• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.79-84
• /
• 2004

It is well accepted that modem emulsion explosives are intrinsically much less sensitive than traditional products such as dynamites or black powder. However, they have still been involved in a significant number of accidental explosions. In October 1975, Canadian Research, Limited's, Energetic Research Laboratory in Quebec exploded. Although explanations for the incident varied, one logical explanation was that the pump used in transporting the emulsion dead headed, thereby turning mechanical work in to frictional heating under a zero flow rate. There is a minimum pressure required for combustion(MBP) to propagate in emulsion explosives. A stable deflagration may lead to a deflagration-to-detonation transition(DDT) in emulsion explosives. Tests were also performed on sensitized sampled consisting of 6 to 21% waters as well as 1 to 11% aluminium powder. It was founded the emulsion explosives consisting of 6% waters had the lowest minimum homing pressure(MBP) of 3 bar, and the 21% waters were unable to achieve sustained homing at pressures as high as 100 bar. The aluminium contained explosives tested here displayed a MBP higher than that of without emulsion. It appears that this test may offer a firm ground for the classification of emulsion explosives in view of the regulating the hazards associated with the various process used for their manufacturing and transport.

• BMB Reports
• /
• v.46 no.5
• /
• pp.270-275
• /
• 2013

It is essential to analyze rare mutations in many fields of biomedical research. However, the detection of rare mutations is usually failed due to the interference of predominant wild-type DNA surrounded. Herein we describe a sensitive and facile method of detecting rare point mutation on the basis of allele-specific amplification in emulsion PCR. The identification and selective amplification of rare mutation are accomplished in one-pot reaction. The allele-specific primers coupled on magnetic beads allow the exclusive amplification and enrichment of the mutant amplicons. The productive beads bearing mutant amplicons are subsequently stained with the fluorescent dyes. Thus, the rare point mutations with a percentage as low as 0.1%, can be detected by fluorescent analysis. The relative percentages of mutation among different samples can be roughly accessed by counting the fraction of fluorescent positive beads through flow cytometry.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.182-187
• /
• 2012

In making emulsion-type pressure sensitive adhesive (PSA), environmentally friendly sorbitan nonionic surfactants having various chemical structures were prepared and used to find out the possibility of substituting the traditional nonyl-phenyl nonionic surfactant (NPE40) by comparing their adhesive properties. Results exhibited that the PSA used NSR10-series and Tween 60 showed better adhesive properties in initial ball tack, peel strength and holding power than those of NPE40. The reason for this is their particular chemical structure and the proper ratio of hydrophobic groups to the ethylene oxide groups.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1425-1430
• /
• 2024

This study develops superheated emulsion detectors that are both sensitive to fast neutrons, and thermal neutrons owing to the exergonic ⁶₃Li(n, α)³₁H capture reaction caused by the ⁶Li-containing compound dispersed throughout the gel-like medium. The experimental research was conducted on two SEDs. One detector was an ordinary Freon-12 detector and the other was a Freon-12 detector containing 3.4 % (by weight) LiCl. In order to investigate the sensitivity of lithium-containing SEDs to thermal neutrons, two types of SEDs were simultaneously exposed to various flux levels of thermal neutrons from ²⁴¹Am-Be neutron source inside a cylindrical tank filled with water. A Boron-lined proportional counter was used to estimate the thermal neutron flux and the relevant MCNP code was developed for flux and dose calculations in the prepared set-up around ²⁴¹Am-Be source. The results demonstrate that there is a proportional relationship between the variations of SED response and the change in thermal neutron flux and dose. Also, the sensitivity of SED was estimated.

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.156-161
• /
• 2020

Waterborne pressure sensitive adhesives (PSA) has been received much attentions from both academia and industries as an environmental friendly-technology because it can significantly reduce use of hazardous organic volatile solvents. However, in the process of the mass production of waterborne PSAs, hazardous phenol type amphiphilic compounds have essentially been used as surfactants for the emulsion polymerization. For the reason, tremendous research efforts have been made to develop environment-friendly organic surfactant which can replace the phenol type surfactants. In this study, we verify the potential of a new class of surfactants based on the styrenated phenol derivatives as an alternative to the phenol type surfactants.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.47-54
• /
• 2015

PURPOSES : The objective of this study is to evaluate the early adhesive characteristic of asphalt emulsions, including polymer-modified emulsions, for chip seals using the surface energy concept, the bitumen bond strength (BBS) test, and the Vialit test. METHODS : Two general methods, the BBS test and Vialit test, were applied to investigate the bond strength and the aggregate loss, respectively. A new theory, the surface free energy (SFE) theory, was used to evaluate the adhesive characteristic between the emulsion and the aggregate. Based on the theory, the contact angles were measured, and then the surface energy components were calculated. Using those components, the work of adhesion (Wa) was calculated for each emulsion. To ensure reliable results, all the tests were performed under the same conditions, i.e., at $25^{\circ}C$ for 240 minutes of curing time. For the materials, three emulsions (CRS-2, CRS-2L, and CRS-2P) and one aggregate type (granite) were employed. RESULTS AND CONCLUSIONS : Under the same conditions, the modified emulsions showed better adhesive characteristics and curing behaviors than the unmodified emulsions. In addition, there was no significant difference between the various modified emulsions. One of the important findings is that the analysis by Wa presents more sensitive results than other methods. The results of the Wa showed that the CRS-2P emulsion has the best adhesive characteristics. Consequently, the use of modified emulsions for chip seals could prevent aggregate loss and allow open traffic earlier.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.85-85
• /
• 2006

The micellization behavior and the metal-nanoparticle formation in PDEAEMA-b-PHEGMA double hydrophilic block copolymers are investigated. The hydrophobic PDEAEMA block is pH-sensitive: at low pH it can be protonated and it becomes hydrophilic, leading to molecular solubility, whereas at higher pH micelles are formed; the behavior is studied by DLS, NMR and AFM. In these micellar nanoreactors, metal nanorystals nucleate and grow upon reduction with sizes in the range of a few nm's as observed by TEM and XRD. Similarly, metal nanocrystals can be formed within pH-sensitive microgels (${\sim}250nm$ in diameter), synthesized by emulsion copolymerization of DEAEMA, which also exhibit reversible swelling properties in water by adjusting the pH.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.343-347
• /
• 2013

BACKGROUND: Control of alternate bearing satsuma mandarin in Jeju is very important to maintain the optimum price of fruit and get the sustainable income of farmers. Unlike orange, Satsuma mandarin is well known to sensitive on alternate bearing. We carried out the experiment to know the effect of foliar application of $GA_3$ on the flowering and fruit quality of satsuma mandarin (C. unshiu Marc. cv. Miyagawa). METHODS AND RESULTS: To experiment, the treatments consist of control, different concentration of $GA_3$ (25, 50 and 100 mg/L), machine oil emulsion 100 times and mixture of various concentration of $GA_3$ (25 and 50 mg/L) with machine oil emulsion 100 times which it was applied on 15 year-old Miyagawa satsuma mandarin at December 29, 2011. Foliar application of $GA_3$ in winter reduced the flowering of satsuma mandarin. Flower-leaf ratio was significantly reduced at 100 mg/L $GA_3$, while no differences observed in low concentration of $GA_3$ (25 and 50 mg/L). However, it was significantly decreased to 0.19 in application of $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixture. Number of leaves per fruit was significantly increased as foliar application of $GA_3$ also it reduced the fruits remarkably. Soluble solid contents and Hunter's a of peel color ratio showed no difference among $GA_3$ single treatments, but it was reduced in $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixtures significantly. From the results, it has been found that higher $GA_3$ concentration can reduce the number of flowers on the alternate bearing of satsuma mandarin. However, it was found that lower concentration of $GA_3$ with machine oil emulsion mixture 100 times can reduce flowering. CONCLUSION(S): The foliar application of $GA_3$ (100 mg/L) can alleviate alternate beraring. Also, mixture of lower concentration of $GA_3$ with machine oil emulsion 100 times can retard flowering more significantly while it needs further confirmation.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.523-530
• /
• 1999

Acrylic pressure-sensitive adhesive has been made utilizing organic solvents, but nowadays it is made by solvent-free system due to environmental problems. In this study, emulsion polymerization were carried out at $40^{\circ}C$ with methacrylic acid(MAA), n-butyl acrylate(n-BA) and 2-ethylhexyl acrylate(2-EHA) as monomers in the presence of anionic(sodium dodecyl sulfate, SDS) and nonionic(ethylene oxide types) surfactant mixtures. The overall conversion of the polymerization reaction in a mixed surfactant system was found to be higher than that in a single surfactant system. Emulsion stability in mixed or anionic surfactant systems was found to be over 12 week, which was better than that in nonionic surfactant system. Emulsion particle size decreased as surfactant content increased. The Tg and molecular weight of emulsion polymer were inependent of the type, the amount and the mixing ratio of surfactant. Based on the results of stability and peel strength, the optimum nonionic surfactant ratio in total 4 g of surfactant mixture systems is found to be 40~60% by weight where the nonionic surfactant has 50 ethylene oxide groups and 16~18 carbon atoms in hydrophobic alkyl chain.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.289-297
• /
• 2005

In order to improve resistant properties of water-borne acrylic pressure sensitive adhesives(PSAs) for automobiles, this study was carried out. Removable PSAs for automobiles were synthesized by emulsion polymerization of monomers, n-butyl acrylate(BA), n-butyl methacrylate(BMA), acrylonitrile(AN), acrylic acid(AA) and 2-hydroxyethyl methacrylate(2-HEMA), and AA and 2-HEMA could act as functional monomers for crosslink. Emulsion polymerization was carried out in a semi-batch type reactor. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, water resistance increased with the amount of BMA, however, the effect of BMA content on the water resistance was insignificant at a range of over 14 wt%. The water resistance also increased with the amount of functional monomers, AA and 2-HEMA. The prepared PSAs satisfied all the standard for automobiles except heat resistance. However, the heat resistance comes nearly up to the standard. Also, acid resistance, alkali resistance and smoke resistance of the prepared PSAs satisfied with the standard.