• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.247-254
• /
• 2003

최근에 건설공사에서 발생하는 환경문제에 대한 관심이 고조되는 가운데 저소음, 저진동 공법인 매입말뚝공법이 건설현장에 많이 적용되고 있다. 이러한 건설여건의 변화에 부흥하여 국내에서는 지반을 굴착하고 시멘트 페이스트를 주입한 후 기성말뚝을 삽입하는 SIP공법(Soil-Cement Injected Precast Pile)의 적용이 늘고 있으나, 현재 국내 지반조건에 맞는 고유의 관계식이 없는 실정이다. 이와 같은 문제해결에 기여하기 위해, 본 연구에서는 SIP말뚝 주면과 지반사이의 저항력을 직접전단시험으로 측정하여 그 경향을 분석하였다. 직접전단시험 결과 SIP말뚝의 주면 저항력 성분이 수직하중에 가장 크게 영향을 받는다는 것을 밝혀내고 국내 주요 토질인 SM, SC 토질에서 이를 인자로 한 최대주면저항력 산정식을 제안하였다. 또한 말뚝 표면과 주면 지반과의 전단저항 거동 특성을 수치적으로 정확히 묘사하기 위해 Duncan(1971)의 쌍곡선 모델식과 새로운 비선형 수치모델식에 따른 계수산정식을 제안하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.425-426
• /
• 2002

Lineal and angular movements of many engine components make the lubricant absorb air and the aerated lubricant greatly influences the clearance performance of contacting behaviors of engine components such as big-end bearing, cam and tappet, etc. This study investigates the behaviors of aerated lubricant in the gap between con-rod bearing and proceeding which is one of the most frictional energy consuming components in the engine. Our assumption for the analysis of aerated lubricant film is that the film formation is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant by absorbing the bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. In our investigation, it is found that these two major factors surprisingly increase the load capacity in certain ranges of bubble sizes and densities. Frictional forces are also influenced by the aerated bubble size and density, which eventually enlarge the shear resistance due the surface tension, Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio under the dynamic loading condition. From the calculated load capacity by solving modified Reynolds' equation, proceeding locus is computed with Mobility method at each time step.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.257-276
• /
• 1996

In North America, a large number of concrete old slab-on-steel girder bridges, classified noncomposite, were built without any mechanic connections. The stablizing effect due to slab/girder interface contact and friction on the steel girders was totally neglected in practice. Experimental results indicate that this effect can lead to a significant underestimation of the load-carrying capacity of these bridges. In this paper, the two major components-concrete slab and steel girders, are treat as two deformable bodies in contact. A finite element procedure with considering the effect of friction and contact for the analysis of concrete slab-on-steel girder bridges is presented. The interface friction phenomenon and finite element formulation are described using an updated configuration under large deformations to account for the influence of any possible kinematic motions on the interface boundary conditions. The constitutive model for frictional contact are considered as slip work-dependent to account for the irreversible nature of friction forces and degradation of interface shear resistance. The proposed procedure is further validated by experimental bridge models.

• 한국지반신소재학회논문집
• /
• 제8권1호
• /
• pp.33-40
• /
• 2009

본 논문에서는 도로를 보강하는 토목섬유 중 지오셀을 이용하였을 때의 보강효과를 알아보기 위해서 실내시험과 현장시험을 실시하였다. 실내 시험은 실대형 직접전단시험기와 모형토조 직접전단시험기를 이용하여 수직응력에 따른 전단응력 곡선을 산정하고 이를 통해 지오셀이 점착력과 내부마찰각을 증가하는 효과를 볼 수 있었다. 실내시험의 결과값을 Terzaghi 공식과 Meyerhof의 공식을 이용하여 극한지지력값을 계산하고 현장시험에서 확인한 극한 지지력값과 비교하여 지오셀의 보강효과를 확인하였다. 분석결과, 직접전단시험을 통해 지오셀의 보강효과가 내부마찰각의 증가에 영향을 미치는 것을 확인하였다. 또한 셀의 개수가 커질수록 내부마찰각이 커짐을 확인하여 보강면적이 넓을수록 보강효과가 증가하는 것으로 나타났다. 지지력에 미치는 영향요소중 내부마찰각을 증가시키는 지오셀을 도로저부에 시공할 경우 내부마찰각의 증가로 지지력 또한 증가하는 것을 확인하였으며, 평판재하시험의 결과값을 통해 지오셀보강이 극한지지력값의 증가효과에 2배정도의 보강효과를 확인하였다. 수치해석을 통해 변형의 분포와 침하량을 확인한 결과, 침하량은 지오셀에 의해 줄어드는 결과를 보여 침하에 대한 보강효과를 확인하였다.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.165-181
• /
• 2014

In the past decade, different types of underreamed ground anchors have been developed for substructures requiring uplift resistance. This article introduces a new type of umbrella-shaped anchor. The uplift behavior of this ground anchor in clay is studied through a series of laboratory and field uplift tests. The test results show that the umbrella-shaped anchor has higher uplift capacity than conventional anchors. The failure mode of the umbrella-shaped anchor in a large embedment depth can be characterized by an arc failure surface and the dimension of the plastic zone depends on the anchor diameter. The anchor diameter and embedment depth have significant influence on the uplift behavior. A finite element model is established to simulate the pullout of the ground anchor. A parametric study using this model is conducted to study the effects of the elastic modulus, cohesion, and friction angle of soils on the load-displacement relationship of the ground anchor. It is found that the larger the elastic modulus and the shear strength parameters, the higher the uplift capacity of the ground anchor. It is suggested that in engineering design, the soil with stiffer modulus and higher shear strength should be selected as the bearing stratum of this type of anchor.

• 한국지반공학회논문집
• /
• 제27권11호
• /
• pp.17-25
• /
• 2011

본 연구는 모래로 부분치환된 점토지반 위의 줄기초의 지지력 특성에 대한 것이다. 극한 지지력을 구하기 위해 FEM해석을 사용하였으며 부분치환은 기초의 폭의 비와 양단의 경사로 정의 하였다. B'=inf인 경우는 모래층이 점토층과 같은 반무한체인 경우로 이 때의 극한 지지력이 부분치환된 지반에서의 극한 지지력과 비교를 위해 사용하였다. 지지력 효율 ${\beta}$는 B'=inf인 경우의 극한 지지력과 부분치환에 의한 극한 지지력의 비로 모래로 부분치환된 점토지반의 지지력 특성을 파악하기 위해 사용하였다. 각각 3가지의 점토의 비배수 전단강도와 모래의 내부마찰각을 고려하였다. 분석결과 부분치환 시의 지지력효율 ${\beta}$에 가장 큰 요인은 치환깊이이다.

• 한국지반환경공학회 논문집
• /
• 제14권12호
• /
• pp.23-30
• /
• 2013

비동결된 지반에서의 말뚝기초 지지력은 주면마찰력과 선단지지력에 의해 지배되는 것과 달리 동토지역에서의 말뚝기초지지력은 일반적으로 주면마찰력에 의해 지배된다. 동토지역에서 말뚝기초와 동결토 사이 접촉면에서 발현하는 주면마찰력은 동착강도로 정의하며, 동착강도는 동토지역 말뚝기초의 설계 지배정수로 알려져 있다. 동토지역에서 말뚝기초의 지지력을 지배하는 설계정수인 동착강도 특성을 분석하기 위하여 지난 50여 년 동안 많은 연구가 수행되었으며, 현재에도 활발히 연구가 수행 중에 있다. 하지만 동착강도의 경우 토사의 물성특성, 말뚝표면의 거칠기 및 외부적인 시험조건에 의하여 민감하게 반응하는 것으로 알려져 있어 현재까지 진행된 많은 연구들은 제한된 영향인자를 고려하여 수행되었다. 본 연구에서는 동결온도 및 수직응력 조건에 따른 동착강도 특성을 분석하기 위하여 대형 냉동챔버 내에서 직접전단시험을 수행하였으며, 시험결과를 바탕으로 기존에 동일한 조건으로 측정된 동결토 전단강도와 상관관계를 분석하였다. 또한, 향후 동결토 전단강도를 활용하여 동착강도를 추정할 수 있는 동착강도 비례계수를 산정하였으며, 기존 연구와의 비교분석을 통하여 기존 계수에 대한 문제점을 고찰하였다.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.90-99
• /
• 1994

To investigate the undrained shear strength characteristics of marine soils with high water content, high compressibility and weak bearing capacity, a series of undrained triaxial tests with pore pressure measurements on undisturbed and disturbed Banwol marine clay in normally consolidated and overconsolidated states is carried out. The results and main conclusions of this study are summarized as follows : 1 . When the consolidation pressure is increased, the maximum deviator stress of disturbed and undistubed clay in normally consolidated state is increased. Pore pressure parameters and internal friction angle of undisturbed clay are greater than those of disturbed clay. 2. The relationship between pore pressure and axial strain of undisturbed clay in normally consolidated state can be expressed as a hyperbolic function like stress-strain relation proposed by Kondner. 3. In the pore pressure-axial strain relation of disturbed clay in normally consolidated state, failure ratio R'f is greatly deviated in the range of 0.7~0.9 proposed by Christian and Desai. 4. For overconsolided clay, when overconsolidation ratio (OCR) is increased, normalized maximum deviator stress is increased and maximum pore pressure is decreased gradually. 5. Cohesion of overconsolidated clay is greater than that of nomally consolidated clay and internal friction angle slightly is decreased. 6. Pore pressure parameter at failure (Af) of overconsolidated clay is varied with OCR, Af becomes negative values with increment in OCR

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.135-147
• /
• 2023

Sand columns in clayey soil are considered one of the most economical and environmentally-friendly soil-improving techniques. It improves the shear strength parameters, reduces the settlement, and increases the bearing capacity of clayey soils. The aim of this paper is to study the effect of grain shape in sand columns on their performance in improving the mechanical properties of clayey soils. An intensive series of consolidated-drained triaxial tests were performed on clay specimens only and clay specimens with sand columns. The parameters examined during the experimental work were grain shape in sand columns (angular, rounded, sub-rounded) and effective confining pressure (50 kPa, 100 kPa, 200 kPa). The results indicated that there is a significant improvement in the deviatoric stress and stiffness values of specimens with sand columns. Improving deviatoric stress values in the use of angular sand grains was found to be higher than those in the use of sub-rounded and rounded sand grains. A 187%, 159%, and 153% increment in deviatoric stress values were observed for the sand columns with angular, sub-rounded, and rounded grain shapes, respectively. The specimens were observed to be more contractive as the sand column was installed, and as the angularity of grains in the sand column was increased. Sand column installation improves significantly the angle of internal friction, and the effective angle of internal friction increases as the angularity of the sand grains increases.