• 한국터널지하공간학회 논문집
• /
• 제23권1호
• /
• pp.25-36
• /
• 2021

온실가스 배출량을 줄이기 위해 내연기관 자동차에 대한 제한을 두고, 친환경자동차 보급 확대 정책을 내놓고 있다. 수소 전기자동차의 수소는 가연 범위 및 폭발 범위가 넓고, 폭발화염 전파속도가 매우 빠른 가연성 가스이기 때문에, 제조, 수송, 저장 시 누출, 확산, 점화 및 폭발 등의 위험성을 가지고 있다. 수소전기자동차의 연료탱크에는 폭발 등 위험성을 감소시키기 위해 온도감응식 압력방출장치(Thermally activate Pressure Relief Device, TPRD)가 있어, 사고가 발생했을 경우 폭발, 화재 등이 발생하기 전에 탱크 내부의 수소를 밖으로 방출한다. 그러나 지하주차장이나 터널과 같은 반밀폐공간에서 사고가 발생할 경우 공간 내 기류의 유동이 개방된 공간보다 미미하기 때문에 TPRD로부터 방출된 수소가스의 농도가 폭발하한계 이상으로 누적될 수 있는 등 문제가 발생할 수 있다. 따라서 본 연구에서는 TPRD의 노즐의 직경에 따라 시간에 따른 수소의 누출 유량을 분석하고, 반밀폐공간에서 수소가 누출될 경우 수소 농도변화를 수치해석으로 검토하였다. 노즐의 직경은 1 mm, 2.5 mm, 5 mm로 검토를 하였으며, 노즐 직경에 따라 지하주차장 내의 수소농도는 노즐의 직경이 클수록 빠른 시간에 농도가 높아지며, 최대값 또한 노즐 직경이 클수록 큰 것으로 분석되었다. 기류가 정체된 지하주차장에서는 노즐 주변에서 폭발하한계 이상의 수소 농도가 분포하는 것으로 분석되었으며, 폭발상한계를 넘지는 않는 것으로 분석되었다.

• International Journal of Knowledge Content Development & Technology
• /
• 제9권1호
• /
• pp.19-42
• /
• 2019

This study examined activities involving the finding, organizing, managing, and re-finding of information by knowledge workers in Kuwait. This research also conducted a review of the tools needed for effective personal information management (PIM) and assessed perceptions about improving PIM through Internet use. Data were collected through semi-structured interviews conducted among 26 graduates of the Department of Information Studies at Kuwait University. These participants are currently employed in different sectors engaged in a variety of information-related activities. This study's findings indicated that participants gathered different types of information from a variety of sources. This information was stored using several devices and services, including desktop computers, shared drives, clouds, bookmarked websites, e-mail correspondence, and favorites lists. Participants organized information in personal folders according to categories such as subject/topic, time, project, document type, and geographical region. Preferred methods for information re-finding included searching by keyword and browsing through folders. Interviewees reported problems of information overload, fragmentation, and anxiety. Most were active in social media via mobile device, while some of them used Siri or Ask Google to retrieve information. Tools used for PIM included calendars, tasks, schedules, e-mail management tools, clouds, and social networking tools. Participants reported that the Internet helped with personal information management practices, but that some privacy issues arose in this context.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.943-966
• /
• 2016

Recently, magnetorheological elastomer (MRE) material and its devices have been developed and attracted a good deal of attention for their potentials in vibration control. Among them, a highly adaptive base isolator based on MRE was designed, fabricated and tested for real-time adaptive control of base isolated structures against a suite of earthquakes. To perfectly take advantage of this new device, an accurate and robust model should be built to characterize its nonlinearity and hysteresis for its application in structural control. This paper first proposes a novel hysteresis model, in which a nonlinear hyperbolic sine function spring is used to portray the strain stiffening phenomenon and a Voigt component is incorporated in parallel to describe the solid-material behaviours. Then the fruit fly optimization algorithm (FFOA) is employed for model parameter identification using testing data of shear force, displacement and velocity obtained from different loading conditions. The relationships between model parameters and applied current are also explored to obtain a current-dependent generalized model for the control application. Based on the proposed model of MRE base isolator, a second-order sliding mode controller is designed and applied to the device to provide a real-time feedback control of smart structures. The performance of the proposed technique is evaluated in simulation through utilizing a three-storey benchmark building model under four benchmark earthquake excitations. The results verify the effectiveness of the proposed current-dependent model and corresponding controller for semi-active control of MRE base isolator incorporated smart structures.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.359-371
• /
• 2018

Strong seismic events commonly cause large drift and deformation, and functionality failures in the superstructures. One way to prevent functionality failures is to design structures which are ductile and flexible through yielding when subjected to strong ground excitations. By developing forces that assist motion as "negative stiffness forces", yielding can be achieved. In this paper, we adopt the weakening and damping method to achieve a new approach to reduce all of the structural responses by further adjusting damping phase. A semi-active control system is adopted to perform the experiments. In this adaptation, negative stiffness forces through certain devices are used in weakening phase to reduce structural strength. Magneto-rheological (MR) dampers are then added to preserve stability of the structure. To adjust the voltage in MR dampers, an inverse model is employed in the control system to command MR dampers and generate the desired control forces, where a velocity control algorithm produces initial required control force. An extensive numerical study is conducted to evaluate proposed methodology by using the smart base-isolated benchmark building. Totally, nine control systems are examined to study proposed strategy. Based on the numerical results of seven earthquakes, the use of proposed strategy not only reduces base displacements, base accelerations and base shear but also leads to reduction of accelerations and inter story drifts of the superstructure. Numerical results shows that the usage of inverse model produces the desired regulated damping, thus improving the stability of the structure.

• 한국지능시스템학회논문지
• /
• 제17권7호
• /
• pp.875-880
• /
• 2007

자기변성유체(magnetorheological fluid)에 관한 연구는 MR 장치의 개발, MR 장치의 수학적 모델링 및 시뮬레이션, 그리고 MR 장치를 채용한 시스템의 제어 알고리즘 개발에 관한 연구로 구분된다. 시뮬레이션을 통한 제어 알고리즘 개발을 위해서는 MR 장치의 비선형 응답을 예상하기 위한 신뢰성 높은 수학적 모델이 요구된다. 또한 MR 장치 시스템을 제어하기 위해서는 제어기에서 요구하는 댐핑력을 출력하기 위한 MR 장치의 전류(또는 전압) 입력 값이 필요하며, 이 입력값을 얻기 위해서는 역댐퍼 모델이 필요하다. 이러한 이유로 MR 장치의 모델링 및 역댐퍼 모델링은 MR 장치개발의 중요한 역할을 담당하며 이에 관한 많은 연구가 요구되고 있다. 본 연구에서는 전단모드 회전형 MR 댐퍼의 모델링을 위해 개발된 MR 댐퍼를 이용하여 동특성 시험기를 제작하였으며, 전단모드 회전형 MR 댐퍼의 특성을 연구하기 위한 실험을 수행하였다. 시험기 시험결과를 통해 모델링에 필요한 시험 데이터들을 획득하였으며 다층신경망을 이용하여 전단모드 회전형 MR 댐퍼의 모델 및 역모델을 구하였다.

• Smart Structures and Systems
• /
• 제9권4호
• /
• pp.373-392
• /
• 2012

Tracking control of systems with variable stiffness hysteresis using a gain-scheduled (GS) controller is developed in this paper. Variable stiffness hysteretic system is represented as quasi linear parameter dependent system with known bounds on parameters. Assuming that the parameters can be measured or estimated in real-time, a GS controller that ensures the performance and the stability of the closed-loop system over the entire range of parameter variation is designed. The proposed method is implemented on a spring-mass system which consists of a semi-active independently variable stiffness (SAIVS) device that exhibits hysteresis and precisely controllable stiffness change in real-time. The SAIVS system with variable stiffness hysteresis is represented as quasi linear parameter varying (LPV) system with two parameters: linear time-varying stiffness (parameter with slow variation rate) and stiffness of the friction-hysteresis (parameter with high variation rate). The proposed LPV-GS controller can accommodate both slow and fast varying parameter, which was not possible with the controllers proposed in the prior studies. Effectiveness of the proposed controller is demonstrated by comparing the results with a fixed robust $\mathcal{H}_{\infty}$ controller that assumes the parameter variation as an uncertainty. Superior performance of the LPV-GS over the robust $\mathcal{H}_{\infty}$ controller is demonstrated for varying stiffness hysteresis of SAIVS device and for different ranges of tracking displacements. The LPV-GS controller is capable of adapting to any parameter changes whereas the $\mathcal{H}_{\infty}$ controller is effective only when the system parameters are in the vicinity of the nominal plant parameters for which the controller is designed. The robust $\mathcal{H}_{\infty}$ controller becomes unstable under large parameter variations but the LPV-GS will ensure stability and guarantee the desired closed-loop performance.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.77-84
• /
• 2006

최근 들어 지진발생 빈도의 증가와 더불어 초고층 빌딩, 장대교량 등과 같은 대형구조물의 경량화, 유연화로 인해 발생하는 구조물의 과도한 동적거동을 효과적으로 제어할 수 있는 제진시스템의 필요성이 증가하고 있다. 본 연구에서는 지진으로부터 구조물을 보다 효과적으로 보호하기 위해 자기장에 의해 역학적 성질을 변화시킬 수 있는 제어가 가능한 지능형재료인 자기민감 고무(Magneto-Sensitive Rubber)를 이용한 반 능동 기초격리 시스템을 제안하였다. 제안된 기초격리 시스템은 기존의 LRB(Lead-Rubber Bearing) 시스템과의 비교 분석을 통해 면진성능을 평가하였으며 이를 위해 몇 가지 역사적 지진들을 이용수치해석을 수행하였다. 제안된 자기민감 고무를 이용한 반 능동 기초격린 시스템은 기존의 수동 시스템보다 기초전단력이나 상부구조물에 가속도 전달을 차단함과 동시에 기초변위를 현저하게 감소시킬 수 있음을 보였다. 그러므로 자가민감 고무를 이용한 반 능동 기초격리 시스템은 지진으로부터 구조물을 효과적으로 보호할 수 있을 것으로 사료된다.

• 한국지진공학회논문집
• /
• 제10권6호
• /
• pp.47-56
• /
• 2006

지진응답 제어를 위하여 사장교 구조물에 장착된 준능동MR 댐퍼의 경제적 효율성 평가기법을 제안하였으며, 다양한 지반운동 특성에 대하여 비용효율성을 극대화하는 MR 댐퍼의 최적용량에 대한 분석을 수행하였다. MR 댐퍼의 비용효율성 평가를 위하여 생애주기비용 개념을 적용하였으며, 생애주기비용을 이루는 비용항목 중 손상비용의 기대값을 평가하기 위하여 지진재해로 인한 사장교의 파괴확률을 추정하였다. 사장교의 파괴로 인한 직 간접 손상비용의 규모를 매개변수로 하여 비용효율성을 평가하였다. 비용효율성 평가지수는 MR 댐퍼의 장착으로 인한 추가 투자비용과 사장교 구조물의 손상비용으로 이루어진 함수로서, 탄성받침이 사용된 기존의 설계에 대한 경제적 효율성을 나타내도록 정의하였다. 사장교의 지진응답 제어를 위하여 장착된 MR 댐퍼는 경제적으로 효율적인 대안인 것으로 나타났다. 지반운동의 특성과 손상비용 규모에 대한 MR 댐퍼의 최적 용량을 분석한 결과, 지진위험도 및 손상비용 규모가 커짐에 따라 가장 높은 비용효율성을 가지는 MR 댐퍼용량이 증가하는 것을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.341-341
• /
• 2012

Recently, oxide semi-conductor materials have been investigated as promising candidates replacing a-Si:H and poly-Si semiconductor because they have some advantages of a room-temperature process, low-cost, high performance and various applications in flexible and transparent electronics. Particularly, amorphous indium-gallium-zinc-oxide (a-IGZO) is an interesting semiconductor material for use in flexible thin film transistor (TFT) fabrication due to the high carrier mobility and low deposition temperatures. In this work, we demonstrated improvement of flexibility in IGZO TFTs, which were fabricated on polyimide (PI) substrate. At first, a thin poly-4vinyl phenol (PVP) layer was spin coated on PI substrate for making a smooth surface up to 0.3 nm, which was required to form high quality active layer. Then, Ni gate electrode of 100 nm was deposited on the bare PVP layer by e-beam evaporator using a shadow mask. The PVP and $Al_2O_3$ layers with different thicknesses were used for organic/inorganic multi gate dielectric, which were formed by spin coater and atomic layer deposition (ALD), respectively, at $200^{\circ}C$. 70 nm IGZO semiconductor layer and 70 nm Al source/drain electrodes were respectively deposited by RF magnetron sputter and thermal evaporator using shadow masks. Then, IGZO layer was annealed on a hotplate at $200^{\circ}C$ for 1 hour. Standard electrical characteristics of transistors were measured by a semiconductor parameter analyzer at room temperature in the dark and performance of devices then was also evaluated under static and dynamic mechanical deformation. The IGZO TFTs incorporating hybrid gate dielectrics showed a high flexibility compared to the device with single structural gate dielectrics. The effects of mechanical deformation on the TFT characteristics will be discussed in detail.

• 한국공간구조학회논문집
• /
• 제22권3호
• /
• pp.49-56
• /
• 2022

Tuned mass damper (TMD) is widely used to reduce dynamic responses of structures subjected to earthquake loads. A smart tuned mass damper (STMD) was proposed to increase control performance of a traditional passive TMD. A lot of research was conducted to investigate the control performance of a STMD based on analytical method. Experimental study of evaluation of control performance of a STMD was not widely conducted to date. Therefore, seismic response reduction capacity of a STMD was experimentally investigated in this study. For this purpose, a STMD was manufactured using an MR (magnetorheological) damper. A simple structure presenting dynamic characteristics of spacial roof structure was made as a test structure. A STMD was made to control vertical responses of the test structure. Two artificial ground motions and a resonance harmonic load were selected as experimental seismic excitations. Shaking table test was conducted to evaluate control performance of a STMD. Control algorithms are one of main factors affect control performance of a STMD. In this study, a groundhook algorithm that is a traditional semi-active control algorithm was selected. And fuzzy logic controller (FLC) was used to control a STMD. The FLC was optimized by multi-objective genetic algorithm. The experimental results presented that the TMD can effectively reduce seismic responses of the example structures subjected to various excitations. It was also experimentally shown that the STMD can more effectively reduce seismic responses of the example structures conpared to the passive TMD.