• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.45-52
• /
• 2004

According tothe development of digital media technologies various algorithms for video sequence matching have been proposed to match the video sequences efficiently. A large number of video sequence matching methods have focused on frame-wise query, whereas a relatively few algorithms have been presented for video sequence matching or video shot matching. In this paper, we propose an efficientalgorithm to index the video sequences and to retrieve the sequences for video sequence query. To improve the accuracy and performance of video sequence matching, we employ the Cauchy function as a similarity measure between histograms of consecutive frames, which yields a high performance compared with conventional measures. The key frames extracted from segmented video shots can be used not only for video shot clustering but also for video sequence matching or browsing, where the key frame is defined by the frame that is significantly different from the previous fames. Several key frame extraction algorithms have been proposed, in which similar methods used for shot boundary detection were employed with proper similarity measures. In this paper, we propose the efficient algorithm to extract key frames using the cumulative Cauchy function measure and. compare its performance with that of conventional algorithms. Video sequence matching can be performed by evaluating the similarity between data sets of key frames. To improve the matching efficiency with the set of extracted key frames we employ the Cauchy function and the modified Hausdorff distance. Experimental results with several color video sequences show that the proposed method yields the high matching performance and accuracy with a low computational load compared with conventional algorithms.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.60-67
• /
• 2003

The perceptual change and reproduction process of a space is distinguished from the difference between the Modem Times and the digitalized Post-modem Times. According to this changing aspect, the dwelling. concept is also progressed toward the escapeness from the regularly standardized settlement. But, as written above, the escapable dwelling behavior pattern is re-territorizated through new restriction and domination system. Among the newly re-territorized dwelling areas, the virtual space that included human being's equal in the contemporary meaning has already been on the surface in our daily life, it has been enlarging into all kinds of activity. The virtual space has the possibility to extend beyond a already well-used to physical space and time unlimitedly. But, owing to the ambiguous boundary between the real space and the virtual space, it is getting more important to define the spatial substance in the Digital Age. From now on, especially, the academical fields like a Architecture and a Interior Design that dealed with a living space have to give it a great shot. What I really want to say is that various approach about the space itself with the help of many sorts of so-called a Case Study could be a diversity & uniqueness out of a typical point of view about the study handling on space and time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.775-792
• /
• 2015

Person re-identification is an important and challenging task in computer vision with numerous real world applications. Despite significant progress has been made in the past few years, person re-identification remains an unsolved problem. This paper presents a novel appearance-based approach to person re-identification. The approach exploits region covariance matrix and color histograms to capture the statistical properties and chromatic information of each object. Robustness against low resolution, viewpoint changes and pose variations is achieved by a novel signature, that is, the combination of Log Covariance Matrix feature and HSV histogram (LCMH). In order to further improve re-identification performance, third-party image sets are utilized as a common reference to sufficiently represent any image set with the same type. Distinctive and reliable features for a given image set are extracted through decision boundary between the specific set and a third-party image set supervised by max-margin criteria. This method enables the usage of an existing dataset to represent new image data without time-consuming data collection and annotation. Comparisons with state-of-the-art methods carried out on benchmark datasets demonstrate promising performance of our method.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.29-37
• /
• 2000

At present there are many theories as to how various lubricants used in forging perform the role of reducing friction. Little work has been carried out to determine the validity of these theories for solid lubricants. This paper covers the development and preliminary results of the experiments devised to illustrate the movement of graphite at the workpiece/tool interface in the work forging temperature range. The paper describes the results obtained from upsetting of rings between two flat dies for measurement of lubricant thickness and compaction of graphite for density-pressure relationship. These allowed the lubricant to be exposed to forging conditions and by applying the principles of Male's ring test the simple generation of a value fur friction factor could also be determined. The experiments have been undertaken to examine the behavior of lubricant for shot blasted surface and change of surface roughness. A simple computer model of the interface has been constructed characterizing the graphite layer in an attempt to simulate the boundary mechanics.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.67-72
• /
• 2001

An Effort has been made to more accurately analyze the flow in the chip cavity, particularly to model the flow through the openings in the leadframe and correctly treat the thermal boundary condition at the leadframe. The theoretical analysis of the flow has been done by using the Hele-Shaw approximation in each cavity separated by a leadframe. The cross-flow through the openings in the leadframe has been incorporated into the Hele-Shaw formulation as a mass source term. The optimization program based on the complex method integrated with flow analysis program has been successfully used to obtain the optimal filling conditions to avoid short shot.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.15-18
• /
• 2006

비디오를 내용 별로 분할하기 위한 최소 단위는 비디오의 샷이다. 따라서 비디오 내용 정보를 분석함에 있어서 비디오의 샷 경계 검출은 필수적인 과정이다. 이러한 샷 전환 과정은 급격한 샷 전환 과정과 점진적인 샷 전환 과정으로 구분할 수 있다. 점진적인 샷 전환 과정의 경우 전환 과정이 여러 프레임들에 걸쳐 발생되는 관계로 점진적인 샷 전환 과정을 검출하기 위하여, 기존 샷 경계 검출 알고리즘은 일정 간격을 슬라이딩한 윈도우 프레임들 간의 차이를 비교하는 방식을 이용하였다. 기존 슬라이딩 윈도우 방법은 점전적인 샷 전환 과정을 검출하기 위하여 고정된 크기의 윈도우 하나만을 이용하였다. 이 경우, 슬라이딩 윈도우의 길이가 점진적인 샷 전환 과정에 비해 짧으면, 샷 전환을 검출하지 못 한다. 슬라이딩 윈도우의 길이가 샷의 길이보다 길면 샷을 점진적인 샷 전환으로 검출하는 오류가 발생된다. 상기 문제점을 개선하기 위하여 본 논문에서는 서로 다른 크기의 다수의 슬라이딩 윈도우들과 적응적 경계치를 적용한 샷 경계 검출 방법을 제안한다.

• Journal of Korea Multimedia Society
• /
• v.22 no.8
• /
• pp.874-886
• /
• 2019

To delve into the semantic gap problem of the automatic video summarization, we focused on an endogenous ERP responses at around 400ms and 600ms after the on-set of audio-visual stimulus. Our experiment included two factors: the topic exploration of experimental conditions (Topic Given vs. Topic Exploring) as a between-subject factor and the topic relevance of the shots (Topic-Relevant vs. Topic-Irrelevant) as a within-subject factor. For the Topic Given condition of 22 subjects, 6 short historical documentaries were shown with their video titles and written summaries, while in the Topic Exploring condition of 25 subjects, they were asked instead to explore topics of the same videos with no given information. EEG data were gathered while they were watching videos in real time. It was hypothesized that the cognitive activities to explore topics of videos while watching individual shots increase the amplitude of endogenous ERP at around 600 ms after the onset of topic relevant shots. The amplitude of endogenous ERP at around 400ms after the onset of topic-irrelevant shots was hypothesized to be lower in the Topic Given condition than that in the Topic Exploring condition. The repeated measure MANOVA test revealed that two hypotheses were acceptable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.2
• /
• pp.86-98
• /
• 1996

This study is intended to revaluate old tree, five of the shot of the Natural Monument and 66 shot trees under protection in the city at present. The study covers distribution, management of usage, investigation and research into various matters relating to the situation of old trees in Pusan. Because 60% of the old trees selected for protection is on private land, citizens have difficulty gaining access to them. Also space for growth is impinged on by various urban facilities. Some trees have problems of growth because the land is covered with cement and asphalt. As regards space for old trees, many places have been destroyed due to the lack of protection fences and the failure to establish a guidance board. Only 40% of the space has been set aside for rest. In these places the establishment of rest areas, benches and handy chairs is needed. And there are 20 holy places where people observe religious ceremonies. As for space security necessary for old trees according to trunk width, the minimum trunk width and availale area needed are more than 1:1.5, but less than 30% have the necessary space. The growth of many old trees is threatended because of the small apace for growth. The prescription of the boundary space is divided between inside and outside. This indicates the domain nature and space rank of the old tree. It can be classified into five forms for research purposes. The elements for prescription of critical space outside are connected with the security of space, and the elements relating to inside space portray the conditions for sensitive growth according to the institution and the ground conditions. The open and closed nature of old tree space has some connection with the relationship between usage and the intimacy of the user. Most of the spaces for old trees can't be used or are difficult to gain access to, so it is necessary to secure enough space for them. The 18 places, despite having easy access, are near farmland, hills or forest. So the intimacy factor is low, and the security of space of the old trees is not generally sufficient. Henceforth, it will be necessary to have security of area for old trees as well as maintenance control to protect them. Also the space should be used as a communal and recreation are in the city. It is the time to construct a landscaped area which people can easily approach, a place with a secure entrance where they can play, rest and converse.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.1-1
• /
• 2005

Japan Aerospace Exploration Agency(JAXA) has been conducting research and development of the Scramjet engines and their derivative combined cycle engines as hypersonic propulsion system for space access. Its history will be introduced first, and its recent advances, focusing on the engine performance progress, will follow. Finally, future plans for a flight test of scramjet and ground test of combined cycle engine will be introduced. Two types of test facilities for testing those hypersonic engines. namely, the 'Ramjet Engine Test Facility (RJTF)' and the 'High Enthalpy Shock Tunnel (HIEST)' were designed and fabricated during 1988 through 1996. These facilities can test engines under simulated flight Mach numbers up to 8 for the former, whereas beyond 8 for the latter, respectively. Several types of hydrogen-fueled scramjet engines have been designed, fabricated and tested under flight conditions of Mach 4, 6 and 8 in the RJTF since 1996. Initial test results showed that the thrust was insufficient because of occurrence of flow separation caused by combustion in the engines. These difficulty was later eliminated by boundary-layer bleeding and staged fuel injection. Their results were compared with theory to quantify achieved engine performances. The performances with regards to combustion, net thrust are discussed. We have reached the stage where positive net thrust can be attained for all the test coditions. Results of these engine tests will be discussed. We are also intensively attempting the improvement of thrust performance at high speed condition of Mach 8 to 15 in High Enthalpy Shock Tunnel (HIEST). Critical issues for this purposemay be air/fuel mixing enhancement, and temperature control of combustion gas to avoid thermal dissociation. To overcome these issues we developed the Hypermixier engine which applies stream-wise vortices for mixing enhancement, and the M12-engines which optimizes combustor entrance temperature. Moreover, we are going to conduct the flight experiment of the Hypermixer engine by utilizing flight test infrastructure (HyShot) provided by the University of Queensland in fall of 2005 for comparison with the HIEST result. The plan of the flight experiment is also presented.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.303-312
• /
• 2008

Multi-axial compression tests have been frequently adopted for the evaluation of material properties of rock cores and rock fracture model tests. Special care has to be applied on the boundary condition between the specimen and loading platen to draw the precise test results of the multi-axial compression tests. With the use of dry steel platen, the stress rotation will occur, due to the frictional restraint from the boundary between the specimen and loading platen. The restraint will deviate the expected test results under the conditions of the given external pressures. Various methods have been applied to reduce the side restraint along the specimen/loading platen interface. The steel brush type loading platen is one example of the attempts. In this paper, a new type of loading platen is introduced to overcome the limitation caused by the use of the brush type loading platen, which requires some internal space for the installation of the brushes. The new type of loading platen, roller supported steel piston type loading platen. is constituted of shot steel pistons which have sufficient stiffness to deliver the external pressure and the shaft type roller installed at the rear of the pistons. The pistons are designed to follow the local deformation of the specimens. In this paper, structural details of the loading platen are presented and frictional and biaxial compression tests results are shown to verify the required functions of the loading platen. Furthermore, calibration process is followed by a comparison between the test results and numerical analyses.