• 천문학회보
• /
• 제46권1호
• /
• pp.55.2-56
• /
• 2021

The progenitor of Type Ia supernovae (SNe Ia) is mainly believed to be a close binary system of acarbon-oxygen white dwarf (CO WD) and non-degenerate companion (single degenerate) or another WD (double degenerate). However, it is unclear which system is more prevalent. Here, we present a high cadence optical/Near-IR light curve of normal but slightly faint type Ia SN 2019ein from IMSNG project. We fit the early light curve (t <+8.3 days from the first detection) with various models to find the shock-heated cooling emission from SN ejecta-companion interaction. No significant shock-heated cooling emission is found, from which we constrain the progenitor star size as the following. The upper limit (R_upper,*) of the companion size in R-band is ~0.2R_⊙ when forcing the first light time (t_fl) to have one value and ~0.9R_⊙ when using the mean value of tfl from the fitting in each band. Assuming the source of the I-band curve is almost powered from the radioactive decay, we obtained R_upper,*~1.2R_⊙. The early B-V color curve is in agreement with the model color curve of the 2M_⊙ main sequence companion. These results allow us to at least rule out large stars like red giants as a companion star of the binary progenitor system of this supernova. B-R and V-R color do not show any significant signs of a red bump, which shows a thin helium shell (MHe<0.1M_⊙) for the sub-Mch WD (double detonation model). In addition, we estimated the distance to NGC 5353 as 37.098±0.028Mpc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.155-156
• /
• 2023

In the case of steel door frames commonly found in general buildings, there are various assembly methods such as rivets, bolts, and welding, but the welding method is generally used. However, this welding joint method has many problems, such as distortion due to heat and damage due to external shock. In particular, when used as a fire door, problems may occur in the event of a fire due to distortion caused by heat from welding and the weak welded joint area. In the case of rivet or welded joints, when moved after assembly, joint loosening due to external shock may occur. Problems may arise where the bonding strength becomes weak. In addition, with the recent increase in high-rise buildings and larger buildings, when assembly is completed and brought to the site, a place is needed to store it, and in addition, there is a problem in that it has to be transported several times in small quantities to the installation site, which is another problem of time and cost loss. This is coming to the fore. In order to fundamentally solve this problem, we have researched and developed a non-welding door frame that can be assembled on site. We have researched and developed three assembly methods: screw-type, insert-type, and protrusion-type. Non-welded door frames are small in size and easy to package, making them advantageous for domestic and overseas exports.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.471-493
• /
• 2013

This paper presents a framework for seismic damage evaluation for Algerian buildings adapted from HAZUS approach (Hazard-United States). Capacity and fragility curves were adapted to fit the Algerian building typologies (Reinforced Concrete structures, Confined or Non-Confined Masonry, etc). For prediction purposes, it aims to estimate the damages and potential losses that may be generated by a given earthquake in a prone area or country. Its efficiency is validated by comparing the estimated and observed damages in Boumerd$\grave{e}$s city, in the aftermath of Boumerd$\grave{e}$s earthquake (Algeria: May $21^{st}$ 2003; $M_w$ = 6.8). For this purpose, observed damages reported for almost 3,700 buildings are compared to the theoretical predictions obtained under two distinct modelling of the seismic hazard. In one hand, the site response spectrum is built according to real accelerometric records obtained during the main shock. In the other hand, the effective Algerian seismic code response spectrum (RPA 99) in use by the time of the earthquake is considered; it required the prior fitting of Boumerd$\grave{e}$s site PGA (Peak Ground Acceleration) provided by Ambraseys' attenuation relationship.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.108-111
• /
• 2003

The main objective of this paper is to module design and pressure relief test a new type of polymer gapless surge arrester for power distribution line. Metal oxide surge arrester for most electric power system applications, power distribution line and electric train are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of gapless elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion.

• 천문학회보
• /
• 제42권1호
• /
• pp.51.2-51.2
• /
• 2017

Diffuse radio relics are often detected in merging galaxy clusters and are emitted by synchrotron process. Radio relics are believed to trace the shock waves in the intracluster medium induced by ram pressure during a major cluster merger. Radio halos and relics are found in approximately 50 galaxy clusters to date that are all in a state of merging. The rarest of these galaxy clusters contain pairs of relics of similar brightness as well as a radio halo. The massive galaxy cluster PLCKG287.0+32.9 belongs to this rare population and is the second most significant detection from the Planck SZ All-sky Survey. Perhaps even more intriguing is that the radio relics are observed at vastly different distances from the X-ray peak requiring a complex merging scenario. In this study, we use weak-lensing to peer deeper into the merging scenario by reconstructing the dark matter distribution. We relate the mass distribution to the radio, X-ray, and optical emissions to provide constraints for future simulations of the merger. Fitting an NFW profile to the tangential shear we infer the mass of the cluster and discuss its implications for the merging scenario.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.175-179
• /
• 2005

The main objective of this paper is to module design and pressure relief test a new type of polymer gapless surge arrester for power distribution line. Metal oxide surge arrester for most electric power system applications, power distribution line and electric train are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of gapless elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion.

• 전자공학회논문지SC
• /
• 제48권2호
• /
• pp.47-55
• /
• 2011

전 세계적으로 상해로 인한 사망자 중 1/3의 직접적인 사망 원인은 출혈성 쇼크이다. 그러나 초기 쇼크에서 이를 정확히 예측할 수 있다면 신속한 치료가 가능하여 그 피해를 줄일 수 있다. 본 논문의 목적은 흰쥐의 대퇴부정맥을 통해 일정량의 출혈을 시키면서 변화하는 생리적 변수인 심박수, 수축기 혈압, 평균 동맥압, 호흡수, 체온 데이터로 최적의 생존 예측 모델을 제시하여 출혈성 쇼크를 조기 진단하는 것이다. 예측 모델로는 최근 많이 연구되는 인공신경망과 지원벡터기계 방법을 사용하였다. 과대적합을 피하고 최적의 모델을 선정하기 위해 10-fold cross validation을 수행하였을 때, 인공신경망의 경우 은닉노드 수가 3개인 모델이 가장 우수한 성능을 보였고, 지원벡터기계에서는 가우시안 커널함수를 이용한 모델이 가장 우수한 성능을 보였다. 평가 데이터 세트를 이용하여 각각의 생존 예측 모델을 평가한 결과 인공신경망의 경우 민감도 88.9 %, 특이도 96.7 %와 정확도 92.0 %를 보였고, 지원벡터기계의 경우 민감도 97.8 %, 특이도 95.0 %와 정확도 96.7 %를 보였다. 따라서 출혈에 따른 흰쥐의 생존 예측에서 지원벡터기계가 인공신경망보다 더 우수한 성능을 보이는 것을 확인하였다.

• 한국지구과학회지
• /
• 제28권2호
• /
• pp.202-213
• /
• 2007

2007년 1월 20일 평창군 진부면 오대산 일대에서 발생한 오대산 지진$(M_L=4.8)$은 천발지진(진원깊이 약 10 km)으로서 감진구역이 남한 남서부 일부를 제외한 전역에 이르렀다. 본진에 의한 최대 진도는 VI으로 VI에 해당하는 지역은 평창군 진부면, 도암면, 강릉, 주문진, 평창을 포함하는 지역으로서 강한 지진동과 함께 건물 실내외부 벽의 균열발생, 지붕의 기와나 스레트의 낙하 및 이동, 실내외 벽 타일의 떨어짐, 선반위 물체의 떨어짐, 도로의 낙석 등이 발생하였다. P파 초동극성과 SH/P 진폭비 자료를 이용한 단층면해는 본진의 경우 북북동-남남서 주향의 주향이동 단층운동을 나타내며, 2회의 여진은 남북 내지 북북동-남남서 주향의 역단층 운동이 우세함을 보인다. 전진, 본진 및 여진의 분포, 피해 지역 분포, 단층면해 등을 종합적으로 고려할 때 진앙지 부근에 우세하게 발달하고 있는 북북동-남남서 주향의 월정사단층이 기진 단층의 역할을 했을 것으로 추정된다. 여진 분포로 짐작컨대 subsurface에서의 이 단층의 파쇄 길이는 약 2 km로 판단되며, 추후 이 단층에 대한 고지진학적 조사가 필요하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2038-2040
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and subway are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrestor and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise. etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
• /
• pp.74-77
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock. pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.