• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1116-1122
• /
• 2005

A finite element method was used to simulate the wave propagation of laser-generated ultrasound and its interaction with surface breaking cracks in an elastic material. Thermoelastic laser line source on the material surface was approximated as a shear dipole and loaded as nodal forces in the plane-strain finite element (FE) model. The shear dipole- FE model was tested for the generation of ultrasound on the surface with no defect. The model was found to generate the Rayleigh surface wave. The model was then extended to examine the interaction of laser generated ultrasound with surface-breaking cracks of various depths. The crack-scattered waves were monitored to size the crack depth. The proposed model clearly reproduced the experimentally observed features that can be used to characterize the presence of surface-breaking cracks.

• 수산해양기술연구
• /
• 제27권2호
• /
• pp.120-124
• /
• 1991

이상의 결과를 정리하면 다음과 같이 요약할 수 있다. (1)Karman의 적분 방정식에 미소 거칠기 영향을 고려함으로서 디퓨져 닥트 표면의 경계층 계산에 응용한 결과 모멘트 적분법 및 실험치와의 비교에서 개선된 결과임이 확인되었다. (2) 국소 거칠기의 효과를 주는 방법으로는 Cole의 벽 및 와 법칙에 Clauser의 거칠기 함수와, 압력 기울기를 고려한 부가 형상계수 값으로 적분 방정식에 응용할 수 있다. (3) 국소 거칠기 분포에 의하여 경계층 특성을 교란시켜 표면 마찰력 계수를 줄일 수 있어 마찰력 손실을 줄일 수 있는 방안이 제시되었다.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.301-320
• /
• 2009

Damage assessment for buried structures against an internal blast is conducted by considering the soil-structure interaction. The structural element under analysis is assumed to be rigid-plastic and simply-supported at both ends. Shear failure, bending failure and combined failure modes are included based on five possible transverse velocity profiles. The maximum deflections with respect to shear and bending failure are derived respectively by employing proper failure criteria of the structural element. Pressure-Impulse diagrams to assess damage of the buried structures are subsequently developed. Comparisons have been done to evaluate the influences of the soil-structure interaction and the shear-to-bending strength ratio of the structural element. A case study for a buried reinforced concrete structure has been conducted to show the applicability of the proposed damage assessment method.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.1-4
• /
• 2015

An accurate measurement of the train-track interaction forces is important for track performance evaluation. In the field calibration test as a wheel load measurement process, the calibration system creates a different boundary condition in comparison with that in the train wheel passage. This study aims to evaluate a reliability of the field calibration test in the process of wheel load measurement. Finite element models were developed to compare the deformed shapes, bending moment and shear force profiles on the rail section. The analysis results revealed that the deformed shapes and their associated bending moment profiles on the rail are significantly different in two numerical simulations of the calibration test and the train wheel load passage. However, the shear stress profile on the rail section of the strain gauge installation in the field was almost identical, which may imply that the current calibration test is sufficiently reliable.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.37-46
• /
• 2021

In this study, a method for free vibration analysis of wall-frame systems built on weak soil is proposed. In the development of the method, the wall-frame system that constitutes the superstructure was modeled as flexural-shear beam. In the study, it is accepted that the soil layers are isotropic, homogeneous and elastic, and the waves are only vertical propagating shear waves. Based on this assumption, the soil layer below is modeled as an equivalent shear beam. Then the differential equation system that represented the behavior of the whole system was written for both regions in a separate way. Natural periods were obtained by solving the differential equations by employing boundary conditions. At the end of the study, two examples were solved and the suitability of the proposed method to the Finite Element Method was evaluated.

• 한국지진공학회논문집
• /
• 제8권6호통권40호
• /
• pp.1-11
• /
• 2004

이전의 연구(1)에서는 해석적 및 수치적 방법을 사용하여 전단변형 및 회전관성효과를 고려하는 현수교의 수직진동에 대하여 유한요소법을 이용하여 이동하중 해석을 수행하였다. 본 연구에서는 전단변형 및 회전관성 효과가 고려된 Hermitian 다항식을 사용하는 현수교요소를 이용하여 현수교의 수직진동에 대한 고유치 해석을 수행하고 이를 이용한 현수교요소와 차량 및 열차와의 상호작용을 고려한 운동방정식을 유도한다. 이와 같이 모드중첩법을 이용하여 유도된 운동방정식을 수치적분방법으로 Newmark $\beta$ Method를 사용하여 동적해석을 수행하였다.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.667-675
• /
• 2020

The current study compares the effect of structure-soil-structure interaction (SSSI) on the dynamic responses of adjacent buildings and isolated structures including soil-structure interaction (SSI) with the responses of fixed-base structures. Structural responses such as the relative acceleration, displacement, drift and shear force were considered under earthquake ground motion excitation. For this purpose, 5-, 10- and 15-story structures with 2-bay moment resisting frames resting on shallow foundations were modeled as a group of buildings in soft soil media. Viscous lateral boundaries and interface elements were applied to the soil model to simulate semi-infinite soil media, frictional contact and probable slip under seismic excitation. The direct method was employed for fully nonlinear time-history dynamic analysis in OpenSees using 3D finite element soil-structure models with different building positions. The results showed that the responses of the grouped structures were strongly influenced by the adjacent structures. The responses were as much as 4 times greater for drift and 2.3 times greater for shear force than the responses of fixed-base models.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.173-193
• /
• 2013

In this paper, influence of geometric configurations of multi-story bracing on shear lag behaviour of braced tube structures is investigated. The shear lag of 24-, 36- and 72-story braced tube structures are assessed considering all possible configurations of overall X and Chevron bracing types. Based on the analytical results, empirical equations, useful for the preliminary design phase, are proposed to provide the optimum number of stories that braced, in order to exert minimum shear lag on structures. Studying the interaction behaviour of a tube and different bracing types along with paying attention to the shear lag behaviour, a better explanation about the reasons behind the efficiency of a specific bracing module in decreasing the shear lag is developed. The analytical results show that there are distinct differences between the anatomy of braced tube structures with X and Chevron bracing regarding the shear lag behaviour.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1994년도 추계 학술발표회
• /
• pp.11-11
• /
• 1994

A new theoretical fabric shear model has been presented and a quantitative study has been conducted on the shear properties of polyethylene(terephthalate)(PET) fabrics of four different fabric densities and five different weight reduction. The fabric shear properties were measured with KES-F handle measurement system. From the theoretical and experimental studies, following results can be summarized : 1) The fabric shear behavior is strongly dependent on the fabric density and free volume available for the constituent yarns and their filament. 2) Shear hysteresis at the small shear angle(2HG) is dependent more on the yarn tensile properties than on the fabric structure. 3) Shear hysteresis at the shear angle, 5(2HG5) is dependent more on the interaction between two crossing yarns which is directly related on the fabric structure than on the yarn tensile properties.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.391-394
• /
• 2005

A theoretical model was developed to predict the shear strength of slender reinforced concrete beams. The shear force applied to a cross-section of the beam was assumed to be resisted primarily by the compressive zone of intact concrete rather than by the tensile zone. The shear capacity of the cross section was defined based on the material failure criteria of concrete: failure controlled by compression and failure controlled by tension. In the evaluation of the shear capacity, interaction with the normal stresses developed by the flexural moment in the cross section was considered. In the proposed strength model, the shear strength of the beam and the location of the critical section were determined at the intersection between the shear capacity and shear demand curves. The proposed strength model was verified by the comparisons to prior experimental results.