• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• Water for future
• /
• v.29 no.6
• /
• pp.179-188
• /
• 1996

The chronical sequences of daily precipitation are of great practical importance in the planning and operational processes of water resources system. A sequence of days with alternate dry day and wet day can be generated by two state Markov chain model that establish the subsequent daily state as wet or dry by previously calculated vconditional probabilities depending on the state of previous day. In this study, a synthetic generation model for obtaining the daily precipitation series is presented by classifying the precipitation amount in wet days into multi-states. To apply multi-state Markov chain model, the daily precipitation amounts for wet day are rearranged by grouping into thirty states with intervals for each state. Conditional probabilities as transition probability matrix are estimated from the computational scheme for stepping from the precipitation on one day to that on the following day. Statistical comparisons were made between the historical and synthesized chracteristics of daily precipitation series. From the results, it is shown that the proposed method is available to generate and simulate the daily precipitation series with fair accuracy and conserve the general statistical properties of historical precipitation series.

• Animal cells and systems
• /
• v.3 no.3
• /
• pp.319-329
• /
• 1999

Onset of female puberty follows a series of prepubertal cellular and molecular events including changes of synaptic plasticity, synthetic and releasing activity and gene expression. Dramatic increase of gonadal steroid level is one of the most prominent changes before the onset of puberty. Based on the importance of steroid feedback upon the hypothalamus, we adopted an estrogen sterilized rat (ESR) model where 100 ng of 17$\eta$-estradiol were administered into neonatal pubs for 7 days after birth. To identify genes involved in the onset of female puberty, we applied PCR differential display using RNA samples derived from ESR and control rat hypothalami. About 100 out of more than 1000 RNA species examined displayed differential expression patterns between a 60-day old control rat and ESR. Sequence analysis of differentially amplified PCR products showed homology with genes such as mouse kinesin superfamily-associated protein 3 (KAP3) and several cDNAs previously described by others in mouse and human tissues. Several gene products such as 2-1 and 8-1 corresponded to novel DNA sequences. We analyzed mRNA levels of KAP3, 2-1 and 8-1 genes in the hypothalami derived from neonatal, 6-, 28-, 31-, and 40-day old rats. Northern blot analysis showed that mRNAs of KAP3, 2-1 and 8-1 genes were markedly increased before the initiation of puberty. Neonatal treatment of estrogen clearly inhibited prepubertal increases in KAP3, 2-1 and 8-1 mRNA levels. Therefore, these genes may play important roles in the initiation of hypothalamic puberty. In addition, intracerebroventricular (icv) injection of antisense KAP3 oligodeoxynucleotide (ODN) clearly delayed puberty initiation determined by vaginal opening, which further confirmed that KAP3 plays an important role in the regulation of puberty initiation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.599-611
• /
• 2018

This study develops a training program for vocational high school students. This study implemented the ADDIE teaching-learning model and was conducted in the sequence of analyses, design, development, implementation and evaluation. In the analysis phase, the existing studies related to vocational competency training were analyzed along with an analysis of the current education programs and suitability assessment. Based on the analysis, the education program was designed and contents were determined. The program consisted of 5 chapters and 17 unit hours of instruction. Reigeluth's (1987) theory was used as the framework for organizing educational materials in the development phase. The programs were implemented on students and evaluated by students as well as experts. Students evaluated the program in terms of the degree of motivation for learning, comprehension of learning content, perceptions of lessons in classes as well as the advantages and disadvantages of the program. Experts evaluated the program in terms of program validity. The results indicate the developed program was useful for training students vocational competencies as shop managers. This study contributes to the field of fashion education, by presenting an example of systematic development of an educational program in connection with industry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.1
• /
• pp.1-7
• /
• 2018

Information on the patterns of genetic diversity and population structure is essential for the rational use and efficient management of germplasms; accurate information aids in monitoring germplasms, and can also be used to predict potential genetic gains. In this study, we assessed genetic diversity, focusing on Korean rice accessions for theand their sustainable conserved diversity. Using DNA profiling with 12 simple sequence repeat (SSR) markers, we detected a total of 333 alleles among 2,016 accessions. The number of alleles ranged from 21 to 53, with an average of 27.8. Average polymorphism information content was 0.797, with the lowest being 0.667 and the highest 0.940. CA cluster analysis and the model-based population structure revealed two main groups that could be subdivided into five subgroups. Analysis of the molecular variance study based on the SSR profile data showed 5% variance among the profiles, whereas we recorded 93% variance among individuals and 2% variance within individuals. Specifically, the utilized diversity for of the breeding program is restricted in that cultivars were located in limited clades. These results revealed that preserving the diversity of Korean landraces could be useful sources for breeding new rice cultivars, and cwould be the basis for the sustainable conservation and utilization of a Korean rice germplasm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7473-7482
• /
• 2013

The G-protein coupled receptor 87 (GPR87) is a recently discovered orphan GPCR which means that the search of their endogenous ligands has been a novel challenge. GPR87 has been shown to be overexpressed in squamous cell carcinomas (SCCs) or adenocarcinomas in lungs and bladder. The 3D structure of GPR87 was here modeled using two templates (2VT4 and 2ZIY) by a threading method. Functional assignment of GPR87 by SVM revealed that along with transporter activity, various novel functions were predicted. The 3D structure was further validated by comparison with structural features of the templates through Verify-3D, ProSA and ERRAT for determining correct stereochemical parameters. The resulting model was evaluated by Ramachandran plot and good 3D structure compatibility was evidenced by DOPE score. Molecular dynamics simulation and solvation of protein were studied through explicit spherical boundaries with a harmonic restraint membrane water system. A DRY-motif (Asp-Arg-Tyr sequence) was found at the end of transmembrane helix3, where GPCR binds and thus activation of signals is transduced. In a search for better inhibitors of GPR87, in silico modification of some substrate ligands was carried out to form polar interactions with Arg115 and Lys296. Thus, this study provides early insights into the structure of a major drug target for SCCs.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.235-244
• /
• 2000

This paper addresses a new method for constructing surface representation of 3D structures from a sequence of tomographic cross-sectional images, Firstly, we propose cell-boundary representation by transforming the cuberille space into cell space. A cell-boundary representation consists of a set of boundary cells with their 1-voxel configurations, and can compactly describe binary volumetric data. Secondly, to produce external surface from the cell-boundary representation, we define 19 modeling primitives (MP) including volumetric, planar and linear groups. Surface polygons are created from those modeling primitives using a simple table look-up operation. Comparing with previous method such as Marching Cube or PVP algorithm, our method is robust and does not make any crack in resulting surface model. Hardware implementation is expected to be easy because our algorithm is simple(scan-line), efficient and guarantees data locality in computation time.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Journal of the Korean School Mathematics Society
• /
• v.14 no.4
• /
• pp.477-490
• /
• 2011

The concept of pedagogical content knowledge (PCK) has been developed and expanded to identify essential components of mathematical knowledge for teaching (MKT) by Ball and her colleagues (2008). This study proposes an alternative perspective to view MKT focusing on key developmental understandings (KDUs) that carry through an instructional sequence, that are foundational for learning other ideas. In this study we provide constructive components of KDUs in fraction multiplication by focusing on the constructs of 'three-level-of-units structure' and 'recursive partitioning operation'. Expecially, our participating preservice elementary teacher, Jane, demonstrated that recursive partitioning operations with her length model played a significant role as a KDU in fraction multiplication.

• Journal of The Korean Association For Science Education
• /
• v.13 no.1
• /
• pp.31-47
• /
• 1993

This study was intended to find the characteristics of the middle school students' thinking processes and problem spaces when they solved the physics problems. Ten ninth grade students in Chon-Buk Do, Korea were participated in this study. The researcher investigated their thinking processes in solving 5 physics problems on electric circuit. "Thinking aloud" method was used as a research method. The students' thinking processes were recorded using an audio tape recorder and transfered into protocols. The protocols were analyzed by problem solving process coding system which was developed by Lee(1987) on the basis of Larkin's problem solving process model. The results are as follows : (1) On the average 2.85 items were solved among 5 test items, and only one person could solve all of the items correctly. (2) Problems were solved in sequence of understanding the problem, planning, carrying out the plan, and evaluating steps regardless of the problem difficulty. (3) In regard to the thinking process steps, there was no difference between the good solvers and the poor ones. But in the detail performance of problem solving, the former was different from the latter in respect with using the design of general solving procedure. (4) The basic problem spaces by the item analysis were divided into two classes. One was the problem space by using Qualitative approach in problem solving, and the other was one by using Quantitative approach. As novices in physics problem solving, most of the students used the problem space by using the Quantitative approach.