• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.361-366
• /
• 2016

The physicochemical characteristics of fresh noodles made with blends of low-protein wheat flour and barley byproduct (BBP, $250{\mu}m$) were investigated. The crude protein contents (PC) of flour from Goso and Backjoong cultivars were 7.91% and 7.67%, respectively. PC and ${\beta}$-glucan contents from the BBP were 14.10% and 3.11%, respectively, which were higher than those in wheat flour. The water-holding capacity (WHC) of various blends was increased as a function of BBP but not gluten contents. Goso flour had the highest starch content (78.68%), with peak and final viscosities of 3,099 and 3,563 cp, respectively. Peak and final viscosities, trough, breakdown, and setback of the blends were decreased with the addition of BBP. Noodles made with Backjoong had the highest thickness score, while the hardness of noodles made with blends of Goso or Backjoong and 20% BBP were similar to those made from wheat flour only. The WHC of the samples was strongly correlated with PC, crude fiber, and ${\beta}$-glucan. The PC was not correlated with final viscosity, setback, thickness, hardness, gumminess, or chewiness.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.64-69
• /
• 1999

Gelatinization characteristics of 111 glutinous rice varieties were evaluated by Rapid Visco Analyzer. Gelatinization viscosity of glutinous rice tested varied with ecotypes or varietal groups: indica, japonica, and Tongil type. Indica rice showed the highest average value of initial pasting temperature. The average values for peak, hot, and cool viscosities were highest in Tongil-type rice, and lowest in japonica rice. Japonica showed the lowest breakdown and consistency, but the highest setback value. Indica was lower in alkali digestion value (ADV), and shorter in gel length after gelatinization thanjaponica and Tongil-type. Glutinous rices tested could be divided into six groups by cluster analysis based on their gelatinization characteristics. Group I-A was mostly early maturing japonica varieties while I-B was mostly indica and Tongil-type rices. Groups II-A and II-B were consisted of very early maturingjaponica, and III-A and III-B included medium or medium late maturingjaponica varieties. Group III-A showed the lowest average values of peak, hot, cool, and consistency viscosities, and also in breakdown and setback ratios. Group I-B revealed the highest values in peak, hot, cool, breakdown, and consistency viscosities. ADV was low in groups I-A, I-B, and II-B, and gel consistency was not different among the six varietal groups. Principal component analysis using seven traits related with gelatinization produced four effective components, and the first and second components were highly correlated with all the gelatinization characters evaluated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.189-195
• /
• 2002

Corn starch was modified by oxidation with sodium hypochlorite (NaOCl) as an attempt to expand the application of starches in food industry. Corn starch was oxidized with 0.25, 0.5, 0.75, 1.0 and 1.5% active Cl/g starch at pH 7.0 and $25^{\circ}C$ for 10 minutes. The size, shape and amylose content of oxidized starches were similar to those of native corn starch. As the extent of oxidation increased, solubility, swelling power and the amount of soluble amylose increased, X-ray diffraction patterns changed, and relative crystallinity decreased. In Brabender amylogram, oxidation did not chance the gelatinization temperature, but oxidized starches had a lower peak in viscosity and their cooled pastes gave less setback, compared with native corn starch.

• Advances in concrete construction
• /
• v.5 no.4
• /
• pp.407-422
• /
• 2017

Evaluating seismic performance of urban structures for future earthquakes is one of the key prerequisites of rehabilitation programs. Irregular structures, as a specific case, are more susceptible to sustain earthquake damage than regular structures. The study here is to identify damage states of vertically irregular structures using the well-recognized Park-Ang damage index. For doing this, a regular 3-story reinforced concrete (RC) structure is first designed based on ACI-318 code, and a peak ground acceleration (PGA) of 0.3 g. Some known vertical irregularities such as setback, short column and soft story are then applied to the regular structure. All the four structures are subjected to seven different earthquakes accelerations and different amplitudes which are then analyzed using nonlinear dynamic procedure. The damage indices of the structures are then accounted for using the pointed out damage index. The results show that the structure with soft story irregularity sustains more damage in all the earthquake records than the other structures. The least damage belongs the regular structure showing that different earthquake with different accelerations and amplitudes have no significant effect on the regular structures.

• International Journal of High-Rise Buildings
• /
• v.8 no.4
• /
• pp.303-311
• /
• 2019

The effectiveness of aerodynamic modification to reduce wind loadings has been widely reported. However, most of previous studies have been investigated dynamic forces and pressure distributions on tall buildings with various unconventional configurations. This study was investigated dynamic characteristics and aerodynamic instability of super-tall buildings with unconventional configurations through extensive aeroelastic model experiments. Seventeen types of supertall building models were considered such as basic and corner modification with corner cut, chamfered, oblique opening, tapered, inversely tapered, bulged, helical with twist angles of $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, $360^{\circ}$ and composite with $360^{\circ}$ helical & corner cut, 4-tapered & $360^{\circ}$ helical & corner cut, setback & corner cut, setback & $45^{\circ}$ rotate. As a result, aerodynamic characteristics of helical models with single modification are superior to those of other models with single modification. However, effect of twist angle for helical model is negligible. Further, the 4-tapered & $360^{\circ}$helical & corner cut model is most effective in reducing the along- and across-wind fluctuating displacement responses in all of experimental models.

• International Journal of High-Rise Buildings
• /
• v.8 no.4
• /
• pp.235-253
• /
• 2019

This paper reviews shape optimization studies for tall and super-tall building design. Firstly, shape effects on aerodynamic and response characteristics are introduced and discussed. Effects of various configurations such as corner modifications, taper, setback, openings, and twists are examined. Comprehensive comparative studies on various configurations including polygon building models, and composite type building models such as corner-cut and taper, corner-cut and taper and helical, and so on, are also discussed under the conditions of the same height and volume. Aerodynamic characteristics are improved by increasing the twist angle of helical buildings and increasing the number of sides of polygon buildings, but a twist angle of $180^{\circ}$ and a number of sides of 5 (pentagon) seem to be enough. The majority of examined configurations show better aerodynamic characteristics than straight-square. In particular, composite type buildings and helical polygon buildings show significant improvement. Next, shape effects on pedestrian-level wind characteristics around tall and super-tall buildings are introduced and discussed. Corner modification buildings show significant reductions in speed-up areas. On the other hand, setback and tapered models with wider projected widths near the ground show adverse effects on pedestrian-level wind characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1797-1801
• /
• 2011

Two brown rice samples differing in amylose content, 20.1 (normal) and 7.3% (low amylose) were milled by different milling methods, and their physicochemical properties were tested. Particle size of brown rice flour prepared by dry milling using a pin mill (DM) was lower than that prepared by wet milling using a roll mill (WM). Particle size was further reduced by successive dry milling of the flour after wet milling and drying (WM/DM). Damaged starch contents in the wet milled brown rice flour were 14.6 and 15.6% for the normal and low amylose samples, respectively, whereas they were only 4.2 and 4.8% for the dry milled samples. WM/DM method resulted in a lower damaged starch (%) than DM, despite a reduced flour particle size. Water absorption index (WAI) of the brown rice flour was the lowest after WM/DM, and the water solubility index (WAI) was higher in the order of DM, WM/DM, and WM. Brown rice flour with normal amylose content appeared to have significantly higher pasting viscosities, as determined using a Rapid Visco Analyzer (RVA). Compared to dry milled brown rice flour, wet milled brown rice flour showed lower peak viscosity and higher final viscosity, resulting in increased setback value.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.320-329
• /
• 2005

The three-dimensional (3D) changes of bone, soft tissue and the ratio of soft tissue to bony movement was investigated in 8 skeletal Class III patients treated by mandibular setback surgery. CT scans of each patient at pre- and post-operative states were taken. Each scan was segmented by a threshold value and registered to a universal three-dimensional coordinate system, consisting of an FH plane, a mid-sagittal plane, and a coronal plane defined by PNS. In the study, the grid parallel to the coronal plane was proposed for the comparison of the changes. The bone or soft tissue was intersected by the projected line from each point on the gird. The coordinate values of intersected point were measured and compared between the pre- and post-operative models. The facial surface changes after setback surgery occurred not only in the mandible, but also in the mouth corner region. The soft tissue changes of the mandibular area were measured relatively by the proportional ratios to the bone changes. The ratios at the mid-sagittal plane were $77\~102\%(p<0.05)$. The ratios at all other sagittal planes had similar patterns to the mid-sagittal plane, but with decreased values. And, the changes in the maxillary region were calculated as a ratio, relative to the movement of a point representing a mandibular movement. When B point was used as a representative point, the ratios were $14\~29\%$, and when Pog was used, the ratios were $17\~37\%(9<0.05)$. In case of the 83rd point of the grid, the ratios were $11\~22\%(p<0.05)$.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.267-278
• /
• 2002

To promote the consumption of race, comparative study was performed on characteristics of wheat flour noodle mixed with brown rice flour and colored rice flour. Protein content of colored rice was higher than that of the brown rice, but lipid and ash contents were similar to those of brown rice. Colored rice flour had significantly lower peak viscosity, holding viscosity, breakdown viscosity, final viscosity and setback viscosity than those of wheat flour, while brown rice had significantly higher peak viscosity, breakdown viscosity and setback viscosity than those of colored rice flour and wheat flour. Colored rice and brown rice had 5.3~6.4% total dietary fiber, and the proportions of soluble fiber in total dietary fiber were quite low, ranging from 9.4% to 18.8%. L(brightness), a(redness) and b(yellowness) of raw noodles were measured using a colorimeter. L(brightness) and b(yellowness) values of Asian raw noodles made from colored rice and brown rice significantly decreased. Addition of colored rice flour and brown rice flour to Asian noodle reduces cutting forces of dry and cooked noodles. The cooked noodle with 10% chalheukmi waxy rice flour was the highest in the cutting force of cooked noodle. Addition of 20% chalheukini waxy rice flour and 20% brown rice flour to wheat flour was got to a relatively high score for appearance, color, texture, taste and overall eating quality from sensory evaluation of cooked noodles.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.191-205
• /
• 2000

The purpose of this study was undertaken to determine the effects of orthognathic surgery on speech. The hyposis stated herein is that functional behaviors of the dentofacial complex, such as speech production, may be adversely affected by deviations of a structural nature(especially, Class III malocclusion). Twenty adults with Class III malocclusion(13 female and 7 male) were studied preoperative, immediate postoperative and either 6 or 12 months postoperative lateral cephalograms. They had mandibular prognathism and had undergone mandible setback operation. The position of tongue, soft palate(Uvula), hyoid bone, respiratory track width, and pharyngeal depth were assessed on lateral cephalograms with 23 cephalometric variables, ANOVA, Paired t-tests and Pearson's product-moment correlation coefficient tests were used to evalute the operative changes in all cephalometric parameters. A experienced speech and language pathologists performed narrow phonetic transcriptions of tape-recorded words and sentences produced by each of the ninth patients and the recording tapes were analyzed by phonetic computer program(Computerized Speech Lab(CSL) Model 4300BI(U.S.A.)) These judges also recorded their ratings of each patient's overall consonants, hypernasality, hyponasality, and articulation proficiency. The results obtained are as follows; 1. There were significant changes in distance of posterior pharyngeal wall to tongue (TI-TW2, TS-TW3) after the surgery at 6 months postoperatively(each p<0.01 p<0.05). 2. The posterior tongue point(TI, TS, PPT) moved posteriorly after surgery and remained to its changed position at 6 months postoperatively(p<0.05). The displacement of tongue was correlated with the movement of mandibular setback amount(p<0.05). The hyoid bone moved posteriorly superiorly after immediate postoperative period. There was significant changes in hyoid bone movement after immediated postoperative period(p<0.05), but returned to its original position during the follow-up period(p>0.05) 3. The soft palate was displaced posteriorly superiorly after immediated operative period and remained to its changed position at 6 months postoperatively(p<0.05). ANS-PNS-SPT angle increasing, PPU-PPPo distance narrowing was showed after surgery, and remained its appearance 6 months postoperatively(p<0.05). 4. There were significant changes in formant value and squre diagram of vowel sound after the orthognathic surgery and the follow-up period. There were significant changes in /ㅅ/sound and posterior tongue sound. 5. The posterior movement of tongue and the posteriosuperior movement of soft palate was correlated with mandibular setback amount after orthognathic surgery. On the vowel squre diagram, the author found that the place of articulation after operation moved downward, backward, upward. 6. In assessing speech abnormalities, dental occlusion should be considered as a contributing factor. The vast majority of subjects with preoperative misarticulations eliminated or reduced their errors following orthognathic surgery. There was significant difference in speech impovement between pre- and postoperation.