• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.276-280
• /
• 2021

The oxygen transfer rate at the liquid surface of the reciprocally shaking vessel was studied. The required power of the reciprocally shaking vessel was not proportional to the shaking frequency, unlike the rotational shaking vessel, and the liquid level suddenly fluctuated greatly at a certain frequency as the flow pattern in the vessel was a left and right wave flow different from that of the rotational shaking that has a rotational flow. The effect of the shaking frequency on the required power in the reciprocally shaking vessel was very complex, such as less power required than the rotational shaking vessel when the shaking frequency is more than 3 s-1, but the required power for the range of the generated rotational flow in the reciprocally shaking vessel could be correlated with the equation that was reported for the rotational shaking vessel. The kLa (mass transfer capacity coefficient) in the reciprocally shaking vessel also increased in a complex pattern because the required power for shaking was not consumed in a simple pattern, unlike kLa in the rotational shaking vessel, which increases linearly with increasing frequency. The kLa of the reciprocally shaking vessel was larger than the kLa of the rotational shaking vessel, and as the kLa value increased, the difference between them increased sharply. As a result, the oxygen transfer rate in the reciprocal motion was greater than that of the rotational motion, and could be correlated with the required power per unit volume.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.174-180
• /
• 2015

The flow pattern and the solid-liquid mass transfer coefficient in figure-eight shaking vessels were observed by experimental method. The flow patterns, mixing time, power consumption and mass transfer coefficient in the figureeight shaking vessels changed irregularly with increase in the shaking frequency. Any frequency, even in the Fr = 0.095 or more became clear experimentally. The region of the optimum operating condition of the figure-eight shaking was larger than that of the reciprocal shaking. The solid-liquid mass transfer coefficient was correlated with the same correlation as that of the rotary shaking vessel of existing. The gas-liquid mass transfer coefficient of the figure-eight shaking vessel was also correlated with the same type of correlation as that of the rotary shaking vessel of existing.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.73-81
• /
• 1999

Shake mixing has been widely used in cell culture. The mixing performance for shake mixing, however, has not been reported quantitatively. The critical circulating frequency and the power consumption for complete suspension of particles, based on the definition of Zwietering, were measured in a shaking vessel containing a solid-liquid system. The critical suspension frequency was correlated by the equation from Baldi's particle suspension model modified with the physical properties of the particles. Critical suspension frequency was correlated as following ; $$N_{JS}={\frac{0.58\;d{_p}^{0.06}(g{\Delta}{\rho}/{\rho}_L)^{0.004}X^{0.03}}{D^{0.35}d^{0.17}{\upsilon}^{0.04}}}$$ The power consumption at the critical suspension condition in the shaking vessel was less than that in an agitated vessel with impeller.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.1
• /
• pp.49-56
• /
• 2003

Based on the flow patterns of cylindrical vessel, the flow patterns of conical vessel, spherical vessel, rectangular vessel and cylindrical vessel with baffles were visualized by a trace method using aluminum powder. In addition, the correlations of the critical circulating frequency for mixing were derived from the experimental results. The conical and spherical vessels which have circular cross sections were same effective as cylindrical vessel for the shake mixing due to developing the rotational flow. Both a rectangular vessel and a cylindrical vessel with baffles should not be adapted for shake mixing because of not developing rotational flows in these type of vessels.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.2
• /
• pp.173-180
• /
• 2012

This paper proposes a novel optimization algorithm inspired by water flowing and shaking behaviors in a vessel. Water drops in our algorithm flow to the gradient descent direction and are sometimes shaken for getting out of local optimum areas when most water drops fall in local optimum areas. These flowing and shaking operations allow our algorithm to quickly approach to the global optimum without staying in local optimum areas. We experimented our algorithm with four function optimization problems and compared its results with those of particle swarm optimization. Experimental results showed that our algorithm is superior to the particle swarm optimization algorithm in terms of the speed and success ratio of finding the global optimum.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.3
• /
• pp.209-217
• /
• 2000

An attempt has been made to examine the highest liquid surface by means of measuring the movement of liquid free surface wave in the agitated vessel wall. Also, Relationship has been investigated between transition frequency, $N_z$ for behavior of liquid free surface and transition frequency for behavior of mass transfer coefficient in the agitated vessel wall. A surface wave is occured within agitated vessel, the highest height of wetted vessel wall, $h_w$ is coincided with the highest liquid surface, h. However the lowest height of wetted vessel, $h^*{_w}$ is not descended to lowest liquid free surface, $h^*$. The proposed model has been tested sucessfully for the behavior of liquid free surface.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.353-359
• /
• 1996

The experiments were conducted in the leaching of aqueous uranium from low-grade uranium ore by Thiobacillus ferrooxidans. The optimal concentration of ferrous iron in 9K medium was 16.2g/L when the uranium ore concentration in slurry was 40g/L. The leaching rates were increased by decreasing the particle size of uranium ore and by increasing uranium ore concentration. In the leaching experiments in an agitated vessel reactor, only 39.3% of uranium was leached out within 12 days, which was comparable as that in the shaking incubator, without any notable improvement. Hence, it was observed that an agitated vessel reactor was not effective in the leaching of uranium from uranium ore by T. ferrooxidans. In the leaching experiments in a draught-tube reactor, the maximum concentration of uranium leached and cell number were a 12.8mg/L and $2.47{\times}1010cells/mL$ respectively. The uranium yield reached up to 91.4% within 11 days culture due to enhanced aeration and mixing characteristics of draught-tube reactor as compared to agitated vessel reactor.

• International Journal of High-Rise Buildings
• /
• v.5 no.3
• /
• pp.213-220
• /
• 2016

The "China Zun" tower in Beijing will rise to 528 meters in height and will be the tallest building in Beijing once built. Inspired by an ancient Chinese vessel, the "Zun", the plan dimensions reduce gradually from the bottom of the tower to the waist and then expand again as it rises to form an aesthetically beautiful and unique geometry. To satisfy the structural requirement for seismic and wind resistance, the structure is a dual system composed of a perimeter mega structure made of composite mega columns, mega braces, and belt trusses, and a reinforced-concrete core with steel plate-embedded walls. Advanced parametric design technology is applied to find the most efficient outer-perimeter structure system. The seismic design basically follows a mixed empirical and performance-based methodology that was verified by a shaking table test and other specimen lab tests. The tower is now half-way through its construction.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.477-482
• /
• 1992

A bacterial strain Acinetobacter calcoaceticus was examined for its ability to degrade fats, oils and hydrocarbons, and tested for the possibility of application in wastewater treatment. All fats and oils tested were degraded by the strain. About 60% of hexadecane, 26% of fish oiL and 40-54% of vegetable oils were consumed respectively in shaking-flask culture. Saturated fatty acid compositions were about 55% in fish oil and 6-12% in vegetable oils. Increases in cell mass were accompanied with decreases in the concentrations of carbon sources. When jar fermentor in place of shaking-flask was used as a culturing vessel. above 80% of all carbon sources was consumed and yield of cell mass was improved to nearly 1.00. Synthetic wastewaters containing 3% of fat, oil, or hydrocarbon as a sale ca,bon source were treated sequentially with A. calcoaceticus first and then exposed to activated sludge. The concentrations of carbon sources were decreased below 0.06% through the process, and the concentrations of suspended solids were lower than 53 mglml. The data imply the potential use of A. calcoaceticus in wastewater treatment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1023-1026
• /
• 2006

There are some cases in trouble with monitoring emergency patient by existing electrode sensor in measuring instrument in home and hospital etc. And there are problem to measure because of coming down electrode in emergency car or vessel of shaking and fat, humidity of patient. In this study, it has designed band-type for patient to put on the breast easily and go around anywhere freely putting band electrode on his body. Gold has used as electrode material in this electrocardiogram because of its excellent electronic resistance peculiarity and no trouble with skin. And it is able to monitor multi-body-signal by additional design of periphery temperature. There are good results of body signal transmission in the breast or the rib, and get a little body signal in abdomen. We get a result it is better case of gold than usual electrode on signal detection, and know usual electrode was disposable, but we have more correct result from gold electrode sensor, being semi-permanent ana. great contact ability even if movement.