• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1399-1405
• /
• 2012

Transmission cross section characteristics as a measure of transmission efficiency has been analyzed numerically for the H-shaped and C-shaped small apertures in the infinite conducting plane when illuminated by a plane wave. It has been found that C-shaped aperture has the larger transmission cross section than that of H-shaped aperture under the condition of the same perforated aperture area. Main attention has been focused on studying the mutual coupling effect between two C-shaped apertures on the transmission cross section characteristic. Parallel configuration which is composed of two C-shaped apertures arranged along the x-axis and collinear configuration which is composed of two C-shaped arrayed along the y-axis have been investigated from the viewpoint of enhanced transmission cross section characteristics.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.40-48
• /
• 2005

In this study, the muscle strength and endurance of the lumbar at flexion and extension were determined using an isokinetic muscle strength meter (Biodex) in patients with chronic lumbar go (10 male and 10 females), and the changes in muscle strength and endurance of the lumbar at flexion and extension after application of Y-shaped sacrospinalis muscle taping, typically used for patient with lumbar go, were studied. In addition, the sacrospinalis muscle taping of a different shape (I-shaped taping) was applied bilaterally centering on the spine, and the muscle strength and endurance of the lumbar at flexion and extension were determined and compared with those before taping. In addition, the results after application of Y-shaped taping and I-shaped taping were also compared. 1. The extensor muscle strength of the lumbar at loading of $60^{\circ}$/sec before application of kinesio Taping and after application of Y-shaped taping showed the level of significance (p<.05). The flexor muscle strength of the lumbar at loading of $60^{\circ}$/sec before application of kinesio taping and after application of Y-shaped taping did not show the level of significance. 2. The flexor muscle endurance of the lumbar at loading of $90^{\circ}$/sec before application of kinesio Taping and application of Y-shaped taping did not show the level of significance. The extensor muscle endurance of the lumbar at loading of $90^{\circ}$/sec before application of kinesio Taping and after application of Y-shaped taping did not show the level of significance. 3. The extensor muscle strength of the lumbar at loading of $60^{\circ}$/sec before application of kinesio Taping and after application of I-shaped taping showed the level of significance (p<.05). The flexor muscle strength of the lumbar at loading of $60^{\circ}$/sec before application of kinesio Taping and after application of I-shaped taping showed the level of significance (p<.05). 4. The flexor muscle endurance of the lumbar at loading of $90^{\circ}$/sec before application of kinesio taping and after application of I-shaped taping showed the level of significance. The extensor muscle strength of the lumbar at loading of $90^{\circ}$/sec before application of kinesio Taping and after application of I-shaped taping showed the level of significance (p<.05). 5. In comparison between after application of Y-shaped taping and after application of I-shaped taping, the flexor muscle strength of the lumbar at loading of $60^{\circ}$/sec did not show the level of significance. In comparison between after application of Y-shaped taping and after application of I-shaped taping, the extensor muscle strength of the lumbar at loading of $60^{\circ}$/ sec showed the level of significance (p<.05). 6. In comparison between after application of Y-shaped taping and after application of I-shaped taping, the flexor muscle strength of the lumbar at loading of $90^{\circ}$/sec did not show the level of significance. In comparison between after application of Y-shaped taping and after application of I-shaped taping, the extensor muscle strength of the lumbar at loading of $90^{\circ}$/sec did not showed the level of significance (p<.05).

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.32-39
• /
• 2004

Traditional forging of a hollow T-shaped part has been applied to forge a solid T-shaped product from a solid billet and then to machine the hollow in that. In a case, a hollow T-shaped part can be forged by backward-extruding from a solid billet. In this study, four types of forging were suggested for manufacture of hollow T-shaped parts. Forging simulations for each of these forging methods were carried out to investigate folding defect, metal flow pattern, effective strain, and forging loads. Experimental works were carried out to be compared with the simulation results. Here, the ratio of the thickness of the hollow tube to that of the flange was selected to investigate a forging defect like folding.

• Steel and Composite Structures
• /
• v.15 no.1
• /
• pp.41-55
• /
• 2013

This paper presents a numerical study of axially loaded concrete-filled steel tubular columns with "T" shaped cross section (CFTTS) based on the ABAQUS standard solver. Two types of columns with "T" shaped cross section, the common concrete-filled steel tubular columns with "T" shaped cross section (CCFTTS) and the double concrete-filled steel tubular columns with "T" shaped cross section (DCFTTS), are discussed. The failure modes, confining effects and load-displacement curves are analyzed. The numerical results indicate that both have the similar failure mode that the steel tubes are only outward buckling on all columns' faces. It is found that DCFTTS columns have higher axial capacities than CCFTTS ones duo to the steel tube of DCFTTS columns can plays more significant confining effect on concrete. A parametric study, including influence of tube thickness, concrete strength and friction coefficient of tube-concrete interface on the axial capacities is also carried out. Simplified formulae were also proposed based on this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.79-83
• /
• 2001

A cone-shaped active magnetic bearing spindle system for high speed internal grinding is designed and tested. The cone-shaped AMB system consists of only 4 couples of magnet, it can be smaller and lighter than conventional radial-axial-type AMB system. In this paper, the cone-shaped electromagnets are designed by magnetic circuit theory, and de-coupled direct feedback PID controller is applied to control the coupled magnetic bearings. The designed cone-shaped AMB spindle system is built and constructed with a digital control system, and tested its stbility and dynamic performances. As the results of the tests, this spindle runs up to 40,000 rpm with about 5 ${\mu}{\textrm}{m}$ of runout, and the AMB system provides high damping ratio eliminating overshoot and resonance speed.

• Transactions of Materials Processing
• /
• v.23 no.1
• /
• pp.5-9
• /
• 2014

Although much research has been conducted to reduce the thickness of PET bottles in order to save manufacturing costs, the challenge remains of guaranteeing mechanical strength for top-loaded thin PET bottles. The current study investigates the large deformation characteristics of a circle shaped PET bottle and a square shaped PET bottle when compressively loaded using FEA. The arc length method is used in the nonlinear FEA to understand the buckling phenomenon. For PET bottles with the same capacity, the circle shaped bottle shows more resistance to buckling and compression loading than the square shaped bottle.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.111-114
• /
• 2015

In this paper, we have proposed dual-band Phi-shaped slot gap filler antenna for satellite internet service applications. Some properties of the antenna such as return loss, radiation pattern, and gain have been simulated and measured. The proposed antenna has a Phi-shaped slot on the circular patch and is fabricated on the TLX-9 substrate. The radius of the circular patch is 25 mm, and it has a coaxial feeding structure. The dual-band Phi-shaped slot gap filler antenna has high-gain, small-size, simple-structure, and good radiation patterns at each band. The operating frequency band can be tuned by adjusting the length AL and FL of the Phi-shaped slot.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.521-526
• /
• 2002

The seismic performance of structural walls subjected to the cyclic lateral loads are influenced by various factors, like sectional shape, aspect ratio, reinforcement ratio, arrangement of reinforcement, and axial load ratio etc. In this research, reinforced concrete structural walls with the T-shaped cross section were selected. The seismic performance of T-shaped wall was affected by the many (actors because T-shaped wall is irregular wall composed to two rectangular walls. Especially the seismic performance of T-shaped wall varies with the flange condition and the various factors including the flange condition were determined. Therefore, the objective of this study is to understand the factors to improve seismic performance of RC T-shaded tv using sectional analysis.

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.485-492
• /
• 2002

The purpose of this study is to classify of the Cone shaped Pendants in old tombs of Three Kingdom States. These Cone shaped Pendants are made of bronze and coated with gold plate or Gold. Each Cone shaped Pendants consists of a Sehwhan(細環) type or Taewhan type, a median part in the form of a several joined small globe, or circular shape, and finally a cone-shared pendant. Cone shaped Pendants is 5 part(A-L A-b, B-1-a, B-1-b, B-2-b type) in according to the styles of the Sehwhan(細環) and Taewhan type and median ornament types. A-a, A-b, B-1-a, B-1-b type was general style that was found in most of the old tombs in Kokuryo, Pacjae, ancient Silla. B-2-b type was excavated from the only Kokuryo tombs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.450-452
• /
• 2016

The effect of channel doping on L-shaped Tunneling Field-Effect Transistors (TFETs) have been investigated by 2D TCAD simulation. When the source doping is over $10^{20}cm^{-3}$, the subthreshold swing (SS) is abruptly decreased, and when drain doping concentration is below $10^{18}cm^{-3}$, the leakage current in the negative voltage is reduced.