• Applied Microscopy
• /
• v.24 no.4
• /
• pp.98-106
• /
• 1994

The corneal formation of compound eye of Pieris rapae L., which was mostly made during pupal stage, was morphologically investigated with light microscope, scanning electron microscope and transmission electron microscope. The regeneration of the microvilli were found on the surface membranes of corneagen cells and retinular pigment cells of preommatidium after apolysis pupal cuticle. The microvilli were finally differentiated to corneal nipples of the ommatidium. The corneal cuticle was generated on the superficial layer of the preommatidium from corneagen cells and retinular pigment cells. The corneal process was also formed under the cuticular layer from the corneagen cells. The pore canal was appeared within the cuticular layer and connected with the retinular pigment cell as if the root of interommatidial hair was connected. The interommatidial hair was projected randomly among the ommatidial facets and cornal nipple was arrayed regular on the ommatidial facets. The cornea was convex lens and the refracting power by its convex shape was 4 diopter.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.315-319
• /
• 1999

This paper has been considered on the cutting characteristics such as chip formation and surface roughness for Inconel 690 alloy with difficult-to-cut because of high toughness and strength. We have made efforts solving the problem to difficult-to-cut of Inconel by improvement of tool with TiN coating and the selection of optimum cutting condition. We used the CCD camera and the surface roughness tester to observe the chip formation and the state of machined surface by using the improved tool with diamond coating and various cutting condions. We have found that the chip formation showed the tooth shape of tooth blade and the surface roughness was very poor. but it can be better by selection of optimum cutting condition.

• Journal of Welding and Joining
• /
• v.19 no.3
• /
• pp.317-324
• /
• 2001

This study deals with high power Nd:YAG laser welding of thin steels for small pressure vessels. Full penetration welding at the overlap joint was performed so as to assure sufficient weld strength. Results showed that mid-depth weld size reduced drastically with increasing the travel speed. Position of focus had little effect on the bead formation even though short focal system was used. However, the shape factor and the bead width had closely related with the position of focus. Based on the microstructural inspection, acceptable weld was obtained when the overlap clearance was controlled up to 20% of the base metal thickness. In the case that the joint contained more clearance than the critical value, both the tensile shear strength and the tear strength were reduced. Results also demonstrated that shielding gases were proved to play a key role as far as the bead formation characteristics was taken into consideration. Blowing dry air through 5mm in diameter nozzle produced narrower bead cross-section than that of argon or nitrogen shielding.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.473-478
• /
• 2012

In this paper, the air bubble formation mechanism in the rectangular and triangular line-and-space pattern during dispensing UV Nanoimprint Lithography (UV-NIL) at an atmospheric condition is studied. To investigate the air bubble formation, an analytic model based on geometric approach and a numerical model based on CFD(computational fluid dynamics) were used in the analysis. It was found in the numerical analysis that every time the flow front passed through a corner of the pattern, it proceeded with a newly formed shape, occurring due to interface reconfiguration, since the flow fronts were formed such that they minimized the surface energy. Moreover, the conditions for the air bubble formation were investigated by applying the analytic analysis based on geometric approach and the numerical analysis. Good overall agreement was found between the analytic and numerical analysis.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.24-30
• /
• 2003

An experimental study was performed to investigate the influence factors of drop formation in electrohydrodynamic atomization. The mode of electrohydrodynamic atomization depended on the various factors such as the flow rate of the liquid, the inner diameter of the nozzle, the distance between the nozzle tip and the ground electrode, the shape of the ground electrode. and the applied high voltage. This work was performed to investigate the experimental analysis for the flow pattern visualization of droplets, and the relationship between voltage application and the behavior of liquid atomization. Uniform drops of different sizes can be obtained at the inception of the spindle mode by charging the flow rate and the electric field. The drop size also decreased when the flow rate was raised for the spindle mode. The whipping motion occurred beyond 7kV and before the corona started to take effect.

• Archives of Craniofacial Surgery
• /
• v.11 no.1
• /
• pp.19-22
• /
• 2010

The author presents a new method for the formation of Cupid's bow and the vermilion tubercle by using the inferior-based lip skin flap in a secondary bilateral cleft lip deformity. The length of the flap includes the entire length of the previous upper lip scar. Both skin flaps are elevated and turned down toward the central part of the vermilion. The distant portion of the turned-down skin flaps are deepithelialized and trimmed according to the new shape of Cupid's bow. The deepithelialized portions of both flaps are buried under the central vermilion mucosa in order to create the vermilion tubercle. The advantages of the proposed procedure are; provision of a more natural shape of Cupid's bow, the lip length is increased, and the vermilion tubercle can be reconstructed at the same time. Therefore, this technique is best suited for a case of a bilateral absence of Cupid's bow combined with a short lip in a sufficient upper lip of a bilateral cleft lip deformity. The proposed procedure, however, should be avoided in the tight upper lip because of a great deal of tension on the donor.

• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.174-181
• /
• 2002

Nanosized tungsten carbide powders were synthesized by the chemical vapor condensation(CVC) process using the pyrolysis of tungsten hexacarbonyl($W(CO)_6$). The effect of CVC parameters on the formation and the microstructural change of as-prepared powders were studied by XRD, BET and TEM. The loosely agglomerated nanosized tungsten-carbide($WC_{1-x}$) particles having the smooth rounded tetragonal shape could be obtained below $1000^{\circ}C$ in argon and air atmosphere respectively. The grain size of powders was decreased from 53 nm to 28 nm with increasing reaction temperature. The increase of particle size with reaction temperature represented that the condensation of precursor vapor dominated the powder formation in CVC reactor. The powder prepared at $1000^{\circ}C$ was consisted of the pure W and cubic tungsten-carbide ($WC_{1-x}$), and their surfaces had irregular shape because the pure W was formed on the $WC_{1-x}$ powders. The $WC_{1-x}$ and W powders having the average particles size of about 5 nm were produced in vacuum.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2018

Electrospinning is a versatile technique that utilizes electrostatic forces to produce very thin and fine fibers of polymer ranging from submicron to nanometer scale. The technique can be applied to fibers of a various polymer types. Working parameters in the electrospinning are very important to understand not only the nature of electrospinning but also the conversion of polymer solutions into nanofibers through electrospinning. Those parameters in the electrospinning can be broadly divided into three parts. The first parameter is solution parameters such as molecular weight of polymer, concentration, viscosity, surface tension and conductivity/surface charge density of solution. The second parameter is process such as voltage, distance between the collector and the tip of the syringe, shape of collectors, flow rate. The third parameter is ambient parameters such as humidity and temperature. Fibers which made by electrospinning with working parameters are applied for various fields according to shape such as medical, cloth, photodiode, a sensor technology, catalyst, filtration, battery etc.

• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.1
• /
• pp.51-59
• /
• 1982

This experiment was conducted to investigate the effects of fertilization level, additional dressing time and form of nitrogen on the growth and formation of Alkaloid in flue-cured tobacco. The results are abstracted as follows. Length and width of harvested leaves, area of a leaf, leaf area per plant, number of harvested leaves, weight of a leaf, and leaf weight of a plant were larger in the $NO_3$-N plot than $NH_4$-N plot. Length, width and area of the middle leaves increased by additional dressing on 7 days before topping, but the dry weight Per unit leaf area of those was decreased. Leaf shape was broaden in additional dressing plots in comparison with 100% of basal dressing plot, but there is no difference among the additional dressing plots. And the smallest leaf shape index was shown at upper leaves in 100% of basal dressing Plot. Leaf weight of a Plaint was the highest in 12kg/10a Plot among $NO_3$-N form and in 12kg/10a plot among $NH_4$-N form. Total Alkaloid content was higher in $NH_4$-N plot between fertilization forms, and highest in 15kg/10a plot among fertilization levels and at the position of middle and upper leaves in the plot of 7 days before topping among additional dressing times.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1208-1212
• /
• 2003

CaCO$_3$ powders were synthesized by aqueous solution reaction of CaC1$_2$ㆍ2$H_2O$-(NH$_4$)$_2$CO$_3$ system with NH$_4$OH at 45$^{\circ}C$ and pHs 8, 9, 10, and 11 and in the concentration range of 0.1∼5 M and its polymorphism, morphology and size were investigated. In order to investigate the influence of pH on nucleation, pH was adjusted before and after reaction respectively. When pH was adjusted after reaction a formation ratio of vaterite was increased with increasing pH and concentration but vaterite was formed with calcite. But, when pH was adjusted before reaction, the formation rate of vaterite was increased with increasing pH and concentration. resulting in a phase-pure vaterite with a spherical shape and 2∼5 $\mu\textrm{m}$ in size. It was found that solubility of alkaline vaterite was decreased with increasing OH- ions in the high pH solution. When pH was adjusted before nucleation in the high concentration range, in particular, decreasing of solubility disturbed transformation of initially formed numerous vaterite to calcite.