• 교육녹색환경연구
• /
• 제9권1호
• /
• pp.32-40
• /
• 2010

The purpose of this study was to evaluate structural safety and economic efficiency of prestressed hybrid beam using T-shape steel member which was developed to build large span educational facilities. Hybrid beam specimens were manufactured with 16.0m long and load was uniformly distributed by 12.0kN steel hexahedrons. In this study, honeycomb beam design process was introduced to T-shape section steel beam design. Vibration condition of specimens were analyzed by Korea Building Code 2009 and AISC Steel Design Guide Series-11. As a result, the prestressed hybrid beam with T-shape steel member has about 10.4% of cost reduction effect.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1141-1148
• /
• 1997

In the stamping industry the blank shape to be stamped into a designed shape has been conventionally determined from the try out process by the press engineers. The work needs a lot of time and thus leads a loss of productivity. In this study boundary element method for 2-dimensional potential problem was used to design optimum blank shapes for irregular press forming. Here we assumed that the blank is controlled by blank holder only and material flow at blank holder was under potential flow. The developed PC code for designing the optimum blank shape shows that the blank shapes for optimal drawing can be calculated within a few minute in pentium PC and the calculated shapes agree well with the experiments. However the application of this method is constrained only to the pressed product with flat bottom.

• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.34-40
• /
• 1999

Drag reduction on vehicles are the main concern for the body shape designers in order to lower the fuel consumption rate and to aid the driving stability. The drag of bluff bodies like transportation vehicles is mostly pressure drag due to the flow separation, which can be minimized by controlling the location and size of the separation bubble. In the present study, the TURBO-3D code is incorporated with optimal algorithm based on analytical approximation method to obtain an optimal afterbody shape of the MIRA Model corresponding to the lowest drag coefficient. For this purpose three mutually independent afterbody angles are chosen as design variables, while the drag coefficient is chosen as an objective function. It is demonstrated in the present study that an optimal body shape having the lowest drag coefficient which is about 6% lower than that of the original shape has been successfully obtained within number of iterations of tile optimal design loop.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.82-85
• /
• 2000

In cold forging, the final product is usually given by multi-stage process and the preform with stepped shape can be manufactured through the various forging method. The forward extrusion and upsetting processes for preform with stepped shape have been analyzed by using the rigid-plastic finite element analysis code, InteFORM and compared for load and stroke according to ae reduction of weを An engineer should select the proper processes considering the capacity and the stroke of the corresponding press in the forging of the preform with stepped shape.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.101-107
• /
• 2005

The objective of this study is structural analysis and optimum shape of rope brake. The finite element model was implemented to compute the stress, strain and friction force for rope brake. The ANSYS code was used for this analysis. Structural analysis are effected by position and height of reinforcement figure. The structural safety was examined by an establishment angle of the rope brakes which made apply to housing of the most suitable shape. The optimum shape of the rope brake was decided after stress and strain results were compared and examined.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.67-74
• /
• 1998

Reducing drag of vehicles are the main concern for the body shape designers in order to lower fuel consumption rate and to aid the driving stability. The drag of bluff bodies like transportation vehicles is mostly pressure drag due to the flow separation, which can minimized by controlling the location and size of the separation bubble. In the present study, the TURBO-3D code is incorporated with optimal algorithm based on analytical approximation method to obtain optimal afterbody shape of the MIRA Model corresponding to the lowest drag coefficient. For this purpose three mutually independent afterbody angles are chosen as design variables, while the drag coefficient is chosen as an objective function. It is demonstrated in the present study that an optimal body shape having lowest drag coefficient which is about $6\%$ lower than that of the original shape has been successfully obtained within number of iterations of the optimal design loop.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.111-116
• /
• 2001

A practical scheme to reduce failure of the PCB(Printed Circuit Board) of a monitor is introduced using deformed mode shape under mechanical shock. When the monitor is given critical shock loads, cracks are commonly initiated at the tip of a hole on the PCB. Accordingly, a deformed mode shape of the PCB is obtained using a FEM code to define a weak point on the PCB under mechanical shock, and then the position and direction of the hole is determined to prevent the failure at the critical mode shape. Also, the stress intensity factor around the weak point on the PCB is calculated to check the possibility of fracture by normal tensile stress. In conclusion, present research is useful to assist the practical design of components-layout on the PCB.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.121-125
• /
• 2004

대부분의 수기 숫자 인식 시스템에서는 자모 형태를 이용한 특징 점 추출과, 형태소 적 분석기법을 많이 사용하였다. 본 연구에서는 체인코드를 사용하고, 생성된 체인코드를 미분하여 최소 값이 되는 미분코드를 만들었다. 이 미분코드는 대부분의 수기 숫자에 적용해 본 결과 숫자 변별력이 매우 뛰어남을 알 수 있었다. 처리 순서는 몇 개의 수기숫자를 전 처리하고, 체인코드와 미분코드를 생성 한 후, HMM 인식 네트워크를 사용하여 숫자 인식하였다. 처리 결과 96.1%의 수기숫자를 인식하였으며, 매우 심하게 왜곡된 숫자는 인식하지 못하였다.

• 한국해양공학회지
• /
• 제21권5호
• /
• pp.55-60
• /
• 2007

Bellows are mechanical components which prevent the damage of system by absorption of the vibration and the displacement of axle and radial direction. Thermal piping system is expanded by the fluid of the high temperature from the heat engine inside. At this time, bellows prevent the damage of the piping due to the thermal expansion. Recently, design of bellows is required to fit some other operational environments which are not suggested in the E.J.M.A code book. And it is difficult to produce and to maintain bellows of high temperature and high pressure bemuse of its complicated shape and this causes the manufacturing cost to rise. The objective of this study is to determine optimum shape of bellows which can endure in the high temperature and high pressure. The maximum stress has an effect on the fatigue life of bellows, therefore it needs to be minimized. This study attempts to find a shape which minimizes the stress occurring in the bellows by the design of experiment. The model used in this study is not presented in the E.J.M.A code book, therefore, from the result of design of experiment we find the factors which give effects on the characteristic value and we presents the recession model using the RSM, which can predict the characteristic values depending on the change of factor values.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.41-53
• /
• 2009

조립재료의 입자 형상이 입자 파쇄 전개 및 전단 거동 특성에 미치는 영향을 분석하기 위하여, 개별요소법(DEM, discrete element method)을 이용하여 직접전단시험을 수치해석적으로 모델링하였다. PFC(Particle Flow Code)내의 clump 모델 및 cluster 모델을 이용하여 6가지 형상의 입자를 생성하여 이를 원형입자의 직접 전단거동과 비교 분석함으로써 입자형상의 영향을 연구하였다. 연구결과, PFC에 의해 모델링된 직접 전단모델의 수치해석 결과는 실내 실험결과와 잘 일치하였으며, 따라서 본 연구 결과의 타당성을 입증하였다. 입자 형상 관점에서 모나고 거친 입자의 내부마찰각이 상대적으로 둥글고 매끄러운 입자에 비해 큰 값을 나타냈으며, 입자 파쇄 또한 많이 발생하는 것을 확인하였다. 이때 입자파쇄는 전단면근처에 집중되며 전단대를 형성하였다. 따라서 본 연구에서 제시한 수치해석 모델은 향후입자 파쇄를 포함한 조립재료의 전단강도 특성 연구에 다양하게 적용될 수 있다고 판단된다.