• 한국해양공학회지
• /
• 제9권1호
• /
• pp.101-110
• /
• 1995

In SMA(Shape Memory Alloy), the degradation by fatigue is one of the most important problems to be overcome, when SMA is used for robot-actuator materials. The actuator is operated repetitively for long time and its repeating operation develops the fatigue degradation of SMA. The fatigue degradation changes the transformation temperature and deformation behavior and results in inaccurate operation and deformation which results form repeating operation is to be investigated in advance and the scheme to resolve those problems have to be made for the design of actuator. In this paper, for the improvement of the fatigue degradation by repetive movement and better control of the correct movement by the stability of martensite transformation in the development of Robots actuator, Pre-strain(0, 1.5, 5, 8%) are loaded in the specimens and fatigue testing were carried out by the method of heating and cooling in direct condition. From the results of these experiments, the effect on pre-strain which affect the transformation characteristic and fatigue degradation phenomena were correctly investigated.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.562-567
• /
• 2016

비행속도와 조건에 따라 최적화된 형상을 갖는 모핑 날개는 작동기 기술, 구조 기계장치 기술, 유연 외피 재료, 제어법칙 기술 등 해결할 문제가 많다. 본 연구에서는 빠른 응답속도를 갖는 모핑 날개를 개발하기 위한 첫 단계로 형상기억합금 선을 작동기와 복원용 비틀림 스프링으로 구동되는 단일 플랩을 갖는 에어포일 설계하고 제작하였다. 제작된 모핑 에어포일의 작동실험을 통해 설계 개념의 타당성을 검증하였다. 실험을 통해 측정한 결과 원활한 작동과 매우 빠른 반응속도를 확인하였다.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.367-384
• /
• 2011

This paper presents the design and experimental evaluation of fast output sampling feedback controller to minimize structural vibration of a cantilever beam using Shape Memory Alloy (SMA) wires as control actuators and piezoceramics as sensor and disturbance actuator. Linear dynamic models of the smart cantilever beam are obtained using online recursive least square parameter estimation. A digital control system that consists of $Simulink^{TM}$ modeling software and dSPACE DS1104 controller board is used for identification and control. The effectiveness of the controller is shown through simulation and experimentation by exciting the structure at resonance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.72-75
• /
• 2000

This paper presents a simulation study on the description of the motion and the control of an active catheter actuator with multi-link structure actuated by Shape Memory Alloy(SMA). The model of an active catheter adopted in this paper has 3 links, and the individual links are composed of 3 micro coils of SMA for the omni-directional motion. In order to analyze the motions of multi-link structure, 3-dimensional kinematics description is presented. Also, the motion control of the end point of an active catheter using simple Neural Network is shown based on GUI(Graphic User Interface) system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.556-561
• /
• 2000

This paper deals with the control of an active bending actuator fur a catheter. The bending actuator with 40mm in length utilizes three zigzag SMA (shape memory alloy) springs which are equally located in the circumference between inner $({\phi}2.5 mm)$ and outer $({\phi}3.0mm)$ tube. It is purposed on realization of desired bending angle $(90^{\circ})$ and direction $(360^{\circ})$. It is also installed in front of the catheter and used to guide a path at extremely bent or branched blood vessel. The performance-analysis of the bending actuator are investigated fur the purpose of optimizing the control of the bending actuator. The analog joy stick is used to command a bending angle and direction for the fast and accurate response. According to the commands of the joy stick, tensile force of each SMA spring is computed and obtained by controlling the temperature of each SMA spring using PWM (pulse width modulation) of supplied electric power.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1071-1074
• /
• 1995

This paper proposes two directional bending actator using three link, two shape memory alloys(SMA) of coil-type springs and two guide wires. By the heating of two SMA springs sequentially, the bending and stretching of the actuator is possible. Bending angle, force and repeated bending motion of actuator were measured and characterized. The performance of the actuator has been characterized for the possible application for catheter.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.54-61
• /
• 1996

Because of its high energy density, the use of shape memory alloys(SMA) in designing microactuatiors is gaining much attention in recent years. Shape memory alloys can undergo a shape change at a low temperature with a small applied deformation force, and retain this deformation until they are heated, at which point they return to the original shape. This is called the shape memory effect(SME), and a plethora of alloys show this effect. Among them, TiNi-based alloys have relatively high electrical resistivity, which to develope helical-shape memory springs. These springs are used to develop fast protatonist/antagonist configuration actuators. The developed actuator has an actuation speed of 1 mm per 15 .approx. 20 ms and a minimum operating period of 2 sec.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.723-726
• /
• 2002

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dynamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However, the research of dynamic characteristics is very deficient. In this paper, the helical spring is fabricated with NiTi SMA wire of high resistivity The farce, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMA actuator is analyzed.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.15-22
• /
• 1999

This paper demonstrates the feasibility of Shape Memory Alloy (SMA) actuators in controlling the motion of micro active catheter. The dynamic behavior of SMA is obtained by several experiments for the design of the controller. With the control parameters obtained in experiments, temperature feedback control algorithm is proposed and realized. The prototype of micro active catheter is fabricated, and its control performance which uses the designed controller is investigated. The results obtained show the potential of the SMA as viable means for actuating the micro active catheter.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1083-1089
• /
• 2010

형상기억합금은 지능형 재료와 구조물에 널리 쓰인다. 큰 힘과 변위를 발생시키는 것이 특징이며 작동기, 소음 및 진동감쇠, 동역학적 튜닝, 형상의 변형 제어 등의 다양한 분야에 응용될 수 있다. 본 논문에 서는 형상기억합금튜브와 초탄성 스프링으로 구성된 형상기억합금 비틀림 작동기를 제안하였고 각각의 거동 특성을 알아보았다. 열전달 해석을 통해 저항열과 히터의 열을 동시에 형상기억합금튜브에 가하면 작동기의 성능을 더 향상시킬 수 있음을 확인하였다. 접촉 해석으로는 실제 작동기의 거동을 시뮬레이션하였고 정상적으로 작동함을 알 수 있었다. 3 차원 형상기억합금의 거동을 표현하기 위해 비선형 구성방정식을 유한요소 법으로 풀고 ABAQUS 의 U-MAT 기능을 이용하여 비선형 해석을 수행하였다.