• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.393-399
• /
• 2007

Concrete bridge decks are directly exposed to the severe environmental conditions such as rain water and deicing chemicals resulting in the freeze-thaw action and the rebar corrosion during their service lift. These deteriorations of bridge decks shorten the service lift and consequently they are the major concerns of the maintenance. The high performance concrete (HPC) deck is proposed as the alternative to minimize the deterioration problems. To develop more durable concrete deck, the performance characteristic tests of HPC mixtures were carried out. In this study, 4 different concrete mixtures were used varying the mineral admixtures as the cement replacement; ordinary portland cement (OPC), 20% fly ash (FA),20% fly ash with 4% silica fume (FS), and 40% ground granulated blast-furnace slag (BS). The design compressive strengths of HPC specimens were 27 MPa and 35 MPa, respectively. The results showed that the compressive strength of concrete did not much affect the durability of concrete. HPC with fly ash and silica lune (FS) were turned out to have the good durability and crack resistance.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.181-194
• /
• 2014

A major problem with high-mast light poles is the effects that wind vortex shedding can have on the pole itself because of the lock-in phenomenon. It is desired that the coefficients in the AASHTO Standard Specifications ($5^{th}$ edition) for Structural Supports for Highway Signs, Luminaries, and Traffic Signals be analyzed and refined. This is for the belief that the span of the shapes of poles for which the coefficients are used is much too broad and a specific coefficient for each different shape is desired. The primary objective of this study is to develop wind vortex shedding coefficient for a multisided shape. To do that, an octagonal shape was used as the main focus since octagonal cross sectioned high-mast light poles are one of the most common shapes in service. For the needed data, many wind parameters, such as the static drag coefficient, the slope of aerodynamic lift coefficient, Strouhal number, the lock-in range of wind velocities producing vibrations, and variation of amplitude of vortex-induced vibration with Scruton number are needed. From wind tunnel experiments, aerodynamic parameters were obtained for an octagonal shape structure. Even though aerodynamic coefficients are known from past test results, they need to be refined by conducting further wind tunnel tests.

• Asian Journal of Innovation and Policy
• /
• v.6 no.1
• /
• pp.58-84
• /
• 2017

This article aims at demonstrating location specific approach for agricultural technology promotion and adoption in improving the livelihood of the small farmers in the haor basin and coastal belt of Bangladesh. Innovative technologies that have potentials are initially screened by ex-ante investigation and instrumented by the business model canvas, which is used as a bottom-up approach for sustainability of the adoption of proposed technology innovations. Village-level extension farmers, sub-district extension officers and farmers' cooperative are the unique and central features to the business models and forward linkages. Extension service, power tiller, low-lift pump, sunflower, shallow tube well, quality seed, forward linkage for farmed duck eggs, live ducks and open catch fish etc. are the suggested potential technology innovations for the small farmers. The technology adoption business model can be reinvented for different locations within or beyond the country considering the local agricultural problems and prospects for greater sustainability.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.2
• /
• pp.211-216
• /
• 2010

Fire service personnel and ambulance paramedics suffer musculoskeletal disorders as they lift and carry patients while performing Emergency Medical Services (EMS). The objective of the current study was performed to examine the association between working environment and musculoskeletal disorders of 119 paramedics and to analysis the EMS activities for them through basic survey (including task characteristics, risk factors, symptoms and illnesses). Observational job analysis of EMS activities indicated the squatting posture during first-aid performed on floor and the abrupt use of force during carrying heavy load including stretcher with patients on as hazard factors, and excessive low back twisting and bending during stairway transfer was observed. In addition, work-physiological assessment revealed various but rather high lumbar muscle usage rate among the study subjects, being 14.6~32.8% compared with Maximum Voluntary Contraction (MVC) during patients transfer work. Resting heart rate showed 65/min, on the other hand, heart rate on mobilization indicated maximum 124~156/min. Therefore, the results of analysis to the EMS activities, rescuer activities and medical tasks were accompanied with high possibility of accident and musculoskeletal disorders. Also, EMS activities indicated high muscle fatigue and energy consumption, and accumulated muscle fatigue with during continued work.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.346-353
• /
• 2002

The risk of bearing failure is evaluated through the seismic response analysis of a bridge considering the probabilistic characteristics of structural properties such as the mass of superstructure, the stiffness of pier, and the translational and rotational stiffness of the foundation as well as seismic loadings during the bridge service lift. The effect of pounding between adjacent vibration units on the risk of bearing failure is also investigated. The probabilistic characteristics of structural properties are obtained by the Monte Carlo simulations based on the probabilistic characteristics of basic random variables included in the structural properties. From the simulation results, the failure probability of fixed bearings attached on the abutment is found to be much higher than those placed on the piers. It is also found that the pounding effect significantly increases the failure probability of bearings. In the simply supported bridges, the risk of bearing failure increases as the number of bridge spans increase. Therefore, the failure probability of fixed bearing due to the effects of pounding phenomena and the number of bridge spans should be considered in the seismic desist of bearings.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.102-108
• /
• 2004

This study addresses the contamination sensitivity test of a typical fuel pump for automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of fuel pump on specific contaminant particle sizes so that optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of fuel pump was measured under the experiments of various contaminants size ranges of ISO test dust up to 80${\mu}{\textrm}{m}$. The fundamental theory of contamination sensitivity was introduced and the contamination sensitivity coefficients were estimated using the experimental data. Maximum contamination sensitivity coefficient of $5{\times}10^{-6}$ L/minㆍEa was found on the contaminant size range of 40${\mu}{\textrm}{m}$∼50${\mu}{\textrm}{m}$. The magnified picture of the surface of vane disc revealed that the abrasive wear was the principal cause of discharge flow rate degradation. Hence, this study revealed that high efficiency filter on the contaminant particle size range of 30${\mu}{\textrm}{m}$∼70${\mu}{\textrm}{m}$ especially should be used to maintain the service lift of the fuel filter.

• Journal of information and communication convergence engineering
• /
• v.21 no.2
• /
• pp.117-129
• /
• 2023

High-utility itemset mining (HIUM) has emerged as a key data-mining paradigm for object-of-interest identification and recommendation systems that serve as frequent itemset identification tools, product or service recommendation systems, etc. Recently, it has gained widespread attention owing to its increasing role in business intelligence, top-N recommendation, and other enterprise solutions. Despite the increasing significance and the inability to provide swift and more accurate predictions, most at-hand solutions, including frequent itemset mining, HUIM, and high average- and fast high-utility itemset mining, are limited to coping with real-time enterprise demands. Moreover, complex computations and high memory exhaustion limit their scalability as enterprise solutions. To address these limitations, this study proposes a model to extract high-utility frequent closed itemsets based on an improved cumulative summary list structure (CSLFC-HUIM) to reduce an optimal set of candidate items in the search space. Moreover, it employs the lift score as the minimum threshold, called the cumulative utility threshold, to prune the search space optimal set of itemsets in a nested-list structure that improves computational time, costs, and memory exhaustion. Simulations over different datasets revealed that the proposed CSLFC-HUIM model outperforms other existing methods, such as closed- and frequent closed-HUIM variants, in terms of execution time and memory consumption, making it suitable for different mined items and allied intelligence of business goals.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.45-53
• /
• 2023

This study optimized the parameters of the helical gear based on the original external meshing helical gear pump, combined with the analysis of the stability and flow of the basic parameters of the equipment; herringbone gears were used to eliminate the axial force generated by the helical gears. An optimized helical gear rotor was built with NX. The error between the simulation and calculation results of pump displacement was 3.95% and the simulation results were valid. Analysis of the outlet pressure and lift changes (maximum change rates of 0.38% and 0.25%), pressure analysis of the XY center plane at different times in the same cycle (no pressure surge or drop), and analysis of the axial force of the primary and driven rotors (axis The axial force is close to 0) were performed. The results showed that the flow pulsation of the external gear pump was slight, the operation was smooth, vibration and friction were reduced, the wear of bearings and other components could be diminished, and the service life of the equipment was extended. The simulation results showed that the external gear pump met the design requirements.

• Proceedings of the CALSEC Conference
• /
• 2004.02a
• /
• pp.65-72
• /
• 2004

The Internet is a social and economic foundation, apparently destined for human communication and interaction. It is supposed to allow for more interactive and innovative ways for people to do what they do in 'real lift'. There is no shilly-shallying to say that at present, Internet has become a commanding and useful tool for empowerment and income making in developing countries. It is very difficult to say that at present internet has turned into a popular and useful thing among the Bangladeshi people like students, doctors, engineers, businessmen, researchers as well as politician who are being logged into the internet for getting information what they want. Though the Internet was invented in 1970 but it came late in Bangladesh through UUCPs (Unix-to-Unix copy) email connectivity in 1993 and IP connectivity in 1996. Having launched Internet, on June 1996 National polls result were broadcast through the using of World Wide Web (WWW) that was the first ever practice trial in Bangladesh. On June 1996, the government has approved to allow VSAT (Very Small Aperture Terminal) in the country's private sector to operate as Internet Service Provider (ISPs). At the end of year, there were only two ISPs in the country and number of users near about one thousand only. But next year in 1997, the total number of ISPs was more than a dozen and the clientele growth was ten times higher than that of the previous year. From then, the number of Internet users and ISPs are increasing significantly in Bangladesh. About 40 ISP are providing internet service among as many as 3, 20,000 users at present out of almost 130 license holder ISP provider but among the ISPs, most of the ISPs are placed in Dhaka and few are working in Comilla, Sylhet, Rajshahi, Chittagong and Khulna. It should be mention that currently, broadband internet (Radio, Cable) connection is working side by side dial -up connection where broadband accounts 10,000. This paper will have a comprehensive discussion on the current situations of Internet and some of the contemporary issues in the matter concerned.

• Korea journal of population studies
• /
• v.20 no.1
• /
• pp.129-159
• /
• 1997

The main purpose of this study is to describe the different life chances among various occupational groups in Chonbuk Province which has been excluded in the process of Korea's industrialization since the 1960s. More specifically, this study analyzed to what extent 6 occupational groups have the different life chances in the sub-levels such as health conditions and leisure life. According to our data analysis, it is found that the 6 occupational groups have the different life chances. That is, while those who are engaged in the higher prestigious occupation have a good life chance, those who in the lower prestigious occupation have a worse life chance. For example, among 6 occupational groups, professional-managerial who secure the higher autonomy and stability in their work have the highest life chance in the labor and health, and leisure life. Next, professional-technical, white-collar, sales-service occupants have the higher life chance after the professional-managerial. However, these 3 occupation groups are partially inconsistent in the two sectors of the life chance. Specifically, the professional-technical, despite their autonomy and stability in the work world, conceived that their work conditions are worse as well as badly influencing on their own health. On the other band, the sales-service workers group, despite their lower social status, is relatively autonomous and stable in their work environment and thus has the higher life chances. Finally, agricultural and productive workers have relatively the lower lift chances. Nevertheless, there are some clear differences among these 2 occupational groups. That is, the farmers have relatively the higher life chances in the sectors of socio-economic characteristics, and labor and health rather than productive workers. As a result, the productive workers are generally located in the lowest level of life chance. This fact is particularly attributed to the fragility of manufacturing industries in Chonbuk Province.