• 패션비즈니스
• /
• 제15권1호
• /
• pp.63-79
• /
• 2011

This study examines the relationship between breast shape and brassiere construction through the comparative analysis of brassiere pattern on the breast shape. This researcher drew the brassiere pattern of developing a pre-study for Chinese female adults according to average size based on the four breast shapes. And then we measures brassiere pattern size and comparatively analyzes breast between size and shape. Comparative analysis results of brassiere patterns are verified differences of size and shape on the breast shape. Above all an angle of cup dart showed remarkable differences on the breast shape. An angle of cup dart isn't proportioned to breast size. An angle of cup dart for cone shape is bigger than dome shape. Because cone shape breast is protruded center part but dome shape breast have a shape of smooth curve like a half globe. So an angle of a cone shape breast cup dart is determined bigger than dome shape breast. For increasing the uplift effect of brassiere, brassiere pattern is different on the breast shape. And a brassiere pattern need different drawing methods about the angle of cup dart, breast inner side diameter, slope and so on. This study has an important significance that it established a mechanical relationship of breast shape and brassiere pattern.

• 복식
• /
• 제40권
• /
• pp.81-93
• /
• 1998

It is necessary to research shape of the breast of girls at adolescence for developing well-fit brassiers. 313 participants reside in Chonju and Kunsan were gathered for body measurement. The conclusion of this study can be summarized as follows. 1) The Analysis of Body Shape by Measurement. Comparing Age GroupⅠ(aged 10 to 12)' measurement with Age GroupⅡ(aged 13 to 15)', Each items has statistical significance. Two groups differed in the length, girth, depth, width items. 2) Factor Analysis of Body Measurement (1) Age GroupⅠ'characteristics were categorized Three Factor : Breast size and breast apex length. Breast volume, Length of the Breast part. (2) Age GroupⅡ' characteristics consist of four factors, which are named as breast size and its jut (first factor), breast volume (second factor), contour of breast profile & its jut (third factor), shoulder length (fourth factor). 3) Characteristics of Breast Shape. (1) Breast shapes of Age GroupⅠ are classified into three types. Types 1 is a protruded and more voluminous shape. Type 2 is the most voluminous and breast fatness is highest. Type 3 is the smallest and flat shape growing now. (2) Breast shapes of Age GroupⅡ are also classified into three types. Type 1 is the longest in length and middle in fatness, voluminous in size. Type 2 is the smallest in stature and the slimmest in fatness in breast shape. Type 3 is middle in length, the fattest and the most voluminous in breast.

• 복식문화연구
• /
• 제14권5호
• /
• pp.840-849
• /
• 2006

Breast volume has been approximately estimated under the assumption that the shape of breast is a corn. However, women's breast is more like a bulged bag in reality. In this paper, three methods of breast volume estimation were compared to find out the more accurate method. The shape of the breast is assumed as a hemisphere in the first estimation method and a corn in the second one. In the third method, arc along the cross sectional shape of breast was utilized in the calculation. Comparisons among the methods were made using the actual 3D volume measurement of thirty seven women's breast. As results, the third method was the best one for the normal breast type, especially for the lower part of the breast ($R^2=0.74$) which is the crucial design parameter of the brassiere. Assumption of the shape of breast as a corn was reasonably acceptable when the breast is sagged. It was expected that when women wore brassiere, the accuracy of the third method would increase more, since the shape of breast becomes more symmetrical.

• 대한가정학회지
• /
• 제39권2호
• /
• pp.25-40
• /
• 2001

The purpose of this study is to provide for the basic data useful to the development of the quality of brassiere featuring a good wearing feeling and an effect of reinstating and correcting breast shape. For this purpose, 220 adult women aged between 20 and 59 were sampled to survey their actual breast shapes. The results of this study can be summarized as follows; 1 According to the increase of age, the items of height were decreased and items of width, depth, circumference and length were increased, being obeser and breast point were drooped. So volume and bottom are3 of breast of 40.50′s women′s age group were larger than 20.30′s women′s age group and breast point width of 40.50′s women was being wider by increase of interior dimensions of breast. 2. The components of adult women′s breast shape can be categorized into "obesity of breast", "upper dimensions of breast and drop", "lower dimensions of breast and drop", "location of breast point and vertical size of breast", "interior dimensions of breast", "exterior dimensions of breast" Such components of breast shape very in terms of weight or apparence depending on ages. Older women tend to have more droopy and widen breasts.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.11-21
• /
• 2009

Recently, as custom-made demand about female underwear is increased, securing of a various dimension system is urgent, and satisfaction of each customer cannot be heightened with established dimensions. If we could measure shape of a living body with a fast and simple method, the custom-made demand of customers could be satisfied in the underwear as well as a clothing industry by using the method. One of the alternatives is shape measurement of the living body by a Moire fringe method. If we put a grating in front of an object to be measured and illuminate light, a Moire fringe with contour line shape is generated in the object, so we can conveniently measure object shape without touching directly by using the pattern. The Moire fringe and three-dimensional shape of the breast of the living body was acquired by a PMP method using a polygon mirror, and height and bottom width of the breast of the living body were measured by using obtained data in this study. Data of breast shape measurement through a mannequin was collected in a previous step as basic material for measuring the breast shape measurement of the living body. Three women in the twenties were selected as one of methods for measuring breast shape of a woman. As a result of the breast shape measurement of a living body A, it was measured that height of the breast was about 67.24mm and the bottom width was $13781.60mm^2$. This study is expected to contribute for collecting basic data of a female underwear industry and establishing a specification of a dimension system.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.1-12
• /
• 2020

It is essential to apply compression bands or pressure garments that can stabilize the breast implants and breast shape as well as help shape the breast to the desired shape immediately after breast augmentation surgery. It is necessary to study the compression garment which is able to properly cover a deformed breast due to the operation and shape it as a beautiful breast. The subjects of the study were 6 women who experienced breast augmentation surgery with an under bust size of 70 or 75, cup size of C cup with a hemispherical and conical shape. We analyzed the dissatisfaction and satisfaction factors through the evaluation of the 4 types of commercial compression garments and developed the new functional post-operative bra which can be worn immediately after the operation according to the breast characteristics of breast augmentation patients. We have developed new bra patterns; a front opening type garment with wings and a band type garment both sides that allow the band to be pressed from the front center. The comparative wearing evaluation indicated that the superiority of the new compression garments also provided a higher the satisfaction of the newly developed bra (front adjustable style) than a commercial band.

• 복식
• /
• 제64권4호
• /
• pp.106-117
• /
• 2014

The purpose of this study is to provide basic information for the development of well-fitting and comfortable brassieres for women in their 30s, based on the classification of breast shapes by utilizing 3D body measurement data of women in the age group. The result of processing the measurements from the 3D body scan data through RapidForm 2006 shows that while the vertical body measurements decrease, the horizontal measurements, which indicates the degree of obesity, increase proportionally with age. Also, the relevant measurements for upper breasts increase proportionally with age, while the measurements for lower part of the breasts decrease as the degree of sagging increases. Four composition factors of the breasts were identified through the factor analysis: Factor 1 is the level of volume in the breasts and the surrounding area; Factor 2 is the position of nipples and the shape of upper part of breasts; Factor 3 is the position and vertical length of the breasts; Factor 4 is the shape of lower part of breasts; and Factor 5 is the shape of inner part of breasts and degree of width between both breasts. The breasts have been categorized into three distinctive shapes: Breast Shape 1, Breast Shape 2 and Breast Shape 3. According to the results of the cluster analysis, the largest percentage (36.68%) of women in their 30s falls into the category of Breast Shape 2 with small volume and flat upper breasts, followed by Breast Shape 1 (32.66%) with large volume in the upper and lower parts of breasts, and large side to side area, and Breast Shape 3 (30.65%) with average volume and width between breasts.

• 한국컴퓨터정보학회논문지
• /
• 제25권5호
• /
• pp.137-146
• /
• 2020

20대 미혼 여성 182명의 직접 계측치를 이용한 유방유형 분류에 유방전체 형상 요인, 유방상부내측형상 요인, 유방볼륨 요인, 유방하부외측형상 요인 등 4가지 요인이 추출되었다. 군집분석을 통해 '상부발달 유방', '밋밋한 유방', '하부 발달 유방', '돌출한 유방' 등 4유형의 유방유형으로 분류하였다. 유방유형은 목앞점~젖꼭지점길이, 목옆점~젖꼭지점길이, 유방안쪽점 사이간격, 젖꼭지 간격, 유방아래직경, 유방내측깊이, 유방바깥쪽길이, 유방아래길이, 젖가슴가쪽점~젖가슴위쪽점길이, 젖가슴 밑 윤곽선길이 등 10개 항목으로 판별 가능하다.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.438-451
• /
• 1996

This study was performed to provide basic data for design of maternity brassiere. In order to find out transformation of breast size, shape and volume properties during the period of pregnancy, direct measurements of 306 subjects using Martin's anthropometer and indirect measurements using photography were conducted. And also breast surface area, volume and assumed weight using the molding of adhisive sheet are calculated. The results are as follows; 1) Size (breast widths, depths, girths and lengths) of the breast of pregnant woman are gradually increased during pregnancy. But underbust girth is decreased after delivery. 2) Front view of the breast is gradully dropped and widened. 3) Surface area, volume were measured for each stage of pregnancy, and weights of breasts were estimated. The surface area of breast of latter stage of prgnancy was increased 1.7 times comparing with the early stage. 4) Changes of bust girth, breast depth, underbust girth, volume and estimated breast weight during pregnancy should be considered for cup size, cup shape, width and strain of strap, and width of the wings.

• Archives of Plastic Surgery
• /
• 제36권6호
• /
• pp.755-760
• /
• 2009

Purpose: Breast surgeons usually insert tissue expander or implant beneath the subpectoral - subglandular dual plane in breast reconstruction. But sometimes it happens unsatisfactory lower pole fullness, asymmetric inframammary fold and breast shape because there is implant migration due to the pectoralis major muscle contraction and gravity. To solve all the problem like these, we introduce implant breast reconstruction using AlloDerm$^{(R)}$(LifeCell Corp., Branchburg, N.J.) sling. Methods: The AlloDerm$^{(R)}$ sling was used in 13 patients and 18 breasts for implant breast reconstruction. After mastectomy, costal and lower sternal insertion of pectoralis major muscle was detached. Rehydrated AlloDerm$^{(R)}$ was sutured to the chest wall and serratus anterior fascia at the level of inframammary fold downward and to lower border of the pectoralis major muscle upward like crescent shape with tension free technique after implant insertion into the subpectoral - subAlloDerm dual pocket. Results: We make satisfactory lower pole fullness, symmetric inframammary fold and breast shape. In conclusion, patients obtain relatively natural breast shape. There was no complication except one case of capsular contracture and one case of breast cellulitis. Conclusion: Implant breast reconstruction using AlloDerm$^{(R)}$ sling makes easy to get natural breast shape through satisfactory lower pole fullness, symmetric inframammary fold and implant positioning.