• Hwankyungkyoyuk
• /
• v.14 no.1
• /
• pp.19-31
• /
• 2001

This study examined the effect of environmental alteration and prompts on recycling behavior. An A-B-BC with a control condition design was employed. Subjects in this study were college students, professors, and employees at a university building. After a baseline phase, environmental alteration was I effect in the next phase and both environmental alteration and prompts were in effect in the final phase for the control condition. The environmental alteration consisted of providing four separation containers for the paper cups, cans recyclable paper, and the disposable on each floor in the building. The prompts consisted of providing the information about the importance of environmental preservation and how to separate the materials in the appropriate containers using an information board and pamphlets. The dependent variables were (1) the number of cans collected in can container, (2) the number of paper cups collected in cup container, (3) the rate of correct separation of cans, (4) the rate of correct separation of paper cups, and (5) the weight of disposable. The rates of correct separations of cans and paper cups were obtained by calculating the percentage of thenumber of recyclable cans and paper cups in the corresponding containers. The results indicated that environmental alteration had positive effects on all the dependent variables. Also, when the prompts were added to the environmental alteration, the incremental effect of the prompts was demonstrated. The implications and limitations of theses findings were discussed and the direction of future studies was also proposed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.56-65
• /
• 1989

In this paper, a new model is presented which characterizs the coupling of the radiating edges between two rectangular microstrip patch antennas. This model, namely Radiating Edges-Coupling (REC) model, is derived from the equivalent circuit of the slitted parallel-plate waveguide filled with homogeneous dielectric. Applying the REC model to two coupled rectangular microstrip patch antennas, we obtain numerical S-parameter values of |$S_{11}$| and |$S_{12}$|for the various coupling separations, $S_e$=0.5, 1.0, 1.5, and 2.0mm. Theoretical results are in fairly good agreement with experimental results.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.51-52
• /
• 1994

High permeability, selectivity and stability are the basic properties also required for membrane gas separations. The $CO_2$ separation by liquid membranes has been developed as a new technique to improve the permeability and selectivity of polymeric membranes. Sirkar et al.(1) have atlempted the hollow-fiber contained liquid membrane technique under four different operational modes, and permeation models have been proposed for all modes. Compared to a conventional liquid membrane, the diffusional resistance decreased by the work of Teramoto et al.(2), who referred to a moving liquid membrane. Recently, Shelekhin and Beckman (3) considered the possibility of combining absorption and membrane separation processes in one integrated system called a membrane absorber. Their analysis could be predicted effectively the performance of flat sheet membrane, however, there are restrictions for considering a flow effect. The gas absorption rate is determined by both an interfacial area and a mass transfer coefficient. It can be easily understood that although the mass transfer coefficients in hollow fiber modules are smaller than in conventional contactors, the substantial increase of the interfacial area can result in a more efficient absorber (4). In order to predict a performance in the general system of hollow-fiber membrane absorber, a gas-liquid mass transfor should be investigated inevitably. The influence of liquid velocity on both a mass transfer and a performance will be described, and then compared with experimental results. A present study is attempted to provide the fundamentals for understanding aspects of promising a hollow-fiber membrane absorber.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.259-265
• /
• 2002

The cure kinetics of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer, poly(dimmer acid-co-alkyl polyamine), were studied using differential scanning calorimetry (DSC) under isothermal condition. On increasing the amount of polyamide copolymer in the blends, the reaction rate was increased and the final cure conversion was decreased. Lower values of final cure conversions in the epoxy/(polyamide copolymer) blends indicate that polyamide hinders the cure reaction between the epoxy and the curing agent. The value of the reaction order, m, for the initial autocatalytic reaction was not affected by blending polyamide copolymer with epoxy resin, and the value was approximately 1.3, whereas the reaction order, n, for the general n-th order of reaction was increased by increasing the amount of polyamide copolymer in the blends, and the value increased from 1.6 to 4.0. A diffusion-controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/anhydride/(polyamide copolymer) blends. Complete miscibility was observed in the uncured blends of epoxy/(polyamide copolymer) up to 120 $^{\circ}C$, but phase separations occurred in the early stages of the curing process at higher temperatures than 120 "C. During the curing process, the cure reaction involving the functional group in polyamide copolymer was detected on a DSC thermogram.gram.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.140-146
• /
• 2002

The fluid induced vibration (FIV) phenomena of a 2-D.O.F airfoil system have been investigated in low Reynolds number incompressible flow region. Unsteady flows with viscosity are computed using two-dimensional incompressible Navier-stokes code. To validate developed Navier-Stokes code, steady and unsteady flow fields around airfoil are analyzed. The present fluid/structure interaction analysis is based on the most accurate computational approach with computational fluid dynamics (CSD) and computational structural dynamics (CSD) techniques. The highly nonlinear fluid/structure interaction phenomena due to severe flow separations have been analyzed fur the low Reynolds region (R$_{N}$ =500~5000) that has a dominancy of flow viscosity. The effect of R$_{N}$ on the fluid/structure coupled vibration instability of 2-DOF airfoil system is presented and the effect of initial angle of attack on the dynamic instability are also shown.own.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.481-487
• /
• 2010

Recently membrane-based gas separation has attracted a great deal of research interests due to the growing demands on greener technologies. Current membrane-based gas separation is dominant by polymer membranes and limited mostly to non-condensable gases even though condensable gases such hydrocarbon isomers are much more attractive. This is primarily due to the limitations of polymer materials. Zeolites and their composites with polymer can offer alternative to current polymeric membranes owing to their superior separation and chemical/thermal properties. This review is intended to provide a brief overview on zeolite and zeolite/polymer composite membranes for gas separation applications.

• Korean Journal of Food Science and Technology
• /
• v.1 no.1
• /
• pp.78-84
• /
• 1969

An attempt has been made to investigate the possible occurrence of aflatoxins, a group of micotoxin which are toxic metabolites produced by Aspergillus flavus, and aflatoxin like substances in fungal fermented soybean products such as meju and soybean paste. Chloroform extracts from 15 samples which has been defated with petroleum ether are subjected to separations with thin-layer chromatography on silica gel washed with methanol prior to film coating, improves the chromatographic separation and ultraviolet absorption spectral identification. In addition to fluorescencing spot having an Rf value which is same as aflatoxin $B_1$, many of the fluorescencing spots have been occurred in every sample examined. Each fluorescencing spot is scratched and the ethanol extracts are subjected to further separation with thin-layer chromatography. Each fluorescence substance is eluted with ultra violet transparent absolute ethanol and the ultraviolet absorption spectra are checked. None of the absorption curve of eluates shsow accordance with the curve of aflatoxin. 2, 4-Dinitrophenyl hydrazine reagent, Tollen's reagent and ninhydrin reagent are applied on the chromatogram- The data show that aflatoxin is not present in any of the fungal preparations examined.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1035-1039
• /
• 1998

Phase separation is the typical phenomenon in protein-polysaccharide mixtures because of thermodynamic incompatibility between two macromolecules. Phase separations of casein-alginate-water systems were investigated by using phase diagram under varying pH (6, 8 and 10) and NaCl concentrations (0, 0.25 and 0.5 M). Incompatibility decreased with increasing pH and decreasing NaCl concentration. Molecular weight of alginates did not significantly affect the phase diagram of casein-alginate-water systems. The results strongly suggested that compatibility of casein and alginate involved electrostatic interactions.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.65-74
• /
• 1985

Aspergillus niger IMI 41873 was cultured by the method of synchronous and submerged culture. Its sporulation occurred in the culture. Ribonucleic acids were extracted at each stage of life cycle. These RNAs were digested, separated and determined by P.E.I. cellulose TLC and HPLC methods. The levels of ribonucleic acids in sporulating mycelia were higher than those of conidiophore and phialide forming mycelia. Inosine 5-monophosphate and adenosine 5-monophosphate derivatives were found in HPLC separations. The levels of inosine 5-monophosphate and adenosine 5-monophosphate derivatives per ribonucleic acid were constant through differentiation. After the standard purine necleosides and boiling water extracts from A. bisporus, F. velutipes and L. edodes were added into the culture, their effects on sporulation were examined. Sporulation was greatly enhanced in each adding experiment.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.48-52
• /
• 2015

Control of polymer conformations in heterogeneous confinement plays an important role in natural and engineering processes. We present a simulation study on the conformational structure and dynamics of a single, flexible polymer in a dense array of nanoposts with different sizes and separations, especially, when the volume of the interstitial space formed between four nanoposts is less than the size of the polymer chain. When a polymer is placed in the array of nanoposts, the size of polymer increases compared with that in the absence of nanoposts due to the confinement effect. It is shown that when a polymer is confined in the array of nanoposts the chain is elongated in the direction parallel to the nanoposts. As the interstitial volume between four nanoposts decreases either by increasing the nanopost diameter or by decreasing the separation between nanoposts, the chain elongation becomes more pronounced. On the contrary, the polymer size varies in a non-monotonic fashion, with an initial elongation followed by a chain contraction, as the interstitial volume is reduced both by increasing the nanopost diameter and decreasing the separation at the same time while keeping constant the width of the passageway between two nanoposts. The simulation analysis shows that the non-monotonic dependence of polymer size is determined by interplay between the chain alignment along the nanoposts in each interstitial volume and the chain spreading through passageways over several interstitial volume.