• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.87-92
• /
• 2002

A short-ended electromagnetically coupled coaxial dipole array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are obtained by solving the simultaneous linear equations. The effects of slot and strip numbers on the radiation efficiency, beamwidth and directivity gain of the antenna are presented.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.399-403
• /
• 2000

A new type of collinear antenna called short-ended coaxial slot-coupled strip array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are then obtained by solving the simultaneous linear equation. The effects of slot and strip number on the radiation efficienty, beamwidth and directivity gain are also presented.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.116-122
• /
• 2009

We introduce a measurement method that enables to measure the penetration depth($\lambda$) of superconductor films by using a short-ended parallel plate sapphire resonator. Variations in the $\lambda$ of $MgB_2$ films could be measured down to the lowest temperature using a sapphire resonator with a $YBa_2Cu_3O_{7-x}$ film at the bottom. A model equation of $\lambda=\lambda_0[1-(T/T_c)^{\tau}]^{-1/2}$ for $MgB_2$ films appeared to describe the observed variations of the resonant frequency of the sapphire resonator with temperature, with $\lambda_0,\;\tau$, and $T_C$ used as the fitting parameters.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.238-242
• /
• 2000

In this paper, the method for dielectric constant and less tangent measurements of microwave substrates using a microstrip line is presented. The two samples of an open-ended line and a short-ended tine are made and complex propagation constant is evaluated from the one-port scattering parameter measurements. This method has been automated fully using a personal computer and a vector network analyzer.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.69-69
• /
• 2009

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.165-180
• /
• 1999

Static load tests were performed for open-ended piles, closed-ended piles, piles with grouted toe, and base-grouted piles by using calibration chamber. Then vertical bearing capacities determined from load tests were compared with each other. The stability of base-grouted pile during a simulated seaquake was investigated by changing the penetration depth. Also, static load tests and seaquake tests for 2-piles and 4-piles group were performed. The bearing capacity of the pile grouted inside the toe was 11.2~30.8% less than that of open-ended pile because of reduction of base resistance due to disturbance of base soil under pile toe. The bearing capacity of a base-grouted pile was 23.8~33.9% more than that of an open-ended pile and was similar to that of a closed-ended pile. The bearing capacity of base-grouted group pile was increased ; the bearing capacity of base-grouted 2-piles group increased 14.6~31.8% compared to that of open-ended 2-piles group, and that of base-grouted 4-piles group increased 15.3~22.4% compared to that of open-ended 4-piles group. During the simulated seaquake in deep sea, stability of base-grouted pile was found to be dependent on the pile penetration depth. During seaquake motion, single long base-grouted pile longer than 20m was stable and short base-grouted pile shorter than 12m failed. But relatively long base-grouted pile longer than 12m kept mobility state. Bearing capacity of base-grouted group pile with penetration depth less than 7m was degraded a little bit ; so, base-grouted group pile could maintain mobility condition.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.254-262
• /
• 2009

This paper presents a novel simple filter design method based on a parallel short-ended coupled-line structure with capacitive loading for size reduction and ultra-broad rejection of spurious passbands. In addition, the introduction of a cross-coupling capacitor into the miniaturized coupled-line can create a transmission zero at the second harmonic frequency for better frequency selectivity and attenuation level. The aperture compensation technique is also applied to achieve a strong coupling in the coupled-line section. The influence of using the connecting transmission line to cascade two identical one-stage filters is studied for the first time. Specifically, such a two-stage bandpass filter operating at 2.3 GHz with a fractional bandwidth of 10% was designed and realized with low-temperature co-fired ceramic technology for application in base stations that need high power handling capability. It achieved attenuation in excess of -40 dB up to $4f_0$ and low insertion loss of -1.2 dB with the size of 10 mm ${\times}$ 7 mm ${\times}$ 2.2 mm. The measured and simulated results showed good agreement.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.317-324
• /
• 2004

Electromagnetically coupled coaxial dipole (ECCD) array antenna with and without short-ended termination is investigated theoretically. The integral equations are derived for the structure by use of the Fourier transform and mode expansion of radial waveguide. The integrals appearing in the integral equations are evaluated along the branch cut instead of real axis for a faster convergent integral. The effects of slots and dipoles, short-ended termination length, and dielectric coating on the radiation characteristics are presented. Radiation pattern of the structure is also investigated. The results of the present method are compared with those of the commercial EM simulator and good agreement is found.

• Korean Journal of Child Studies
• /
• v.21 no.1
• /
• pp.163-178
• /
• 2000

Institutions included in this study of emergency short term shelters for children in crisis included 2 public counseling centers providing short term protection services for children and 12 emergency shelters for runaway children located in a metropolitan city in Korea. The institutions were examined with respect to their establishment, management, and programs. The researcher visited and interviewed workers employed in the institutions. In additions, 12 children who had been cared for emergency shelters were surveyed with open-ended questions. The data consisted of information on founders, locations, purpose, current management, personnel, length of care, and number and grouping of children. Programs and daily schedules were also examined. Effective models of emergency short term shelters were discussed on the basis of the collected data.