• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1136-1142
• /
• 2001

$Zn_xSr_{1-x}S$ thin films were prepared in the whole composition range by rf sputtering, using powder targets of a mixture of ZnS and SrS with the required mole fraction. The possibility of existence of $Zn_xSr_{1-x}S$ solid solutions was systematically investigated from the results of thin film growth, in terms of structural, optical characteristics and the chemical bonding of the constituent atoms. The XRD, XPS and optical results made it clear that the solid solutions with a single-phased zincblende structure and a single-phased rocksalt structure were formed at $0.86~0.93{\leq}x{\leq}1\;and\;0{\leq}x{\leq}0.29$, respectively. The miscibility gap, including phase separation regions was found to exist in $0.3{\leq}x{\leq}0.86~0.91$, in which lattice constants, binding energy and absorption edges kept almost constant by the same values as those at border compositions. The experimental results on phase transition agreed well with the fraction of ionic character fi based on the Phillips' dielectric theory.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.51-57
• /
• 2010

As a recycling of Si sludge from Si wafer process, a Si-SiC-CuO-C composite material was synthesized and investigated as an anode material for lithium batteries. The Si sludge consisted of Si, SiC, machine oil, and metallic impurities. The oil and metal impurities was removed by organic washing, magnetic separation, and acid washing. The Si-SiC-CuO-C composite from the recovered Si-SiC mixture was prepared by high-energy mechanical milling. According to the electrochemical tests such as charge-discharge capacity and cycling behavior, it showed the improved cycle performance. The SiC and CuO-related phases were presumed to restrain the volume expansion of the anode and Fe, however, should be removed below 10 ppm prior to synthesis of the composite because it caused the capacity loss of the active material itself.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.55-62
• /
• 1975

In the studies of characterization of crystal prototoxin isolated from Bacillus thuringinensis var. alesti and its bioassay to the silkworm larvae, Bombyx mori L., the following results were obtained. 1. The complete lysis of bacteria grown on the nutrient agar at 30$^{\circ}C$ in an incubator took 30 days, but the period could be reduced by a half in a devised broth media in a fermentation jar. 2. The protein toxin extracted directly from a mixture of crystals and spores without separation of crystals and spores was pure as same as the protein toxin extracted from only crysals separated. 3. By SLS polyacrylamide gel electrophoresis of prototoxin released from crystals in alkali (pH 9.5) three different proteins in molecular weights of 120,000, 87,000, 74,000 were separated. 4. In the bioassay of the toxin to the silkworm larvae, LD$\sub$50/ per gram of the larvae in the 4th instar was 0.080 $\mu\textrm{g}$.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.74-82
• /
• 2001

By using a phenomenological approach, model equations incorporating the resistance-in¬series concept were established to evaluate quantitatively concentration polarization in the boundary layer in feed adjacent to the membrane surface in the vapor permeation and separation of volatile organic compounds (VOCS)/$N_2$ mixture through po]y(dimethylsiloxane) (PDMS) membrane. The vapor permeations of various VOCS/$N_2$ mixtures through PDMS membrane were carried out at various feed flow rates. Chlorinated hydrocarbons, such as, methylene chloride, chlorofonn, 1,2-clichloroethane and 1,1,2-trichloroethane were used as organic vapor. By fitting the model equations to the experimental penneation data. the model parameters were detennined. respectively. Both the mass transfer coefficient of VOC across tbe boundary layer and concentration polarization modulus as a measure of the extent of concentration polarization were eitimated Quantitatively by the mooe1 equations with the determined model parameters. From the analysis on the detennined model parameters, the boundary layer resistance due to the concentration polarization of VOCs component was found to be more significant when the condensability of voe was greater. This study seeks to emphasize the importance of the boundary resistance on the vapor penneation of the vapor/gas mixtures with high permeability and high selectivity towards the minor component VOC.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.431-438
• /
• 1995

Functional imaging based on the susceptibility only is achieved by separation of the susceptibility effect from the mixture of flow effect by use of a tailored RF pulse in conjunction with gradient echo sequence. Using the tailored RF pulse the susceptibility enhanced functional imaging appears to be explicitly related to the deoxygenation processes, while in the conventional gradient echo technique functional contrast on $T2^{*}$ effect images appear to be mixed with a significant fraction of blood flow (in- flow) signals of both arterial as well as venous bloods due to the nature of the fast sequence employed with the gradient echo technique. In this paper, using the tailored RF pulses, one can unambiguously separate the susceptibility and flow effects in functional imaging. Since the signal obtained can be made sufficiently high and represents oxygenation process more accurately, it seems possible to study quantitative oxygen metabolisms in brain function hitherto difficult to do with other gradient echo techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.660-664
• /
• 2001

$Zn_xSr_{1-x}S$ thin films were prepared in the whole composition range by rf sputtering, using powder targets of a mixture of ZnS and SrS with the required mole fraction. The possibility of existence of $Zn_xSr_{1-x}S$ solid solutions was systematically investigated from the results of thin film growth, in terns of structural, optical characteristics and the chemical bonding of the constituent atoms. The XRD, XPS and optical results made it clear that the solid solutions with a single-phased zincblende structure and a single-phased rocksalt structure were formed at $0.86~0.93{\leq}x{\leq}1$ and $0{\leq}x{\leq}0.29$, respectively. The miscibility gap, including phase separation regions was found to exist in $0.3{\leq}x{\leq}0.86~0.91$, in which lattice constants, binding energy and absorption edges kept almost constant by the same values as those at border compositions. The experimental results on phase transition agreed well with the fraction of ionic character $f_{i}$ based on the Phillips'dielectric theory.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.286-290
• /
• 2007

The esterification efficiency of several ionic liquids has been investigated to determine the feasibility for the conversion of free fatty acids to alkylester. Five ionic liquid catalysts having strong acidity, BPC[$AlCl_3$], BMIM[$Bf_4$], BMIM[$Pf_6$], EMIM[$Ntf_2$], BMIM[Otf], have been employed in this work. BPC[$AlCl_3$] has the highest esterification efficiency among the ionic liquid catalysts. Over 90% conversion efficiency has been achieved in the esterification of the simulated used cooking oil by BPC[$AlCl_3$] with two hours reaction time. Since BPC[$AlCl_3$] has several advantages such as high esterification activity, ease of separation from reaction mixture and reusability after treatment procedure, it will be a promising catalyst for the conversion of free fatty acids to esters in waste fats.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2003

Abstract: The surfaces of poly (methylpentene)(PMP) were modified by Af and $NH_3$ plasma treatment, and their effects on permeation characteristics were investigated. The mole ratio of O/C in the surface was increased with Ar plasma treatment and consequently the surface became hydrophilic because of the possible formation of -OH, -COOH and C=O. The surface treated by $NH_3$ plasma also became hydrophilic due to the formation of amine and/or amide groups. The $CO_2$ permeability and its actual selectivity over N_2$ were 182 baller and 6.17 for the optimum condition of Ar-30W-6min, while 144 Baller and 6.13 for that of $NH_3$-30 W-8 min.

• Clean Technology
• /
• v.15 no.4
• /
• pp.287-294
• /
• 2009

In order to separate the fuel-grade DME from the product of a direct DME synthesise reaction, containing 19~20% of DME, an absorption column and a purification column were employed. In the DME absorption column, the flow rate of the methanol required to recover more than 99% of DME at 50 bar was estimated by the correlation obtained from the lab-scale experiments. In the DME purification column, the maximum DME recovery of 98.2% could be obtained even from the side stream at the 3rd stage above the feed stage, since the feed stream originated from the product of the absorption column had already contained a large amount of DME (20~30 mol%) and only a small amount of light products such as $CO_2$ and $N_2$ (5~10 mol%).

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.614-619
• /
• 2005

The water-soluble defoamers were fabricated by the mixing polyol, modified silicon resin, silicon resin and surfactant. For the defoamers, the various properties such as phase-separation time, viscosity and defoamerability were examined. The phase-saparation time of PPG mixtures was found to be PPG 400>PPG 3,000>PPG 1000. When PPG 1000 was mixed, mixtures represented the excellent defoamerability. The phase-saparation time of silicon resin mixtures was TSF-451-350>TSF-451-200>TSF-451-50. As more of high molecular silicon resin was mixed, the resulting mixtues showed reduced defoamerability. When the TSF-451-50 was mixed, the mixture's volume was increased because of the reduction of solubility. The modified silicon resin was smoothly dispersed in water, but the compatibility with PPG was not good. The defoamerability of surfactant was SPAN 20>SPAN 60>SPAN 80. SPAN 80 showed good miscibility for the silicon resin, but not good for YAS 6406 or PPG 1000.