• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.87-92
• /
• 2014

Recently, use of thick Al 5083 plate has increased in production of LNG storage tank. In general, multi-pass welding has been used to achieve sufficient penetration in thick plate welding. High current welding which enables high deposition and deep penetration is preferred in thick plate welding because the increase of number of pass increases manufacturing cost and formation of weld defect. In this study, welding characteristics according to various Ar/He shielding gas composition was investigated in high current MIG welding. The bead-on-plate welding and V groove welding were conducted on Al 5083 alloy with a thickness of .25 mm. The effect of shielding gas composition on bead shape was evaluated and proper shielding gas composition was proposed. Also arc stability was examined under selected shielding gas composition. One side-one pass welding experiments were conducted for V groove specimen with a thickness of 25 mm. Mechanical properties and hardness profiles were measured for the V groove specimens.

• 한국가구학회지
• /
• 제28권4호
• /
• pp.259-267
• /
• 2017

Furniture should change according to space. Therefore, it is important that the flexibility of the furniture, the functional efficiency, the economical efficiency and the convenience of the furniture of today. These characteristics are also important for seminar tables that are used temporarily by a large number of people. The seminar furniture currently in use has no shielding plate, there are two forms of table and shielding plate folding table. Therefore, in this research, furniture design and product development that can complement the shortcomings of the seminar furniture currently in use were done. Analysis of problems through overseas investigation and domestic market research, design planning and design, and prototyping. We have sought to optimize the volume by applying the characteristics of RTA furniture to develop a lightweight, lightweight, lightweight, easy to install and easy to use shielding plate, and open and closed system. Basically developed two types of shielding board seminar table basic shape and Roll Screen type, we expanded the scope of application such as each color and pattern. In order to reduce the weight, we replaced the parts such as anchor bolts and hinges and the shielding plate with Roll Screen and pursued volume optimization. As a result of this research, it is expected that the system of mechanisms such as packaging standardization and damage prevention for weight reduction and volume optimization will contribute to building competitiveness by domestic office prefabricated furniture industry's original technology.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.1-8
• /
• 2014

Recently, damages resulting from light trespass that affects the human body (sleep) as one of light pollution control elements of outdoor Luminaires equipment are leading to continuous civil complaints and disputes and this is gradually expanding into a social problem. Accordingly, this study considers the need to develop a shielding plate in consideration of light distribution performance as an efficient measure to cope with damages from light trespass. Therefore, this study developed a shielding plate for LED Luminaires with a fine view that maximally inhibited light toward the backlight area compared to existing shielding plates and verified its performance.

• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.767-773
• /
• 2014

본 논문에서는 무한 도체 평판의 슬릿 부근에 도체판을 부가하여 슬릿으로 침투하는 전자파의 저감 특성을 검토하였다. 이론 해석에는 FDTD 법을 사용하였으며, 부가 도체판의 형상 및 길이, 간격, 두께의 변화에 따른 침투 전계의 특성을 계산하여 부가 도체판의 구조 변화가 침투 전자파의 저감 특성 및 차폐 효과 특성에 미치는 영향을 고찰하였다. 그 결과, 부가 도체판의 구조 변화에 따라 차폐 효과, 침투 전계의 특성이 변화하는 것을 관찰할 수 있었고, 침투 전계를 최소로 하는 부가 도체판의 최적 구조가 있음을 확인할 수 있었다.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.57-62
• /
• 2009

This paper deals with the optimal design of a shield plate in order to minimize Extremely-Low-Frequency(ELF) magnetic fields generated from three-phase bus bars. Combining an evolutionary strategy with a 3D finite element analysis tool, the main dimensions of the shield plate are sought out. The optimization procedure consists of two separated design stages to take into account all foreseen structures of the plate. In the first stage, the basic dimensions of the plate are optimized including the distance between the plate and the bus bars. Then the usefulness of the additional structures such as a slit and fillet is investigated in the second stage. Finally the optimum design of the shield plate is suggested from the viewpoint of the shielding effectiveness and manufacturing cost.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권3호
• /
• pp.461-468
• /
• 2017

본 연구는 진단용 X선 에너지 영역에서 고순도의 납 0.5mm 와 실리콘(Si)과 이산화티탄($TiO_2$)을 이용한 X선 융합차폐체의 선량을 측정하고 차폐율을 비교 측정하였다. 실험을 위하여 실리콘(Si)과 이산화티탄($TiO_2$)을 혼합하여 1 mm 두께의 패드형 차폐체를 제작하고, 차폐체의 두께를 1mm 씩 증가시키며 X선을 조사하여 0 mR이 될 때까지 선량을 측정하였다. KS A 4025의 권고에 따라 X선 조사조건은 각각 60 kVp 20 mAs, 100 kVp 20 mAs로 하였으며, 두 개의 관전압 조건에서 차폐체가 없을 경우의 조사선량을 기준으로 차폐체가 있을 경우의 선량과 비교하여 차폐율을 구하였다. 두께 0.5 mm 납판 차폐체의 차폐율은 60 kVp에서 95.92%, 100 kVp에서 85.26%로 측정되었고, 실리콘(Si)과 이산화티탄($TiO_2$)패드 차폐체를 적용하였을 경우 60 kVp, 20 mAs 조건에서 두께가 11 mm 이상일 때 10회 조사 평균선량은 1.77 mR, 차폐율은 납판 0.5 mm 차폐체와 등가의 차폐율을 나타내었으며, 13 mm에서 측정선량이 0 mR이 되었다. 100 kVp, 20 mAs 조건에서는 17 mm 두께에서 납 0.5 mm 차폐체와 등가 이상의 차폐율이 관찰 되었고 23 mm 두께에서 100% 의 차폐율을 관찰할 수 있었다. 본 연구 결과를 통해 실리콘-이산화티탄 화합물은 실리콘의 물성이 그대로 존재하면서 금속화합물과 융합할 수 있다는 결과를 얻었으며, 이후 방사선 흡수가 더 뛰어난 금속화합물등과 혼합할 경우 납의 위해성을 포함하지 않으며, 재료와 가공성에서 경제적이며, 실리콘의 강점을 살려 탄성과 유연성이 뛰어난 저선량용 방사선 차폐재의 제작 가능성을 확인해 볼 수 있었다.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.106-113
• /
• 1998

In this study, the plug weldability of STS 304 was investigated. The parameters which influence plug weldability were pushing pressure of the plates, position of welding wire and composition of shielding gases. Among these factors, the composition of shielding gases and hole diameter of the upper plate were found to be the major factors influencing weld quality. To evaluate weldability, tensile shear strength of the plug welded specimen was measured and compared with tensile strength of butt welded specimen. Hardness was measured for both plug weld and butt weld. The microstructure of the weld metal and HAZ were also characterized.

• 한국방사선학회논문지
• /
• 제15권7호
• /
• pp.949-956
• /
• 2021

본 연구의 목적은 전자빔 치료에서 산란선을 차폐하는 데 사용되는 납의 단점을 극복하기 위한 대체 재료로 텅스텐 나노입자를 선택하여 고선량에서 발생하는 산란선에 차폐 효과가 있는지 여부를 평가하는 것이다. 선량계의 위치와 조사야의 크기를 일정하게 설정하기 위해 판을 자체 제작하였다. 유리 선량계는 10 × 10 cm² 크기의 조사야의 중앙에서 십자로 1, 2, 4 cm 떨어진 지점에 위치하여 12곳의 지점에 위치시켰다. 10 × 10 cm² 크기의 텅스텐 나노입자 차폐체를 0.4, 0.75, 1 mm의 소재로 두께 0.75 mm에서 최대 두께 4.0 mm의 총 12가지 유형의 차폐가 적용되었다. 선형가속기를 사용해서 6 MeV에서 4회, 12 MeV에서 4회 측정하였고 선량의 세기는 100 MU로 조사하였다. 실험 결과 조사야로부터 1 cm 거리에서 4 mm 차폐판이 가장 높은 차폐 효과를 보였다. 조사야로부터 2 cm 거리에 적용된 1 mm 차폐판이 차폐 효과가 가장 낮았다. 텅스텐 차폐판의 두께가 두꺼워짐에 따라 전자선 차폐 효과는 급격히 증가하였다. 결론적으로 텅스텐 나노입자는 전자빔 치료에서 납의 대체 재료로 사용이 가능함을 확인하였다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제5권1호
• /
• pp.37-50
• /
• 2020

Development of lightweight implant plates are important to reduce the stress shielding effect for a prosthesis of femur bone fractures. Stainless steel (SS-316L) is a widely used material for making implants. Stress shielding effect and other issues arise due to the difference in mechanical properties of stainless steel when compared with bone. To overcome these issues, composite materials seem to be a better alternative solution. The comparison is made between two biocompatible composite materials, namely Ti-hydroxyapatite and Ti-polypropylene. "Titanium (Ti)" is fiber material while "hydroxyapatite" and "polypropylene" are matrix materials. These two composites have Young's modulus closer to the bone than stainless steel. Besides the variety of bones, present paper constrained to femur bone analysis only. Being heaviest and longest, the femur is the most likely to fail among all bone failures in human. Modelling of the femur bone, screws, implant and assembly was carried out using CATIA and static analysis was carried out using ANSYS. The femur bone assembly was analyzed for forces during daily activities. Ti-hydroxyapatite and Ti-polypropylene composite implants induced more stress in composite implant plate, results less stress induced in bone leading to a reduction in shielding effect than stainless steel implant plate thus ensuring safety and quick healing for the patient.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.230-236
• /
• 2012

Shielding the air-gap magnetic field of the electrodynamic wheel below a conductive plate and opening the shielding plate partially, a thrust force and a normal force generate on the conductive plate at the open area. But, as only the variable controlling both forces is a rotating speed of the electrodynamic wheel, it is very difficult to control the forces independently by the speed. So, we discuss a novel method controlling the forces effectively through manipulating a size of the open area. The independent control is made possible by virtue of the feature that the relative ratio between both forces is irrelevant to an air-gap length and determined uniquely for a specific rotating speed of the wheel. Therefore, the rotating speed and the size of open area become new control variables. The feasibility of the method is verified experimentally. Specially, the controllable magnetic forces are used in a noncontact conveyance of the conductive plate.