• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.799-816
• /
• 2023

Mineralogical and geochemical studies of shales within the Lower Anambra Basin was conducted to unravel the depositional environment, provenance, maturity, paleo-weathering conditions, and tectonic settings. Mineralogical studies conducted using X-ray diffraction analysis revealed that the samples were composed of kaolinite, montmorillonite, chlorite, and illite. KaolinIite is the dominant mineral, constituting approximately 41.5% of the bulk composition, whereas the non-clay minerals are quartz, ilmenite, and sillimanite. Geochemical analysis showed a predominance of SiO₂, Al₂O₃, and Fe₂O₃ contents of the shale samples with mean values of 52.29%, 14.09%, and 6.15% for Imo Shale (IS); 52.31%, 16.70%, and 7.39% for Mamu Shale (MS); 43.21%, 21.33%, and 10.36% for Enugu Shale (ES); 53.35%, 15.64%, and 7.17% for Nkporo Shale (NS); and 51.24%, 17.25%, and 7.78% for Agwu Shale (AS). However, the shales were depleted in Na₂O, MgO, K₂O, MnO, TiO₂, CaO, and P₂O₅. The trace element ratios of Ni/Co and Cu/Zn of the shale suggest an oxic depositional environment. The average SiO₂ vs. Al₂O₃ ratio of the shales indicated textural maturity. Compared to the PAAS standard, the shales plot below the PAAS value of 0.85, suggesting a high degree of maturity and intensive chemical weathering, further confirmed on a CIA vs. PIA plot. On log (K₂O/Na₂O) against SiO₂ and tectonic setting discriminant function diagrams, the shales plot mostly in the field of passive continental margin tectonic setting. The discriminant function diagrams as well as Al₂O₃/TiO₂ ratio of the shales showed that they were derived from a mixed source (mafic and intermediate igneous rocks).

• 한국해양학회지
• /
• v.22 no.2
• /
• pp.87-104
• /
• 1987

The middle Cretaceous stratigraphec section of Deep Sea Drilling Project (DSDP) Site 530 in the Angola Basin is characterized by cyclic interbeds of organic-carbon-rich black shales and organic-carbon-poor red and green claystones, namely the black shale sequence. A number of samples from the black shale sequence were analyzed for the typesand distribution of insoluble sedimentary organic matter(kerogen) in order to give more information on the depositional conditions of the black shales in the Angola Basin. The dominant type of kerogen in the black shale sequence at Site 530 is amorphous organic matter mainly of marine planktonic algal origin. It probably consists of remains of some unfossiliqed dinoflagellates. The cyclic preservation of organic-carbon-rich black shales in the Angola Basin during the mid-Cretaceous could be explained by the low dissolved-oxygen concentration in the warm, saline deep and bottom waters combined with the sluggish circulation within the highly restricted basin, and the periodic high productivity in the surface waters.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.105-116
• /
• 1997

This study is for extent of polluted area by acid mine drainage from the Daeseong coal mine, Keumsan. Black shales of the Changri Formation containing the Daeseong coal mine are geochemically similar to those from the North America as well as Europe. Comparing with geochemical compositions and relative ratios, coal bearing and non-coal bearing soils are similar to the stream sediments influenced and not influnced by the acid mine drainage, respectively. These characteristics suggest that acidification of the soils and of the stream sediments are related to the the coal bearing black shale. Soil waters beneath the coal bearing soil have low pH and high cation contents than those beneath non-coal bearing soil, suggestive of extractions of cations with increasing oxidizations within the soils. Surface waters show that those influenced by the acid mine drainage are low pH, and have high $SO_4{^{2-}}$, $Mg^{2+}$, $Fe^{2+}$, Mn and slightly lower DO, suggesting that heavy pollutions have been progressed in these area. Geochemical comparisons between the polluted surface water and adjacent black shales suggest that pollutions of the surface water are related to the black shales.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.487-492
• /
• 1995

The chemical compositions and pyrolysis characteristics of oil shales and source rocks distributed in the southwestern and southeastern parts of the Korean peninsular have been investigated. In order to compare the results of Korean samples with those of shales giving high oil yields, two Colorado oil shale samples and one Paris source rock samples were also investigated. Chemical compositions of the samples were analysed by means of gravimetry, CHN analysis, X-ray diffraction method, inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry. A custom made pyrolyser and a Rock-Eval system were used for the pyrolysis studies. Pyrolyses of the samples were carried out by means of a temperature controlling device to $600^{\circ}C$ at a heating rate of $5^{\circ}C/min$ with a helium flow rate of $1200m{\ell}/min$. The results of pyrolysis study indicated that Colorado shale samples belong to type I and all the other samples belong to type II.

• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.135-146
• /
• 1975

The chiastolite bearing shale was known to occur in various coal fields in South Korea among which the Kangneung coal fields is the most outstanding in quality and quantity of chiastolite. The chiastolite occurs mostly in black shales of Sadong formation and little in shales of Hongjom and Kobangsan formations, and is most abundant in the footwall coaly shales of the Sadong coal seams. The chiastolite has been proved to be thermal contact product of the high aluminous shale that comes into contact with Kangneung granite. The distribution of chiastolite in the Kangneung coal field is irregular. The eastern part of the region contains more chiastolite than that of western part. It is believed that the difference of the grade is due to the intensity of metamorphism. The grade of chiastolite in the shale varies from few percent up to as high as 60 % in volume, and the minable reserve of the chiastolite is estimated about 4,700,000 tons. This reserves is rather concentrated in few localities such as in Jiam Mine, Jungrim Mine, Sir 1 Hang in the Whasung Mine, the second and third sections of Kangneung Mine and Umbuelri district. The chemical composition of chiastolite bearing coaly shale is $SiO_2$, 35.0%; $Al_2O_3$, 27.0%; $Fe_2O_3$, 0.29%.

• Journal of the Korean earth science society
• /
• v.21 no.6
• /
• pp.683-694
• /
• 2000

Abstrace: The palaeodepositional environment and age of the Cretaceous Hampyeong Basin (southwestern Korea) are reassessed based on new geochemical, lithological, sedimentological, and palaeobotanical data. Results indicate that the Hampyeong Basin was a tectonically active basin comprising predominantly fluvial and lacustrine sediments. Four distinctive facies types have been identified (acidic tuff, black shales/sandstones, red beds, intermediate tuff with tuffaceous conglomerate) and these reflect periods of significant environmental change within the basin and its neighbouring terrains. Volcanism driven by tectonic events provides a source for much of the sediment. The sedimentary sequences compare well with those in the neighbouring Haenam Basin. Sediments of volcanic origin are similar to those of the Neungju Formation of the Yuchon Group. The widespread occurrence of black shales is indicative of extended periods of deposition under anoxic conditions. Measurements of total organic carbon show that the values for the black shales (0.81% to 1.75%) are the average for petroleum source shales. Fossil plants occurred in the black shales and sandstones. The occurrence of platanoid leaves places these sediments in Oishi's angiosperm series, which is consistent with an Aptian/Albian or younger age.

• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.21-37
• /
• 1993

In order to investigate the correlation of sedimentary rock properties. specific gravity, porosity, water content, sonic wave velodty, and point4oad strength index of core samples of limestones, sandstones and shales were measured. The relationships between density and velocity show $V_p=16300d-38719.3,{\;}V_s1896.4d-29225.1$ of regression equation for sandstones and $Vp=4085d-10264.8,{\;}V_s=3519d-7841.3$ for shales and <$Vp=4085d^2-20747d+303,{\;}V_s=3899d^2-21442d+318$ for limestones. Seismic wave velocity of shales which have high density is lower than that of sandstones, and this seems to be an effect of bedding in shale. P-wave velocity and S-wave velocity of limestones, sandstones and shales show the linear relationships as a whole. The regression equations are respectively calculated V_s=0.26V_p+1041.6m/sec,{\;}V_s=0.43V_p+424.2m/sec,{\;}and{\;}Vs=0.51V_p+261.9m/sec$ and the correlation coefficients of the velocity show r= 0.86 in sandstones, r= 0.75 in limestones and r=0.86 in shales. According to the point4oad strength test for limestones, point4ord strength anisotropy was not so dear even though the specimens show generally the banded structure. Variations of dip angle of bedding whihin the range $30^{\circ}-60^{\circ}$ does not have much influence upon the diametral strength index and axial strength index. From the result of point load test, P-wave velocity increases with point4ord strength index but the regression equations are $V_p=98.5lI{s_d}+4082.1m/sec,{\;}V_p=106.41{s_a}+3954m/sec$ and their correlation coefficient is low.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.435-441
• /
• 2010

In this study, numerical simulations were carried out to investigate the effect of verification core hole on the shaft tip capacity. The verification core extreted at shaft tip may deteriorate the shaft tip capacity when the clay shales (Taylor Marl) surrounding the shaft degrades and the empty core hole remains unfilled. Series of finite element analyses were conducted using Mohr-Coulomb model with total stress material parameters that were obtained from laboratory testing. The numerical analyses indicate that the shaft tip capacity does not decrease for most cases, and the maximum reduction does not exceed 5%.

• Journal of the Korean Ceramic Society
• /
• v.15 no.3
• /
• pp.149-156
• /
• 1978

The utilization of waste and industrial byproduct materials, such as blast furnace slag, shales, poor coal and anthracite briquet ash, were investigated as a source of calcareous or argillaceous material in the manufacture of Portland cement. As a slag is similar to cement in chemical compoment and contains about 40∼50% of CaO, it's utilization in cement manufacture should be suitable. The burnability was increased and the heat of clinker formation was decreased by using slag. Some consideration should betaken in the use of large quantity because of sticking in suspension preheater kiln. Suitable quantities of colliery shales and poor coal should be useable in cement manufacture as a argillaceous materials and also its combustible materials should be utilized in cement manufacture. Anthracite briquet ash is also usable as a argillaceous source and it gives good burnability.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.77-84
• /
• 2005

Foliated metamorphic, stratified sedimentary and regularity jointed rocks have properties(physical, mechanical) that vary with direction (${\beta}^{\circ}$) and are said to be anisotropic. The ground in Daegu area consists of shales, clastic sedimentary rocks. These shales have plane anisotropic or transversely isotropy characteristics. Engineering characteristics of shale in Daegu area are investigated by performing a series of rock test to the bedding(${\beta}$ =0, 30, 60, and 90 degrees). The results of tests show that the uniaxial compressive strength is a maximum at ${\beta}$ = 0, $90^{\circ}$ and is a minimum when ${\beta}$ is around 60 degree.