• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.208-214
• /
• 2015

The aim of this study is to investigate the effect of low magnetic field on dose distribution in the partial-breast irradiation (PBI). Eleven patients with an invasive early-stage breast carcinoma were treated prospectively with PBI using 38.5 Gy delivered in 10 fractions using the $ViewRay^{(R)}$ system. For each of the treatment plans, dose distribution was calculated with magnetic field and without magnetic field, and the difference between dose and volume for each organ were evaluated. For planning target volume (PTV), the analysis included the point minimum ($D_{min}$), maximum, mean dose ($D_{mean}$) and volume receiving at least 90% ($V_{90%}$), 95% ($V_{95%}$) and 107% ($V_{107%}$) of the prescribed dose, respectively. For organs at risk (OARs), the ipsilateral lung was analyzed with $D_{mean}$ and the volume receiving 20 Gy ($V_{20\;Gy}$), and the contralateral lung was analyzed with only $D_{mean}$. The heart was analyzed with $D_{mean}$, $D_{max}$, and $V_{20\;Gy}$, and both inner and outer shells were analyzed with the point $D_{min}$, $D_{max}$ and $D_{mean}$, respectively. For PTV, the effect of low magnetic field on dose distribution showed a difference of up to 2% for volume change and 4 Gy for dose. In OARs analysis, the significant effect of the magnetic field was not observed. Despite small deviation values, the average difference of mean dose values showed significant difference (p<0.001), but there was no difference of point minimum dose values in both sehll structures. The largest deviation for the average difference of $D_{max}$ in the outer shell structure was $5.0{\pm}10.5Gy$ (p=0.148). The effect of low magnetic field of 0.35 T on dose deposition by a Co-60 beam was not significantly observed within the body for PBI IMRT plans. The dose deposition was only appreciable outside the body, where a dose build-up due to contaminated electrons generated in the treatment head and scattered electrons formed near the body surface.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.256-273
• /
• 1999

Seventy two isolates of Cordyceps militaris collected from 11 sites in Korea, including two isolates from ATCC, were used to assess genetic variation within Cordyceps militaris. The anamorph stage and cultural characteristics of C. militaris were observed through microscope and investigated on PDA respectively. The anamorphs of C. militaris were identified to be Verticillium. Isolates of C. militaris showed different growth rates, morphology and color. Fifty six isolates of single ascospore and seventy two isolates of mass ascospore from C. militaris were analysed using by Random Amplified Polymorphic DNA (RAPD) for genetic relationship analysis. Fifty six single ascospore isolates fell into two groups by phenogram constructed from distance values using the UPGMA method in NTSYS-pc software: group A from artificial fruit body of C18 except for isolate 51; group B from artificial fruit body of C738. The average genetic distance value within group A is 0.150 and group B is 0.163. The average genetic distance value between the two groups is 0.221. The average genetic distance value within 56 single ascospores is 0.207 and 72 mass ascospores is 0.330. Genetic relationships were not found among 72 mass ascospore isolates obtained from eleven geographically distant populations.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.227-238
• /
• 2006

Genomic DNAs(gDNAs) were isolated from the venus clam(Gomphina aequilatera) from Samcheok(venus clam from Samcheok; VCS) and Wonsan(venus clam from Wonsan; VCW) located in the East Sea of the Korean Peninsula. The amplified products were generated by agarose gel electrophoresis(AGE) with oligonucleotides primer, detected by staining with ethidium bromide and viewed by ultraviolet ray. The seven arbitrarily selected primers BION-21, BION-23, BION-25, BION-27, BION-29, BION-31 and BION-33 generated the shared loci, polymorphic, and specific loci, with the molecular sizes ranging from 150 bp to 2,400 bp. In this study, 147 polymorphic loci(147/954 loci, 15.41%) in VCS population and 274(274/996 loci, 27.51%) in VCW population were generated with seven primers. These results suggest the genetic variation in VCW population is higher than in VCS population. Especially, the 700 bp bands generated by the primer BION-21 were identified commonly in two Gomphina populations, which identified populations and/or species. This specific primer was found to be useful in the identification of individuals and/or population, resulting from the different DNA polymorphism among individuals/species/population. Two Gomphina populations between the individual SAMCHEOK no. 03 and WONSAN no. 22 showed the longest genetic distance(0.696) in comparison with other individuals used. The complete linkage cluster analysis indicating three genetic groupings and dendrogram revealed close relationships among individual identities within two geographical populations of venus clam(G. aequilatera) from the Samcheok and Wonsan. The intra-species classification and clustering analyses inferred from molecular markers supported the traditional taxonomy of the species based on morphological characters such as shell size, shape and color. Accordingly, as mentioned above, RAPD analysis showed that VCS population was more or less separated from VCW population.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.413-422
• /
• 2022

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

• The Korean Journal of Malacology
• /
• v.23 no.2
• /
• pp.189-198
• /
• 2007

The reproductive cycle, egg capsules in the egg-mass, first sexual maturity, and sex ratio of the bladder moon, Glossaulax didyma ($R\ddot{o}ding$) were investigated. The gastropods collected from the intertidal zone of Biin Bay, Seocheon, Korea were studied by using histological analysis and morphometric data. The gonadosomatic index (GSI) of females and males began to increase in March and reached maximum in May. Then their values sharply decreased from late in May to August due to spawning. The condition index (CI) began to increase in February and reached maximum in May, then gradually declined in the spawning period. The CI calculated for determination of the spawning period was coincided with changes in the GSI and gonadal phases. Spawning occurred between late in May to August in females and early in May to August in males. Spawning peak was observed between July and August when the seawater temperature rose to 19 $^{\circ}C$. Reproductive cycle with the gonadal development phases of this species can be divided into five successive stages in females and four in males: in females, early active stage (December to February), late active stage (February to March), ripe stage (April recovery stage (August to November); in males, active stage (December to March), ripe stage (March to July), copulation stage (early May to August), and recovery stage (August to January). Fully matured oocytes were approximately 250-270 ${\mu}m$ in size. The egg-mass was a hat in shape, and a number of egg capsules were found in an egg-mass. An egg capsule was 0.53-0.57 mm in size. An embryo (veliger larva) hatched from an egg capsule. Percentage of first sexual maturity in females and males were over 50% for individuals that are 40.1-45.0 mm in shell radius, and 100% for those that are over 45.1 mm. The sex ratio of female to male was significantly different from 1:1 $(x^2\;=\;57.22,\;p\;<\;0.05)$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.107-112
• /
• 1968

In order to study the effect of potash on the growth and yields of Soybean at different level of soil fertility and application of fertilizer (nitrogen, phosphate and calcium), $2^3$factorical experiment was carried out by pat culture with variety 'Chang-dan-baec-muc' which is most spreaded variety in Korea. The experiment consisted of five replications in a randomized block experiment with three factors (soil, fertilization and potash). Treatment were at two levels; infertile and fertile soil, none and some of fertilization and potash. Thus, the experiment comprised eight treatment combinations which consisted of all combinations. The results of this experiment are as follows: 1. No effect of each of three factors on flowering date was found. 2. Leaf-yellowing and maturing date was quickened on the fertile soil but no effect of fertilization and potash was found. 3. More premature leaf-yellowing was found on the fertile soil. 4. Deeper leaf colour cuss showed on the fertile soil and in the case of fertilization but no effect of potash was found. 5. Increasing tendency of following character: length and width of leaf, height and dia of stem, number of branches and pods; was most remarkable on the fertile soil. Application of fertilizer showed also remarkable tendency of increasing, while increasing tendency of potash was the least. 6. Same tendency was found with following charactors; weight of total plant. stem and shell, and commercial grains, weight of 100 grain and number of commercial grains. 7. As the results of analysis of variance for weight of commercial grain it, was found the teach of the three factors increased soybean yields significantly (weight of commercial grain) but the effect of potash was less than the other two factors. No significant interaction was found among three factors. 8. Greater effect of potash on increasing soybean yields was found on the fertile soil, and in the case of fertilization.

• Journal of Nutrition and Health
• /
• v.49 no.5
• /
• pp.335-346
• /
• 2016

Purpose: This study was conducted to conduct dietary assessment of Korean adults according to intake of Korean soup and stew. Methods: To accomplish this study, 20,926 adults aged 19 yr or higher who participated in the dietary intake survey (24 h recall method) were analyzed from the data of the 2011~2014 Korea National Health and Nutrition Examination Survey (KNHANES). The items included in the soup and stew were guk, tang, jjigae, jijimi, and jeongol. Results: Intakes of soup and stew of subjects were divided into quartiles; intake range by quartile was Q1: < 22.96 g, Q2: 22.96~98.75 g, Q3: 98.75~212.23 g, and Q4: $${\geq_-}212.24g$$. In the case of the Q4 group, male, married, employed, higher educated, and high income subjects showed increased intakes of soup and stew. In addition, sodium intake among nutrient intakes increased from 3,849.04 mg in Q1 group to 5,363.57 mg in Q4 group. Intakes of cereals/grains, potatoes/starches, legumes, seeds/nuts, vegetables, mushrooms, fruits, meat, fishes/shell fishes, milks/dairy products, oils/fats, and seasonings among all foods significantly increased from Q1 group to Q4 group. Lastly, in the multivariable regression analysis, male, higher age, married, eating breakfast, consumption of snacks, prepared meals from home/institution, average eating-out frequency per week, energy consumption, and sodium intake related parameters increased intake of Korean soup and stew. Conclusion: Excessive intake of sodium was related to high blood pressure and metabolic syndrome. Thus, there are needs to improve dietary guidelines and nutrition education for balanced intake of soup and stew.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.181-186
• /
• 2011

Thermal stability of the $TiO_2$ SCR catalyst with W03 loading was investigated in terms of structural and morphological analyses. The $TiO_2$ catalysts with 10 w% $WO_3$ content and without $WO_3$ were prepared. which were heat-treated at $800^{\circ}C$ for 5 h. It was found that the catalytic acidity was decreased by thermal degradation in the $WO_3-TiO_2$ specimen that relatively less than the $TiO_2$ specimen from FT-IR analysis. The phase transition of the $TiO_2$ catalyst from anatase to rutile was increased by heal-treatment, and the percentage of the rutile phase was 28.4 % in the $WO_3-TiO_2$ and 22.9 % in the $TiO_2$. A shell region of $WO_3$ distinguished from a $TiO_2$ particle was also observed in the grain boundary region, and the $WO_3$ led to the suppression of grain growth. It could be confirmed that the suppression of grain growth can contribute to the improvement of catalytic properties for thermal stability more than the increase of anatase-rutile phase transformation which cause the reduction of the catalytic activity in the $TiO_2$ SCR catalyst by the presence of $WO_3$.