• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.159-166
• /
• 2014

The study is conducted on the subject of optimization of components sizing for series hybrid electric propulsion systems. The components sizing of series type hybrid system is very important because each component of series type is larger than the corresponding component of the parallel type or series-parallel type. If the components sizing is greater or less than what is required to this system, the performance of the system is getting worse. The methodology for the sizing of a driving motor is introduced based on the foundation of determined system configuration and performance target. And the sizing of an engine/generator and a battery is achieved based on simulation results using Dynamic Programming. It is possible to find the optimal sizing of these components by comparing fuel efficiency of hybrid electric propulsion system for 8 driving cycles.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.241-248
• /
• 2010

A bimodal low-floor tram can provide the punctuality of trains and the flexibility of bus together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents a development of the measurement equipment for fine-tuning of a series hybrid propulsion system of bimodal low-floor tram. Its configuration schemes are described and certified using the measurement data of bimodal low-floor tram.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.930-939
• /
• 2009

A bimodal tram is being developed to combine the flexibility of a bus with the punctuality of a train. The propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents the experimental results of the series hybrid propulsion power unit using an active loader which can simulate powering and regenerative braking conditions of the propulsion equipments continuously. The power sharing scheme between PWM converter and a battery pack has been observed. The measurement results of DC link voltage and SOC(State Of Charge) of battery pack are presented.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.366-373
• /
• 2012

In this paper, serious changes in the electromagnetic environment with increasing power and energy capabilities for electric driving and military mission are discussed. Design and control strategies on the Electro-Magnetic Compatibility(EMC) for the series hybrid electric vehicle are proposed to minimize the effects of electromagnetic interferences.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1968-1977
• /
• 2008

A bimodal low-floor tram is designed to provide the flexibility of bus and the punctuality of trains together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. The present paper describes the specifications of the propulsion system in the bimodal tram which was drawn by a desirable driving cycle. In addition, it shows how the propulsion system of the bimodal tram can be controlled. With using a computer simulation tool of hybrid vehicles, ADVISOR, the performance of the bimodal tram was verified.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.930-937
• /
• 2012

Newly developed Series hybrid low-floor articulated vehicle which can meet both road and railway running conditions. It has the rated driving speed of 80 km/h and three driving modes with hybrid(engine+battery) driving mode, engine driving mode, battery driving mode. The battery driving mode requires the several 10 km running without additional charging operation. The vehicle has been equipped with LPB (lithium polymer battery) pack for the series hybrid propulsion system. LPB pack consists of 168 cells (3.7 V in a cell, 80 Ah) in series, DC Circuit breaker, mechanical rack, BMS (battery management system). This paper has shown the design process of LPB pack and application to the vehicle. Driving results in the road was successful to be satisfied with the requirement of the series hybrid vehicle.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.122-128
• /
• 2009

바이모달 수송시스템 연구단에서 개발중인 트램은 자동운전이 가능하고 일반도로와 전용구간을 주행할 수 있는 고무차륜방식의 저상굴절 바이모달 트램으로서, 압축천연가스 엔진과 리튬폴리머 배터리를 사용하는 직렬형 하이 브리드 추진계로 구동된다. 본 논문에서는 바이모달 트램의 직렬형 하이브리드 추진장치의 요구사양을 제시하고 하이브리드 추진제어방식에 관해 설명한다. 하이브리드 차량 시뮬레이션 툴인 ADVISOR를 사용하여 기준 주행사이클과 일본의 10-15 mode에 대한 바이모달 트램의 주행을 모의하고, CNG 하이브리드 추진계에 대한 성능을 분석한다.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.494-502
• /
• 2011

바이모달 저상굴절 트램은 자동운전으로 일반도로와 전용구간을 주행할 수 있는 고무차륜방식의 저상굴절 차량으로서, 철도의 정시성과 버스의 접근성을 동시에 구현할 수 있는 신교통수단이다. 바이모달 트램은 전자기 궤도를 사용한 자동운전, 전차륜 조향과 함께 CNG 엔진과 리튬 폴리머 배터리 팩을 사용한 친환경 직렬형 하이브리드 추진시스템을 사용한다. 본 논문에서는 바이모달 트램의 직렬형 하이브리드 추진시스템 개발에 대해 기술하고 시험선및 일반도로에서 수행된 시험 결과를 분석한다. 또한 바이모달 트램 추진장치의 튜닝 및 시험데이터 취득을 위해 개발된 계측장비의 구성 및 동작방식에 대해 설명한다. 시작차량에 설치된 계측장비의 데이터를 기초로 전용 시험 선과 일반도로에서 주행시 직렬형 하이브리드 추진시스템의 동작을 확인하며, 차량의 연비 및 엔진 효율을 계산한다.

• 한국추진공학회지
• /
• 제25권1호
• /
• pp.68-76
• /
• 2021

본 연구에서 대상으로 삼은 직렬 하이브리드 시스템은 무인기용으로 왕복엔진, 발전기, 배터리를 주 동력원으로 사용한다. 발전기는 왕복엔진의 구동축에 직결되며, 왕복엔진-발전기 세트의 운용 특성은 지상통합시험을 통해 확인하였다. 본 연구에서는 해당 시험 결과를 바탕으로 왕복엔진-발전기 출력과 배터리 출력을 효율적으로 사용하기 위한 제어로직을 제시하였고, 로직에 따른 왕복엔진-발전기와 배터리의 출력 변동은 시뮬레이션을 통해 확인하였다. 그 결과, 발전기 출력은 제시된 제어로직에 의해 배터리 출력과 함께 추진요구전력을 공급함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.225-232
• /
• 2013

In this paper, the study was conducted on the subject of the hybrid electric vehicles used by the military, and optimized the propulsion system for fuel economy considering energy supply to the mission equipments. For the analysis of the vehicles, a method based on the geometry and some assumptions was applied with basic vehicle dynamics. The sources of energy supply in the military hybrid electric vehicles are an engine, a battery and an ultra-capacitor. The optimal operation point among an engine, a battery and an ultra-capacitor can be found by minimizing energy consumption of driving power train and mission equipments. In the study, it was possible to find the optimal propulsion system by comparing fuel efficiency of the vehicles during the driving cycle.