• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.330-338
• /
• 2016

Impregnation of shear-thickening fluid(STF) into high-strength fabrics makes a considerable improvement on the ballistic performance of fabric armors. Understanding dissipation augmentation due to shear thickening effects on yarn-yarn and yarn-projectile friction is of great importance in liquid armor research. This paper takes a shearthickening effect into account in numerical simulations by using a velocity-dependent friction model. Impact simulations were performed to validate the friction model as well as to evaluate the ballistic performance of STF-fabrics. Impact simulations on neat fabrics were also conducted to provide baseline results for comparison.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.85-91
• /
• 2011

Computational results with pseudoplastic fluid flows for fully developed non-Newtonian laminar flows have been obtained. Those consist of the product of friction factor and Modified Reynolds number and Nusselt numbers with respect to the shear rate parameter in an annular pipe. The numerical results of the product of friction factor and Reynolds numbers and the Nusselt numbers for both Newtonian region and the power law region were compared with previously published asymptotic results, respectively. In the present calculations, the product of friction factor and Newtonian Reynolds numbers for pseudoplastic fluid at power law region in annular pipe is 180% less than that for Newtonian fluid. For power law fluids with different power law flow indices, the difference of the product of friction factor and power law Reynolds number between previous and the present results at the power law region is within 0.20%. The solutions also show the effect of the shear rate parameter on the Nusselt number and about 11% increase of Nusselt number at the power region.

• 한국지반공학회논문집
• /
• 제37권5호
• /
• pp.5-17
• /
• 2021

본 연구에서는 링전단시험 결과를 이용하여 말뚝-사질지반 사이의 전단거동을 정량화하였다. 링전단시험은 가장 일반적인 말뚝재료 - 콘크리트와 강 - 와 대표적인 사질토인 주문진표준사를 대상으로 수행하였으며, 두 재료 사이의 전단거동을 항복 이전과 잔류전단거동을 중심으로 확인하고 분석하였다. 시험결과를 통하여 다양한 상재압과 상대밀도의 영향 또한 분석하여, 그에 따른 전단거동을 각 재료 별 대표적인 마찰각으로 정량화하였다. 더 나아가, 추가적인 대변형 수치해석을 통하여 시험결과를 검증하였다. 링전단시험 및 수치해석을 수행한 결과, 사질토의 전단 중 발생하는 팽창과 수축특성에 의하여 전단거동을 크게 두 가지로 구분할 수 있었다. 1) 상대밀도가 높은 시료일수록 두 재료 간 전단응력곡선은 첨두전단응력이 관찰된 후 잔류전단응력이 발현되는 개형을 나타내었고, 반면에 2) 상대밀도가 낮은 시료일수록 두 재료 간 전단응력곡선은 첨두전단응력의 발현 없이 바로 잔류전단응력이 발현되는 이중곡선 형태를 보였다. 상재압은 소변형 범위에서는 전단거동 형태와 마찰각에 영향을 주지만, 상대밀도와 마찬가지로 대변형 하에서는 유의미한 영향을 주지 않는 것으로 확인되었다. 본 연구는 리메싱을 통한 대변형 수치해석 기법을 정립하여 링전단시험과 같은 대변형 전단거동을 모사하고 예측할 수 있도록 하였을 뿐 만 아니라, 링전단시험을 통하여 도출되고 대변형 수치해석으로 검증된 말뚝 재료와 사질토 사이의 마찰각은 실제 기초 말뚝의 수치해석과 설계에 적용할 수 있도록 하였다.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.79-86
• /
• 2002

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting system. According to this analysis, when cutting Inconel 718, 61, 64 and 55% of the total energy is consumed in the shear process with the helix angle 30$^{\circ}$, 40$^{\circ}$ and 50$^{\circ}$ respectively, and the balance is consumed in the friction process. With the helix angle of 40$^{\circ}$ the specific cutting energy consumed is smaller than with the helix angle 30$^{\circ}$ and 50$^{\circ}$.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.102-109
• /
• 1996

Effects of frictional laws on finite element solutions in metal forming were investigated in this paper. A rigid-viscoplastic finite element formulation was given with emphasis on the frictional laws. The Coulomb friction and the constant shear friction laws were compared through finite element analyses of compression of rings and cylinders with different aspect ratios, ring-gear forging, multi-stage cold extrusion and hot strip rolling under the isothermal condition. It has been shown that two laws may yield quite different results when the aspect ratio of a process and the fractional contact region are large.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.583-588
• /
• 2002

As environmental problem in course of construction has been a matter of interest, noise and vibration in the process of piling are considered as a serious problem. For this reason, the use of SIP method inserting pile as soon as boring and cement grouting is rapidly increasing for preventing vibration and noise. But a resonable bearing capacity formula for SIP method does not exit and even the standard specification for domestic condition isn't formed, though the lateral friction between cement paste and the ground does an important role and boring depth largely influences to the design bearing capacity, applying the SIP method . Therefore, the lateral friction was analyzed after the direct shear test worked with the lateral face of SIP and the soil.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.106-112
• /
• 2017

본 연구에서는 콘크리트 시공줄눈 면의 전단마찰 내력을 합리적으로 평가하기 위하여 콘크리트 소성론의 상계치 이론에 기반한 수학적 모델을 제시하였다. 전단면에서 횡보강근의 전단전달에 대한 과대평가를 피하기 위하여 시공줄눈 면에서의 하중전달에 대한 스트럿-타이 모델에서 콘크리트 할렬 및 압괴의 한계상태로부터 전단마찰 내력의 상한값을 유도하였다. 제시된 모델은 시공줄눈 면에서 콘크리트 점착력과 마찰계수를 거친 면의 경우 각각 $0.27(f_{ck})^{0.65}$와 0.95를, 부드러운 면의 경우 각각 $0.11(f_{ck})^{0.65}$와 0.64로 결정하였는데, 여기서 $f_{ck}$는 콘크리트 압축강도이다. 직접전단에 대한 기존 문헌으로부터 수집한 146 실험데이터와의 비교로부터, 제시된 모델은 AASHTO 및 fib 2010 식에 비해 예측 값과 실험 값들의 비의 표준편차 및 변동계수에 대해 더 낮은 값을 보였다. 특히 전단마찰 내력 평가에서 기준식들의 상당한 과소평가 경향과 달리 제시된 모델은 실험결과와 잘 예측하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2001

SIP(Soil cement Injected Precast pile) that inserts a precast pile after injecting a cement paste into a boring has been applied rapidly through the change of construction circumstances. But there isnt any logical equation of a bearing capacity fitted to SIP yet. So Meyerhof equation has mainly been used to predict a bearing capacity in a design stage instead. But it has shortcomings such as lack of confidence because it has derived not from a theory but from an experience obtained from the result of SPT (Standard Penetration Test) and because a penetration depth tends to be deeper by an excessive design that depends on an end bearing capacity of a pile more than a skin frictional resistance. In this study, thereupon, a direct shear test in the laboratory was performed to both SM and SC soils in variable conditions to verify skin friction properties for the purpose of presenting some reasons capable of reducing penetration depths. Through the tests, soil to soil of SM in cohesion, rough panel to soil of SM in friction angle and soil to soil of SM in shear strength tended to be high. And a shear strength increased as its total unit weight increased in all cases.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.63-69
• /
• 2006

This study deals with the friction welding of A2024- T6 to A6061- T6; The friction time was variable conditions under the conditions of spindle revolution of 2000rpm, friction pressure of 50MPa, upset pressure of 100MPa, and upset time of 5.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, of friction weld, and so the results were as follows. 1. When the friction time was 1.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 292MPa, which is $94.2\%$ of the base material's tensile strength(310MPa). At the same condition, the maximum shear strength was 2l2MPa, which is equivalent to $103\%$ of the base material's shear strength (205MPa). 2. At the same condition, the maximum vickers hardness was Hv 146 at A2024- T6 nearby weld interface, which is higher Hv3 than condition of the friction time 0.5seconds, and the maximum vickers hardness was Hvl20 from weld interface of A6061-T6, which is higher Hv28 then base material's. 3. The results of microstructure analysis show that the structures of two base materials have fractionized and rearranged along a column due to heating and axial force during friction, which has affected in raising hardness and tensile strength.

• 소성∙가공
• /
• 제19권8호
• /
• pp.494-501
• /
• 2010

The main objective of this study is to examine the sensitivity of calibration curves of FEA of ring compression test to frictional shear factor. Ring compression test has been investigated by measuring dimensional changes at different positions of ring specimen and they include the changes in internal diameter at the middle and top section of the specimen, outer diameter at the middle and top section, surface expansion at the top surface, respectively. Initial ring geometries employed in analysis maintain a fixed ratio of 6 : 3 : 2, i.e. outer diameter : inner diameter : thickness of the ring specimen, which is generally known as 'standard' specimen. A rigid plastic material for different work-hardening characteristics has been modeled for simulations using rigid-plastic finite element code. Analyses have been performed within a definite range of friction as well as over whole range of friction to show different sensitivities to the interfacial friction for different ranges of friction. The results of investigation in this study have been summarized in terms of a dimensionless gradient. It has been known from the results that the dimensional changes at different positions of ring specimen show different linearity and sensitivity to the frictional condition on the contact surface.