• 천문학회지
• /
• 제29권spc1호
• /
• pp.63-64
• /
• 1996

The nature of distant faint blue field galaxies remains a mystery, despite the fact that much attention has been devoted to this subject in the last decade. Galaxy counts, particularly those in the optical and near ultraviolet bandpasses, have been demonstrated to be well in excess of those expected in the 'no-evolution' scenario. This has usually been taken to imply that galaxies were brighter in the past, presumably due to a higher rate of star formation. More recently, redshift surveys of galaxies as faint as B$\~$24 have shown that the mean redshift of faint blue galaxies is lower than that predicted by standard evolutionary models (de-signed to fit the galaxy counts). The galaxy number count data and redshift data suggest that evolutionary effects are most prominent at the faint end of the galaxy luminosity function. While these data constrain the form of evolution of the overall luminosity function, they do not constrain evolution in individual galaxies. We are carrying out a series of observations as part of a long-term program aimed at a better understanding of the nature and amount of luminosity evolution in individual galaxies. Our study uses the luminosity-linewidth relation (Tully-Fisher relation) for disk galaxies as a tool to study luminosity evolution. Several studies of a related nature are being carried out by other groups. A specific experiment to test a 'no-evolution' hypothesis is presented here. We have used the AUTOFIB multifibre spectro-graph on the 4-metre Anglo-Australian Telescope (AAT) and the Rutgers Fabry-Perot imager on the Cerro Tolalo lnteramerican Observatory (CTIO) 4-metre tele-scope to measure the internal kinematics of a representative sample of faint blue field galaxies in the red-shift range z = 0.15-0.4. The emission line profiles of [OII] and [OIII] in a typical sample galaxy are significantly broader than the instrumental resolution (100-120 km $s^{-l}$), and it is possible to make a reliable de-termination of the linewidth. Detailed and realistic simulations based on the properties of nearby, low-luminosity spirals are used to convert the measured linewidth into an estimate of the characteristic rotation speed, making statistical corrections for the effects of inclination, non-uniform distribution of ionized gas, rotation curve shape, finite fibre aperture, etc.. The (corrected) mean characteristic rotation speed for our distant galaxy sample is compared to the mean rotation speed of local galaxies of comparable blue luminosity and colour. The typical galaxy in our distant sample has a B-band luminosity of about 0.25 L$\ast$ and a colour that corresponds to the Sb-Sd/Im range of Hub-ble types. Details of the AUTOFIB fibre spectroscopic study are described by Rix et al. (1996). Follow-up deep near infrared imaging with the 10-metre Keck tele-scope+ NIRC combination and high angular resolution imaging with the Hubble Space Telescope's WFPC2 are being used to determine the structural and orientation parameters of galaxies on an individual basis. This information is being combined with the spatially resolved CTIO Fabry-Perot data to study the internal kinematics of distant galaxies (Ing et al. 1996). The two main questions addressed by these (preliminary studies) are: 1. Do galaxies of a given luminosity and colour have the same characteristic rotation speed in the distant and local Universe? The distant galaxies in our AUTOFIB sample have a mean characteristic rotation speed of $\~$70 km $s^{-l}$ after correction for measurement bias (Fig. 1); this is inconsistent with the characteristic rotation speed of local galaxies of comparable photometric proper-ties (105 km $s^{-l}$) at the > $99\%$ significance level (Fig. 2). A straightforward explanation for this discrepancy is that faint blue galaxies were about 1-1.5 mag brighter (in the B band) at z $\~$ 0.25 than their present-day counterparts. 2. What is the nature of the internal kinematics of faint field galaxies? The linewidths of these faint galaxies appear to be dominated by the global disk rotation. The larger galaxies in our sample are about 2"-.5" in diameter so one can get direct insight into the nature of their internal velocity field from the $\~$ I" seeing CTIO Fabry-Perot data. A montage of Fabry-Perot data is shown in Fig. 3. The linewidths are too large (by. $5\sigma$) to be caused by turbulence in giant HII regions.

• 한국작물학회지
• /
• 제4권1호
• /
• pp.93-95
• /
• 1968

대두의 엽면적은 수량과 높은 상관관계가 있고 그의 간이측정법은 매우 의의 깊은 일이므로 포장에서 생체대로엽면적을 측정할 수 있도록 간이측정법을 고안하였다. 대두의 3개품종 감안, 동산 006, patten을 재료로 절위별로, 규소엽과 측소엽별로 엽면적과 엽장, 최대엽폭과의 관계를 조사, 실험하였으며 총공시엽수는 2246매이었다. 대두의 규소엽의 면적은 (엽장${\times}$ 최대엽폭)${\times}$0.658, 측소엽의 면적은 (엽장 ${\times}$ 최대엽폭)${\times}$ 0.683에 의해서 구할수 있음을 알았다. 즉, 규소엽장에 최대엽폭을 곱한 적에 수수 0.683를 곱합음로써 전처리구에서 planimeter에 의한 엽면적과 높은 상관관계를 보였고 이때의 상관계수 r의 평균은 0.994이었다. 그리고 측소엽장에 최대엽폭을 곱한 적에 계수 0.683을 곱함으로써 전처리구에서 planimeter에 의하여 구한 엽면적과 높은 상관관계를 보이고 또한 상관계수 r의 평균은 0.996이였다. 이방법에 의하면 시간과 노력을 크게 절감시킬수 있을 뿐만아니라 생체대로 쉽게 엽면적을 구할수 있는 이점이 있다.

• 자원환경지질
• /
• 제34권1호
• /
• pp.133-146
• /
• 2001

옥천대 중부 충주-수안보 일원에 분포하는 황강리층을 대상으로 대자율 비등방성을 측정하고 야외 지질구조 자료들을 수입하였다. 그 결과, 연구지역의 북동부와 남서부 지역은 변성과 변형사가 서로 달랐음이 드러났다. 황강리층에는 야외에서 구별되는 두 종류의 벽개, 즉 점판벽개($S_1$)와 파랑벽개($S_2$)가 발달하고 있으나 $S_1$면은 연구지역의 북동부에서 뚜렷이 관찰되는 반면, 남서부에서는 $S_2$면의 발달이 절대적으로 우세하다. 등온잔류자기 강도, 제적 총 대자율 그리고 비등방성의 정도는 모두 남서부에 비해 북동부 지역에서 훨씬 높은 값을 보이고 있으며 남서쪽으로 갈수록 이들 값들이 현저히 감소하여 남서부 지역에 이르러서는 일관되게 매우 낮은 값을 보여준다. 또한, 대자율 비등방체의 형태도 북동부 지역에서 자기적 엽리구조가 우세하며 남서쪽으로 갈수록 선구조 영역으로 점진적으로 변화되어 남서부 지역에 이르러서는 일관되게 구에 가까운 형태를 이룬다. 이러한 사실들은 모두 북동부에 비해 남서부에서 보다 강한 후기 변성과 변형이 있었음을 지시하는 것이다. 한편, 북동부 지역에서 얻어진 대자율 비등방 타원체의 주축들($k_1$, $k_2$, $k_3$)의 분포 양상을 근거하면, 연구지역 황강리층은 세 번의 변형사건($D_1$, $D_2$, $D_3$)을 겪은 것으로 해석된다. 북서-남동방향의 압축력에 의해서 북동-남서방향의 $S_1$면이 형성되고 이 엽리면을 따라 순수 전단작용이 발생하여 황강리층을 편평화시킨 동축 변형사건($D_1$)이 제일 먼저 있었으며, 이후 $S_2$면을 따라 북서향의 충상단층과 좌수향의 연성 혹은 준 연성의 단순 전단작용이 일어나 기존의 변형타원체의 주축들이 차별적으로 회전되는 비동축 변형사건($D_2$)이 있었고, 마지막으로는 북동방향의 수평축을 가진 요굴습곡을 형성시킨 변형사건($D_3$)이 있었다. 남서부 지역에서는 비등방 타원체의 모든 주축들이 분산되어 있으며 야외에서 $S_2$면이 우세하게 관찰되고 북동부에 비해 IRM강도, 체적 총대자율 그리고 대자율 비등방성 정도 등이 한결같이 매우 낮다. 이러한 점들은 북동부에 비해 강한 후기 변형 혹은 변성 과정에서 자성광물의 배열이 분산되었거나 강한 $D_2$변형으로 $D_1$변형타원체가 중첩되어 역변형된 결과이거나 혹은 이 두가지가 복합된 결과로 해석된다.

• 한국식품영양과학회지
• /
• 제46권9호
• /
• pp.1106-1113
• /
• 2017

본 연구에서는 튀긴 약과(FY) 및 구운 약과(BY)의 자소엽 분말의 첨가 비율을 달리하여 약과를 제조하고 이화학적 품질 특성을 분석하였다. 수분함량은 튀긴 약과 7.05%, 자소엽 분말 첨가량에 따른 구운 약과가 12.42~10.44%로 튀긴 약과보다 구운 약과 및 자소엽 분말 첨가군이 높게 나타났으며, 자소엽 분말 함량에 비례하여 수분함량이 감소하는 경향을 나타냈다. 이는 튀기는 과정 중 약과 내 수분이 유실된 것으로 판단되며 구운 약과가 튀긴 약과보다 팽화율은 낮지만, 일정한 크기와 형태를 유지하여 튀긴 약과의 단점을 해소하며 동시에 쿠키 타입의 약과 제조에 적합할 것으로 판단된다. 조지방의 경우 튀긴 약과가 구운 약과보다 지방 성분이 높았으며, 이는 튀기는 과정에서 수분과 유지의 교환반응이 진행되기 때문으로 판단된다. 약과 열량의 경우 튀기는 조리법을 사용한 FY 시료는 501 kcal로, 오븐에 굽는 조리법을 사용하는 BY 시료군들에 비해서 약 65.8 kcal 정도 높은 것을 확인할 수 있었으며, 이는 기름에 튀기는 조리법과 오븐에서 굽는 조리법에 따른 조지방의 함량 차이가 크게 영향을 미친 것으로 판단된다. 약과의 색도는 튀긴 약과보다 구운 약과의 L값은 높게 나타났고 a, b값이 낮게 나타났으며, 이는 자소엽 분말 함량이 증가함에 따라 L, a, b값은 모두 감소하였다. 조직감의 경우 자소엽 분말의 첨가량에 비례하여 약과의 경도, 응집성, 씹힘성, 검성은 증가하였으나 탄력성은 감소하였다. 약과의 DPPH 라디칼 소거 활성은 BY 0.2~0.4% 시료군이 FY와 BY 0~0.1%에 비해 높게 나타났고, 자소엽 분말 첨가량이 증가할수록 항산화 활성도 증가하였다. 따라서 구운 약과 제조 시 자소엽 분말을 0.2% 이상 첨가하였을 때 항산화 효과가 증진함을 알 수 있었다. 관능평가에서 맛, 전반적인 기호도 평가에서는 BY 0.1% 시료가 가장 선호도가 높은 것으로 나타났고 향과 색에서는 BY 0% 시료의 선호도가 가장 높게 나타났다. 이상의 결과를 통하여 자소엽은 항산화 활성이 우수한 소재로 자소엽 분말을 첨가하여 구운 약과를 제조할 경우 열량 및 지방 감소, 항산화 활성 증가 효과를 알 수 있었고, 또한 구운 약과는 기존 튀긴 약과에 비해 경도 값이 쿠키 경도와 비슷하여 차후 약과 제품 유통 시 형태 보존에 대한 안전성 유지에 도움을 줄 것이다. 더불어 기존 튀긴 약과의 상품성, 맛과 품질을 개선해야 할 필요성을 인식할 기회를 제공하며 한국의 대표 디저트에 부합하는 약과 제조 방법 정립에 중요한 자료가 될 것이다.

• 자원환경지질
• /
• 제12권2호
• /
• pp.95-104
• /
• 1979

The position of any point on the earth's surface can be. represented in the spherical coordinates by surface spherical harmonics. Since geomagnetic field is a function of position on the earth, it can be also expressed by spherical harmonic analysis as spherical harmonics of trigonometric series of $a_m({\theta})$ cos $m{\phi}$ and $b_m({\theta})$ sin $m{\phi}$. Coefficients of surface spherical harmonics, $a_m({\theta})$ and $b_m({\theta})$, can be drawn from the components of the geomagnetic field, declination and inclination, and vice versa. In this paper, components of geomagnetic field, declination and inclination in the Korean peninsula are obtained by spherical harmonic analysis using the Gauss coefficients calculated from the world-wide magnetic charts of 1960. These components correspond to the values of normal geomagnetic field having no disturbances of subsurface mass, structure, and so on. The vertical and total components offer the zero level for the interpretation of geomagnetic data obtained by magnetic measurement in the Korean peninsula. Using this zero level, magnetic anomaly map is obtained from the data of airborne magnetic. prospecting carried out during 1958 to 1960. The conclusions of this study are as follows; (1) The intensity of horizontal component of normal geomagnetic field in Korean peninsula ranges from $2{\times}10^4$ gammas to $2.45{\times}10^4$ gammas. It decreases about 500 with the increment of $1^{\circ}$ in latitude. Along the same. latitude, it increases 250 gammas with the increment of $1^{\circ}$ in longitude. (2) Intensity of vertical component ranges from $3.85{\times}10^4$ gammas to $5.15{\times}10^4$ gammas. It increases. about 1000 gammas with the increment of $1^{\circ}$ in latitude. Along the same latitude, it decreases. 150~240 gammas with the increment of $1^{\circ}$ in longitude. Decreasing rate is considerably larger in higher latitude than in lower latitude. (3) Total intensity ranges from $4.55{\times}10^4$ gammas to $5.15{\times}10^4$ gammas. It increases 600~700 gammas with the increament of $1^{\circ}$ in latitude. Along the same latitude, it decreases 10~90 gammas. with the increment of $1^{\circ}$ in longitude. Decreasing rate is considerably larger in higher latitude as the case of vertical component. (4) The declination ranges from $-3.8^{\circ}$ to $-11.5^{\circ}$. It increases $0.6^{\circ}$ with the increment of $1^{\circ}$ in latitude. Along the same latutude, it increases $0.6^{\circ}$ with the increment of l O in longitude. Unlike the cases of vertical and total component, the rate of change is considerably larger in lower latitude than in higher latitude. (5) The inclination ranges from $57.8^{\circ}$ to $66.8^{\circ}$. It increases about $1^{\circ}$ with 'the increment of $1^{\circ}$ in latitude Along the same latitude, it dereases $0.4^{\circ}$ with the increment of $1^{\circ}$ in longitude. (6) The Boundaries of 5 anomaly zones classified on the basis of the trend and shape of anomaly curves correspond to the geologic boundaries. (7) The trend of anomaly curves in each anomaly zone is closely related to the geologic structure developed in the corresponding zone. That is, it relates to the fault in the 3rd zone, the intrusion. of granite in the 1st and 5th zones, and mountains in the 2nd and 4th zones.

• Journal of Animal Science and Technology
• /
• 제44권6호
• /
• pp.643-652
• /
• 2002

1997년부터 2001년까지 (사)한국종축개량협회의 전국한우능력평가대회에 출품된 642두의 거세한우의 도축 전까지 4회에 걸쳐 주요 10개 부위의 체형 측정치를 조사하여 주성분 분석을 이용하여 체형을 분류하였으며, 각 체형 측정치의 주성분 지수와 도체 형질과의 상관관계를 분석하였으며, 그 결과를 요약하면 다음과 같다. 1. 1차, 2차, 3차 및 4차 체형 측정치의 principal component(이하 P.C) 1의 분산은 각각 7.610, 8.297, 7.269 및 5.739로서 전체분산 중 76.0%, 83.0%, 72.7% 및 57.4%를 나타낼 수 있었고, P.C 1, P.C 2, P.C 3의 합은 전체분산 중 각각 86.69%, 90.49%, 84.62% 및 77.26%를 나타났다. 2. 각 차수별 체형 측정치의 P.C 1의 모든 계수가 양(+)이어서 일반적으로 좋은 체구의 크기를 나타내었으며, 체구의 크기에 가장 크게 영향을 미치는 형질은 흉심(0.328${\sim}$0.339)과 요각폭(0.325${\sim}$0.341)이였다. 또한 P.C 2, P.C 3 및 P.C 4는 각 차수별로 다양하게 나타났다. 3. 1차, 2차, 3차 및 4차 체형 측정치의 주성분 지수들과 도체형질간의 상관계수 추정에서 대부분의 분산을 차지하는 P.C 1은 도체중(0.539${\sim}$0.755), 일당증체량(0.256${\sim}$0.564), 등지방두께(0.227${\sim}$0.280) 및 배최장근단면적(0.187 ${\sim}$0.344)간에 정(+)의 상관을 보였으며, 육량지수(－0.246${\sim}$－0.110)와는 부(－)의 상관을 보였고, 근내지방도(0.066${\sim}$0.099)와는 대부분 유의적인 상관을 보이지 않거나 낮은 상관을 보였고, P.C 2, P.C 3 및 P.C 4는 주성분 지수들의 값에 따라 도체형질과 다양한 상관관계를 보였다. 단일 체형형질과 도체형질간의 상관 그리고 P.C 1의 주성분 지수와 도체 형질과의 상관간에는 큰 차이가 없었다.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• 한국직업건강간호학회지
• /
• 제4권호
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.398-408
• /
• 2006

본 연구의 목적은 MTT 검색법을 이용하여 흰쥐 상악 대구치를 발거한 후 실온의 건조 상태에서의 시간 변화에 따른 쥐 치아 치근면의 치주인대 세포 활성도를 측정함과 동시에 냉동 절단법을 이용한 조직학적인 관찰 결과를 토대로 하여 MTT 검색법이 유용한지를 검증하고자 하였다. 생후 4주된 암컷 Sprague-Dawley계 흰쥐 80마리를 이용하여 ${\beta}$-APN 전처치 후 상악 제 1 & 2대구치를 모두 발거하였다. 이들 치아를 즉시 혹은 10, 20, 40, 60분 동안 실온에서 건조시킨 후 치아 자체를 MTT용액에 저장한 다음 흡광도 측정을 이용한 정량적 분석과 동시에 냉동 절단법을 이용하여 조직을 관찰하였다. MTT 검색에 의한 흡광도 값에 있어 즉시 처치군과 10분 건조군 사이에는 통계학적인 유의차가 없었다 (p > 0.05). 그러나, 즉시 처치군 및 10분 건조군은 20분과 40분 및 60분 건조군과 비교시 통계학적인 유의차를 보였다 (p <0.05). 또한, 20분 건조군도 40분 및 60분 건조군과의 군간 비교에서 각각 통계학적인 유의차를 보였다 (p<0.05). 그러나, 40분 건조군과 60분 건조군 사이에는 통계학적인 유의차를 보이지 않았다. 조직학적 관찰에서 시간경과에 따라 crystal의 모양과 분포 및 수에서 확연히 구별되는 특징적인 양상을 보여주었다. 즉시 및 10분 건조 군에서는 가시모양의 crystal이 전치주인대 부위 조직과 치수 내에 밀도 높게 골고루 폭넓게 퍼져 있었으나 20분 이상 건조 군에서부터는 치주인대와 치수 부위 조직 모두에서 crystal 결정체 수가 급격히 감소하는 양상을 보였다. 이번 실험의 결과를 종합적으로 분석해보면 MTT 흡광도 측정값과 냉동 절단법을 이용한 시편의 MTT 염색 관찰 소견 결과를 서로 비교했을 때 상당히 밀접한 상관 관계가 있음을 보였다.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.