• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.181-190
• /
• 2007

This paper presents a collision avoidance system for intelligent ship. Unlike collision avoidance system of other unmanned vehicles, the collision avoidance system for intelligent ship aims at not only deriving a reasonable and safe path to the goal but also keeping COLRECs(International Regulations for Preventing Collisions at Sea). The heuristic search based on the BK-products is adopted to achieve the general purpose of collision avoidance system; deriving a reasonable and safe path. The rule of action to avoid collision is adopted for the other necessary and sufficient condition; keeping the COLREGs. The verification of proposed collision avoidance system is performed with scenarios that represent encounter situations classified in the COLREGs, then it is compared with $A^{\ast}$ search method in view of optimality and safety. The analysis of simulation result revels that the proposed collision avoidance system is practical and effective candidate for real-time collision avoidance system of intelligent ship.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.241-257
• /
• 2020

The rapid proliferation of oil/gas drilling and wind turbine installations with jack-up rig-formed structures increases structural safety requirements, due to the greater risks of operational collisions during use of these structures. Therefore, current industrial practices and regulations have tended to increase the required accidental collision design loads (impact energies) for jack-up rigs. However, the existing simplified design approach tends to be limited to the design and prediction of local members due to the difficulty in applying the increased uniform impact energy to a brace member without regard for the member's position. It is therefore necessary to define accidental load estimation in terms of a reasonable collision scenario and its application to the structural response analysis. We found by a collision probabilistic approach that the kinetic energy ranged from a minimum of 9 MJ to a maximum 1049 MJ. Only 6% of these values are less than the 35 MJ recommendation of DNV-GL (2013). This study assumed and applied a representative design load of 196.2 MN for an impact load of 20,000 tons. Based on this design load, the detailed design of a leg structure was numerically verified via an FE analysis comprising three categories: linear analysis, buckling analysis and progressive collapse analysis. Based on the numerical results from this analysis, it was possible to predict the collapse mode and position of each member in relation to the collision load. This study provided a collision strength assessment between attendant vessels and a jack-up rig based on probabilistic collision scenarios and nonlinear structural analysis. The numerical results of this study also afforded reasonable evaluation criteria and specific evaluation procedures.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.103-117
• /
• 1995

A design-oriented method for analysis of the structural damage due to ship collisions is developed by using the idealized structural unit method(ISUM). The method takes into account yielding, crushing, rupture, the coupling effects between local and global failure of the structure, the influence of strain-rate sensitivity and the gap/contact conditions. The method is verified by a comparison of experimetal and numerical results obtained from test models of double-skin plated structures in collision/grounding situations with the present solutions. As an illustrative example, the method has been used for analyses of a side collision of a double-hull tanker. Several factors affecting ship collision response. namely the collision speed and the scantlings/arrangements of strength members, are discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.169-176
• /
• 2005

An analysis of the annual frequency of collapse(AF) is performed for each bridge pier exposed to ship collision. From this analysis, the impact lateral resistance can be determined for each pier. The bridge pier impact resistance is selected using a probability-based analysis procedure in which the predicted annual frequency of bridge collapse, AF, from the ship collision risk assessment is compared to an acceptance criterion. The analysis procedure is an iterative process in which a trial impact resistance is selected for a bridge component and a computed AF is compared to the acceptance criterion, and revisions to the analysis variables are made as necessary to achieve compliance. The distribution of the AF acceptance criterion among the exposed piers is generally based on the designer's judgment. In this study, the acceptance criterion is allocated to each pier using allocation weights based on the previous predictions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.17-22
• /
• 2013

If we were in a head-on or crossing situation with a target ship and did not know the target ship's intention to change her course, we might be confused about our decision making to change our course for collision avoidance and be in a danger of collision. In order to solve these problems, we need to develop an automatic system which enables mariners to easily detect a change in the target ship's course and efficiently avoid being on a collision course. In this paper, we proposed an early detection method on altering course of a target ship using the steering wheel signal. This method will contribute to the reduction of collision accidents and also be used to the VTS system and the analysis of marine accidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1753-1763
• /
• 2013

In the design phase of sea-crossing bridge projects, ship collision problem is mostly participated in decision of substructure section and it would be performed by risk assessment and impact simulations. Ship collision risk is assessed by probability model which is similar to method II of Guide Specification and Commentary for Vessel Collision Design of Highway Bridge(AASHTO, 2009). However, several factors used in the applicable code are limited to inland waterways or have many local characteristics. Accordingly, it should be needed judgement of engineer or referred to related criteria, research finding. In this study risk assessment for In-cheon bridge and review of existing substructure's impact risk and resistance capacity are performed using the 2010's ship passage data. And then consideration regarding to presumption and applied instance of factors needed for risk assessment and related research findings are performed on the basis of AASHTO Guide's Method. As a result of study, adequate variable region of factors needed for risk assessment is defined and sensitivity analysis for appropriate region is performed. Consequently, factors that should be applied carefully or needed for direct analysis of local data are confirmed. This research could be fundamental material to risk assessment related to design for sea-crossing bridge taken into account ship collision.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.201-208
• /
• 2017

The major cause of the marine accidents is the collision with a moving object such as ship as well as the fixed object such as breakwater. Therefore, the most effective way to reduce the maritime ship accidents is the prevention of collision. In order to decrease the collision, it is principle that the navigation officer promptly judges the dangerous condition and makes the quick response. The ship does not allow any object or other ships approaching its surrounded area called ship area so that it prevents the collision. Generally, the ship which has high speed or poor maneuvering capability shall be managed from the distance so that the other ship does not invade its ship domains(watching distance, blocking distance). Accordingly, this study sets the navigational risk assessment model by applying ship dynamic domain and collision judgement method considered ship length, speed and navigational capability. It also reviewed the validity of the model and evaluated the perilous water way (Maenggol Channel) and a curved route near Maenggol Channel. As a result, in case of a ship with 100m in length passing Maenggol Channel, it represented "warning" level before 1.5nm to the entry, "dangerous"level 0.75nm before to it and "very dangerous" level 0.5nm before to it and then "dangerous"level again up to the entry. Applying to the curved route also showed the same results as the Narrow Channel or Maenggol Channel. This analysis highly matched with the actual navigation results. In the future, this model will be useful for coastal navigation safety chart development and safety evaluation for route or port development. It also allows to evaluate the dangerous route or the best route by applying the result into ECDIS so that it will finally help to reduce the marine accidents. Eventually the model will be effective for the marine traffic simulation evaluation forced by Maritime Traffic Safety Act.

• Journal of Navigation and Port Research
• /
• v.32 no.7
• /
• pp.529-535
• /
• 2008

As a method to reduce collision accidents of ships at sea, this paper suggests an expert system for collision avoidance and navigation (hereafter "ESCAN"). The ESCAN is designed and developed by using the theory and technology of expert system and based on the information provided by AIS and RADAR/ARPA system. In this paper the ESCAN is composed of four(4) components; Facts/Data Base in charge of preserving data from navigational equipment, Knowledge Base storing production rules of the ESCAN, Inference Engine deciding which rules are satisfied by facts or objects, User System Interface for communication between users and ESCAN. The ESCAN has the function of real--time analysis and judgment of various encountering situations between own ship and targets, and is to provide navigators with appropriate plans of collision avoidance and additional advice and recommendation This paper, as a basic study, is to introduce the basic design and function of ESCAN.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.469-476
• /
• 2020

Modeling and Simulation (M&S) systems which deal with situational complexity often require human involvement due to the high-level decision-making that is necessary for ship movement, navigation, control center management, shipping company logistics, meteorological system information, and maritime transportation GIS. In order to properly simulate maritime traffic, it is necessary to accurately model the human decision-making process of the ship officer, including aspects of the ship officer's behavioral tendencies, personal navigation experience, and pattern of voyage errors, as this is the most accurate way in which to reproduce and predict realistic maritime traffic conditions. In this paper, which looks at agent-based maritime traffic simulation, we created a basic survey in order to conduct behavior analysis on ship operators' collision avoidance strategies. Using the information gathered throughout the survey, we developed an agent-based navigational behavior model which attempts to capture the behavioral patterns of a ship officer during an instance of ship collision. These results could be used in the future in further developments for more advanced maritime traffic simulation.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.34-37
• /
• 2007

The safety of ships is one of the most important concerns in terms of the environment and human life. A ship in bad condition is likely to be subject to accidents, such as collision and grounding. When a ship has minor collision damages in the form of circle or ellipse, its ultimate strength will be reduced. It is important to evaluate the reduction ratio of a ship's ultimate strength that results from damages. The strength reduction of a plate with a cutout in the form of hole has been treated by many researchers. A closed-form formula for the reduction of ultimate strength of a plate, considering the effect of several forms of cutout, has been suggested. However, the structure of ships is composed of plates and stiffeners so-called stiffened plates and it is likely that plates and stiffeners will be damaged together in collisions. This paper investigates the effect of minor collision damages on the ultimate strength of a stiffened plate by using numerical analysis. For this study, the deformed shape of minor collision damages on a stiffened plate was made by using a contact algorithm and was used as the initial shape for ultimate stress analysis. Then, a series of nonlinear FE analyses was conducted to investigate the reduction effects on the ultimate strength of the stiffened plate. The boundary conditions were simply supported at all boundaries, and the tripping of stiffener was neglected. The results are presented in the form of reduction ratio between the ultimate strength of an original, intact stiffened plate and that of a damaged stiffened plate.