• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.503-508
• /
• 2002

In this study, the relation between the mtation which are usually caused by the creep of the contact wire, the bar geometry and the forces(wire tensions) for the triangle-shaped distribution bar and straight-shaped one in dependent tensioning device system is reviewed. According to the result a rotation of distribution bar in triangle-shaped one modifies the distribution of the tensions between the three wires hooked in a distribution bar. On the contrary, a rotation on the straight-shaped one leads to no tension distribution change. Therefore, to use the straight-shaped distribution bar instead of triangle-shaped one is recommended. In addition, the design contents of the distribution bar which will be used in electrification of Gyeongbu line are described in this paper.

• Journal of Fashion Business
• /
• v.15 no.6
• /
• pp.23-39
• /
• 2011

Scythian Earrings in the Black Sea region had completely degenerated, stifled by motifs and shapes of Greek origin, retaining its representational realism and its full emotional vitality. The purpose of this study is to review and research the symbolic meaning and classifying the types of the Scythian Earrings style through the tombs bequests. The Scythian Earrings were divided into the styles according to the shape, Earring with Ends Shaped like animal's Heads, Boat-Shaped Earrings, Bird-Shaped Pendants earrings, Earrings with a Disc and a Pendant, Earrings Shaped like the Figures, Earring with the drop Pendant, Spiral Earrings. Earrings based on the boat shape enjoyed a long popularity among the Scythians. As that form became elaborated and combined with the disk-pendent, it reflected native rather than Asian or Hellenic tastes. Although Scythian earrings were produced based on the shapes of Greece earrings, they recreated these as Scythian unique style. In particular, the animal motive and the decoration have various changes. The exquisite earrings attest to the elegant taste and splendid wealth of the upper classes.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.621-626
• /
• 2003

This paper is concerned with the numerical analyses of an S-shaped duct for the inter-channel between compressor spools. For the compactness and lightweight of an engine, the length of the S-shaped duct is desired to be minimized. Shortening the S-shaped duct however, flow separation is likely to occur. Numerical investigation using a three-dimensional Navier-Stokes flow solver has been performed to determine the availability of the minimization of an S-shaped duct. Computations are performed introducing the experimental data as the inlet flow condition of the OGV in determining the minimum length of the S-shaped duct. Also, the leaning effect of the OGV which assists the flow to turn radially inward are studied adopting mixing-plane method to consider the rotor/OGV interaction.

• Structural Engineering and Mechanics
• /
• v.7 no.3
• /
• pp.289-302
• /
• 1999

An approximate method for analyzing the bending problems of irregular-shaped plates is proposed. In this paper irregular-shaped plates are such plates as plate with opening, circular plate, semi-circular plate, elliptic plate, triangular plate, skew plate, rhombic plate, trapezoidal plate or the other polygonal plates which are not uniform rectangular plates. It is shown that these irregular-shaped plates can be considered finally as a kind of rectangular plates with non-uniform thickness. An opening in a plate can be considered as an extremely thin part of the plate, and a non-rectangular plate can be translated into a circumscribed rectangular plate whose additional parts are extremely thin or thick according to the boundary conditions of the original plate. Therefore any irregular-shaped plate can be replaced by the equivalent rectangular plate with non-uniform thickness. For various types of irregular-shaped plates the convergency and accuracy of numerical solution by proposed method are investigated.

• Coupled systems mechanics
• /
• v.11 no.3
• /
• pp.233-257
• /
• 2022

This work presents a comparative study between two different models: trapezoidal and T-shaped combined footings. The comparative study between trapezoidal and T-shaped combined footings presented in this paper generatesresultsthat have an unparalleled accuracy for all foundation engineering problems. The main part of this research is to obtain the optimal area, reinforcing steel, and thickness of the trapezoidal and T-shaped combined footings using the new models. The comparison is made for two trapezoidal combined footings and two T-shaped combined footings ofreinforced concrete subjected to the same load.Themain findings are: themodelfortrapezoidal combined footings can be used for rectangular and triangular, and the T-shaped combined footings can be used for rectangular. The structure of the paper is asfollowsfirst a very complete state of the art with extensive referencesthat describesthe methodology used for the different models clearly, presents different numerical examples, results and at the end conclusions.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.381-388
• /
• 2001

Behavior characteristics of coil shaped elastoplastic dampers, a sort of hysteretic damper, are studied on through experiments and numerical analyses. The coil shaped elastoplastic damper shows bilinear force-deformation relationship, and no stress concentration is occurred in the device. Numerical model, which is constructed through calibration with experimental results, shows good agreement with experiment, The coil shaped elastoplastic damper has lower yielding strength and stiffness under transversal loading compared to axial leading. Additional studies are required on behavior characteristics according to configuration variation of coil shaped elastoplastic dampers.

• The Journal of the Korean dental association
• /
• v.50 no.4
• /
• pp.203-210
• /
• 2012

Objective: The aim of this study was to investigate the incidence of the C-shaped canal of permanent mandibular second molar (PMSM) in Korean sub-population using Cone-Beam CT (CBCT) data and analyze the types of C-shaped canal. Materials & Methods: The protocol for this study was approved by the Institutional Review Board at the Pusan National University Hospital (E-2011039). Among the CBCT images taken of patients who visited the St. Bennedict Dental Hospital (Busan, Korea) from May 2008 to April 2011 for implant surgery and surgical removal of impacted teeth, high-quality CBCTs from 705 patients (361 male and 342 female) were screened and 607 PMSMs of 383 patients were evaluated retrospectively. All PMSMs were anatomically analyzed in detail by using image viewer software (EasyDent; Vatech). PMSMs were evaluated in the axial plane to investigate the shape of root and canals. The C-shaped canals were classified into five types. The total incidence, gender ratio, bilateral and unilateral appearance. and the correlation between right-side and left-side occurrences of C-shaped PMSMs were computed and compared statistically using the chi-square test. Results: Among the 607 PMSMs of 383 CBCTs of 187 females and 196 males, 198 PMSMs(32.6%) had C-shaped root and 158 PMSMs(26.0%) had C-shaped canals. The shape of C-shaped root canals at the furcalion level did not have significant change at the level of mid root (P<0.0001). Female had more prevalence of C-shaped root canals than male (P<0.0001). The prevalence of bilateral occurrence of C-shaped root canals was higher than unilateral occurrence. Conclusions: The occurrence of C-shaped PMSMs among a Korean population was 32.6% and was higher than other countries and ethnicities. Understanding the prevalence of PMSMs with a C-shaped root and/or canal in a Korean population may be useful for successful endodontic treatments.

• Korean Journal of Environmental Biology
• /
• v.19 no.4
• /
• pp.248-253
• /
• 2001

These studies were carried out to examine the developmental process of galls caused by aphids in Rhus gavanica and the effects of indole-3-acetic acid (IAA) and ${\alpha}$-naphthalene acetic acid (NAA) on the tannin accumulation in the callus induced from that galls. The results are follows. The development of fist-shaped galls has begun at the beginning of June earlier than the case of finger-shaped galls, and also, the growth of fist-shaped galls has last to September longer than the period of finger-shaped galls. These results indicate that the life cycle and feeding activity of the aphids inhabited in fist-shaped galls were longer and mire active than the case of the aphids inhabited in finger-shaped galls. Tannin contents of fist-shaped galls revealed about 60${\sim}70%$ of total dry weights during the whole growth periods, however, the contents in finger-shaped galls were under 10% at the maximum value. These facts mean that finger-shaped galls seem to be as a habitat of aphids rather than as a major source of tannin such as fist-shaped galls. The growth of callus induced from fist-shaped galls was the most effective in the plot of $10^{-5}$ mole IAA, but the tannin accumulation in callus growth was not even caused in any plots of IAA treatments as wells as in any NAA plots. These results considered that the tannin accumulation in fist-shaped galls may be caused only in specific relation between host plant and life cycle of aphids.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.59-71
• /
• 2011

As an exaggerated-shoulder becomes a growing trend women's clothing, the crescent shaped sleeve with parallel style lines in the arm hole is a highly used women's sleeve pattern. This study develops and provides an applicable method for making the crescent shaped power shoulder sleeve. An efficient basic method for making the 2 piece crescent shaped sleeve was developed and the sensory appearance test was carried out with experimental clothes. There are two principles for making the crescent shaped sleeve: having a style line in the sleeve and pasting part of the cut arm hole of the bodice to the sleeve. The latter would be more convenient for a 2 piece sleeve, mostly used for jackets. The crescent shaped sleeve used in power shoulder jackets should set the shoulder angle as you wish to extend and raise the shoulder point of the bodice and sleeve to the same height. For a stronger power shoulder image, a 3 piece sleeve has a better appearance. Also, the height of the shoulder has to be enhanced with a shoulder pad for a more stable sleeve.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.827-834
• /
• 2014

In this paper, a triple-band U-shaped monopole antenna with T-shaped stub for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of U-shaped of radiating patch, T-shaped strip in U-shaped, for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.