and ZnO block bear up against at 2 shot of series impulse current of 30 kA. Also it was so excellent that the mechanical destruction does not occur at the 2 groups of 5 impulses current of 2/20 ${\mu}s$ 10 kA. According to the tests, it is thought that the ZnO arrester shows good stability with impulse current test. and it was found that the ambient temperature is increased resistive leakage current was increased in the range 47.3${\sim}$167.4 ${\mu}A$.

• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.600-609
• /
• 2017

탐색기의 센서 영상을 이용하여 최종 표적에 대한 선정을 수동 또는 자동으로 할 수 있는 표적 관리 모의 시스템을 개발하였다. 모의 시스템은 비행체 시스템과 지상 시스템으로 구성하였다. 비행체 시스템은 비행체의 운동역학과 센서 영상을 모의하고 지상 시스템은 표적 템플릿 모의와 지상 제어기를 모의를 수행한다. 비행체의 운동역학은 의사 6자유도를 기반으로 비례항법유도기법을 사용한다. 탐색기의 센서 영상은 알려진 적외선 영상 렌더링 기법을 이용하여 직접 개발하였으며 상용 프로그램과 비교하여 검증하였다. 지상제어기는 사용자 편의를 위해 임무에 관련된 정보를 가능한 많이 전시할 수 있는 사용자 인터페이스로 구성하였다. 최종적으로 표적 격추 임무 모의를 통해 요구하는 성능에 만족함을 확인하였다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• 한국주조공학회지
• /
• 제26권5호
• /
• pp.222-226
• /
• 2006

Steel making slag has gained a considerable attraction as one candidate of eco-materials in research fields for recycling resources. Thus, many researches have been performed but were limited to development of substitute for cement being used in the construction field. A little research work also has been done on development of higher value-added materials, including heat resistant and sound absorbing materials. For this reason, the present study were focused on macrostructure characterization of fabricated slag fibers which are applicable to heat resistant materials. The slag fibers were fabricated through a modified melt extraction method. The processing variables employed were the wheel speed and molten slag temperature. The synthesized fibers were characterized by optical microscope and scanning electron microscopy. It was found that the wheel speed of 1400 rpm generated better quality of mineral fibers in terms of the relative amount of shot, diameter and length. This was attributed to the relative extent of contact width between the flowing melt and the rotating wheel. The thickness of the slag fibers also were decreased with increasing the slag melt temperature due mainly to significant decrease in the viscosity of the slag melt. In addition, the lower melt temperature caused an increase in number of shots plus the mineral fibers.

• 비파괴검사학회지
• /
• 제35권5호
• /
• pp.299-306
• /
• 2015

일반 위상배열 시스템에서는 다수의 압전소자를 가지는 탐촉자의 개별 소자에 인가하는 시간지연을 조절함으로써 초음파빔을 전자적으로 제어하고 초음파 영상을 획득한다. 반면, full matrix capture(FMC) 기술은 위상배열 탐촉자에 대해 하나의 소자에서 초음파를 입사시킨 신호를 모든 압전소자에서 수신하고, 이 방법으로 모든 가능한 송수신 조합의 신호 데이터를 수집하는 방법이다. 이 FMC 데이터는 후처리를 통해 초음파 영상으로 재구성될 수 있으며, 기존 위상배열 초음파 영상과 동등한 영상뿐만 아니라 가상적으로 관심영역의 모든 지점에 집속하여 분해능과 선명도가 향상된 total focusing method(TFM) 영상으로도 합성이 가능하다. 본 논문에서는 일반 위상배열장치를 이용하여 FMC가 가능하도록 시스템을 구현하고, 취득된 FMC 신호로부터 sector B-scan 및 TFM 이미지를 영상화하는 알고리즘에 대한 연구를 수행하였다.