• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.20-29
• /
• 2001

This study was carried out to find out basic data of the various cropping systems controlling the soil environment by analysing the historical literature, the changes of cropping system and the expected income of cropping system of the upland crop. The results were summerized as follows ; 1. According to the literature of 'Gumyangjoprok' and 'Sanlimgyungjae', published on 15 to 16 century in Korea, the cropping system of barley, soybean, red bean, and millet, etc. was done together both the 'kunkyong' and 'kanjong'. 2. Since 1970s the staple food grains had been self-sufficient and the setting up of the rice seedbed became faster. However, the cropping system of the rice after barley was rapidly fallen from 83.7% to 4.0% in 1990s. Furthermore, the food production and the rate of arable land utilization were also rapidly fallen. 3. The most prospective cropping system is considered the soybean after barley, and root & tuber crops considering with the soil environment. 4. The expecting income of cropping system ranged from 940,000won to l,970,000won per 10a but that of barley after soybean cropping for 610,000won, and that of barley-after mung bean cropping for 613,000won. 5. The maintenance and the preservation of agricultural environment shall become positive by practicing the Integrated Nutrients Management(INM), and the Integrated Pest Management(IPM) with control using of fertilizer and pesticide presenting the excessive loads to the soil environment.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.68-73
• /
• 2023

Smoke masks have attracted great interests and have been supplied widely for the improvement of the safety during fire evacuation. However, there is not sufficient research on the practical utility, certification status and easy-donning about commercial smoke masks, therefore it is difficult to determine the actual usefulness of the smoke masks. In this study, we conducted a survey on users' perceptions and experiences about the smoke masks, and investigated the status of certification of 54 commercial smoke masks. We also performed donning tests and examined degrees of discomfort for 4 types of the smoke masks. Although 22% of 235 respondents had experienced the smoke masks before the test, and 23% of the respondents did not know the smoke masks, 93% of the respondents expected that the smoke masks could protect users from fire smokes and toxic gases. It was found that 41% of the commercial smoke masks did not certify according to domestic or overseas performance standards. Most certification standards have not effectively regulated maximum wearing time for the smoke masks. Only ASTM E 2952 and KFIS 024 had specific standards for the maximum wearing time of 30 s. As a result of donning tests for 4 types of smoke masks, the wearing time of the hood-type mask and self-contained smoke mask exceeded 30 s, therefore these types of smoke masks might increase the required safe evacuation time. On the other hand, it was also found that short education about the donning could reduce the wearing time by 19% and numbers of improper wearing by 89%.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.177-185
• /
• 2022

In this study, the economic feasibility of a local energy facility that uses forest biomass as an energy source was assessed. We analyzed profitability using data from the Forest Energy Self-sufficient Village Project financed by the Korea Forest Service. The energy facility has a cogeneration generator and wood chip boiler. Wood chip, which has lower heat value and is cheaper than wood pellets, is used as fuel. Revenue comes from the sale of electricity, heat, and renewable energy certificates. Additionally, we considered the sale of carbon credits as substitutes for fossil fuels. The expenditure consists of fuel costs and fixed costs, and the initial investment is treated as a sunk cost. Under the condition of a 55% operation rate and wood chip price of 95,000 KRW per ton, the annual net revenue is positive. Crucial factors for managing the facility sustainably are operation rate and fuel cost. A simulation in which two factors were changed showed that the annual net revenue is negative with a 50% operation rate and 100,000 KRW per ton of wood chip price. To improve net revenue, an increase in the operation rate or a decrease in the wood chip price is required. Additionally, selling carbon credits will make the operation of the facility more profitable. Furthermore, the payment required to procure wood chips could contribute to the rural economy. To foster the use of forest biomass for energy, the price for heat supplied from renewable energy sources should be subsidized.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.183-190
• /
• 2006

Minimizing the self weight of long-span deck slabs is one of the key factors for the practical and economic design of a composite two-girder bridge. In this paper, the minimum design thickness and rebar details of prestressed concrete deck slabs for composite two-girder bridges with girder span length from 4 m to 12 m are studied based on the safety and serviceability. The bridge deck slab with minimum thickness is designed as a one-way slab considering orthotropic behavior. Then fatigue safety of the deck slab is examined. Serviceability requirements for the deck slab such as deflection and crack width limits are also examined. The result shows that rebars with diameter less than 16 mm is recommended for the improved fatigue behavior, and, for the deck slab with span length longer than 8 m, the deflection limit governs the minimum design thickness. The result also shows that, for the deck slab with span length longer than 4 m, the distribution rebar requirement in the current Korea Highway Bridge Design Code is not sufficient to maintain the structural continuity in bridge axis as expected from the deck slab with span length shorter than 3 m.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.2 no.2
• /
• pp.81-95
• /
• 2022

The core of this study is to develop an edutech utilization program to be applied to 5th grade students by utilizing school curriculum time, and the conclusions based on the results of the study are as follows. First, for the development of future educational programs using edutech, a content preference survey was conducted and significant responses were confirmed from 27 teachers and 216 students, excluding missing values. In the future education implementation, UCC (video shooting, editing, etc.) and work activities (3D pen, 3D printer, etc.) were selected based on the need for separate edtech devices. Second, in order to develop a future education program using edutech, the future education class module was set in 4 stages based on previous research. First of all, in Make a foundation, theories by subject are developed, and in Open an activity, future education experience activities using key edutech are developed. In Organize evaluation, individual self-evaluation was conducted, and based on this, customized in-depth supplementary activities were conducted in Act individually. Third, in order for future education programs using edutech to be organized in the regular curriculum, sufficient connectivity with the curriculum must be secured. The basis for systematic and stable research was prepared by analyzing the curriculum of the 5th grade subject of the study and securing hours in connection with creative experiential activities. The data developed through this process were modified and supplemented based on the content validity test. The fact that the program application and verification steps were not performed is a limitation of this study, but it is expected that this program will expand the possibility of future education practice in the school field.

• Journal of Pharmacopuncture
• /
• v.27 no.1
• /
• pp.27-37
• /
• 2024

Objectives: Posttraumatic stress disorder (PTSD) is a prevalent mental health condition, and techniques using sensory stimulation in processing traumatic memories have gained attention. The Emotional Freedom Techniques (EFT) is a psychotherapy that combines tapping on acupoints with exposure to cognitive reframing. This pilot study aimed to assess the feasibility of EFT as a treatment for PTSD by answering the following research questions: 1) What is the compliance and completion rate of patients with PTSD with regard to EFT protocol? Is the dropout rate reasonable? 2) Is the effect size of EFT protocol for PTSD sufficient to justify a future trial? Methods: Thirty participants diagnosed with PTSD were recruited. They received weekly EFT sessions for five weeks, in which they repeated a statement acknowledging the problem and accepting themselves while tapping the SI3 acupoint on the side of their hand. PTSD symptoms were evaluated using the PTSD Checklist for DSM-5 (PCL-5) before and after the intervention. Results: Of the 30 PTSD patients (mean age: 34.1 ± 9.1, 80% female), 96.7% showed over 80% compliance to the EFT sessions, and 86.7% completed the entire study process. The mean PCL-5 total score decreased significantly after the intervention, with a large effect size (change from baseline: -14.33 [95% CI: -19.79, -8.86], p < 0.0001, d = 1.06). Conclusion: The study suggests that EFT is a feasible treatment for PTSD, with high session compliance and low dropout rates. The effect size observed in this study supports the need for a larger trial in the future to further investigate EFT as a treatment for PTSD. However, the lack of a control group and the use of a self-rated questionnaire for PTSD symptoms are limitations of this study. The findings of this pilot study can be used to plan a future trial.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.3
• /
• pp.70-88
• /
• 2024

Syenite is the name of a rock that has been used since ancient Roman period, but it is not widely distributed worldwide, and cases of its use as a material for Korean stone cultural heritages are very rare. However, the Three-story Stone Pagoda in Beomhak-ri of Sancheong, is composed of syenite, and each stone property has very similar rock phases, mineral compositions, grain sizes, colors and magnetic susceptibilities, indicating that they are all stones of the same rock series. Outcrops of syenite are relative widely distributed in the Beomhak-ri area, and it was mined for use as building stones until recently. This rock is almost identical in overall colors, occurrences, and mineralogical and petrological characteristics to that of the stone pagoda, and the geochemical evolution trends of the rocks are also very similar. In addition, numerous quarrying traces were identified in the same rock around the Beomhaksaji Temple site. In this way, the original stone properties of the Beomhak-ri Stone Pagoda were determined to be syenite because precise petrological and geochemical analysis and provenance interpretation was possible, the syenite was distributed around the temple site, and ancient quarrying traces were scattered in the same rocks. Therefore, it can be interpreted that the Beomhak-ri Stone Pagoda was processed and constructed using self-sufficient stone materials from the temple site area.

• Journal of Industrial Convergence
• /
• v.22 no.7
• /
• pp.15-21
• /
• 2024

A hiking stick is generally one of the walking aids that allow hikers to walk while relying on their own bodies when walking. A rechargeable battery must be built into the hiking stick, which is an auxiliary device, in order to perform various functions. A separate power supply is required to charge the rechargeable battery. This study is about a self-generated power supply and develops a power generation device using a screw with higher power generation efficiency than the existing method. It is differentiated from the method suggested in this study by comparing and analyzing it with the existing power generation method, and identifying problems therewith. The screw-type power generation device generates power when the climbing stick comes into contact with the ground and when it is separated from the ground. The built-in power generation device does not require a separate power supply, and it can be used by attaching the role of a mobile phone auxiliary battery and a lighting lamp, and it has the effect of being able to find it through location tracking by embedding a GPS sensor, etc., and using lighting to keep the user safe in emergency situations such as distress. The existing generator with built-in mountain climbing stick is difficult to charge due to very weak current and low practicality, but the generator developed in this research could achieve high efficiency to obtain a sufficient current, so it is possible to charge a battery and practicality.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.39-52
• /
• 2024

As the 'Eco-friendly conversion project for Port's CHE(Cargo handling Equipment) ' which has started in 2014 ends in 2024, in addition to the existing 'Low pollution' paradigm to respond to fine dust problems, a full-fledged 'Zero-emission' conversion is to be required to implement 2050 carbon neutrality at the port level. Accordingly, this study calculated the future replacement demand for container handling equipments at the four major domestic ports(Busan, Incheon, Yeosu Gwangyang, and Ulsan), and assumed a scenario where every CHE supposed to eb replaced is electrified inturn every year. And then the resulting future emission reduction effect accordingly was calculated and analyzed. In particular, compared and analyzed the emission outlook applying the life-cycle concept(LCA), which is being adopted as a new emission calculation standard in most industrial fields, and the existing emission calculation concept that only considers direct emissions within the port, to provide more effective implications for the promotion of follow-up conversion projects. According to the analysis results, if the CHE is replaced according to the proposed schedule, it is expected that the existing emissions can be reduced by 79% compared to BAU in 2025 and 97.4% in 2030. However, if the LCA is applied, it is expected to be reduced by only 27.6% by 2030. This suggests that port's CHE must be converted to zero emissions and at the same time establish an Ports' self-sufficient energy grid based on renewable energy.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.645-650
• /
• 2011

Pear cultivar 'Supergold' (Pyrus pyrifolia var. culta Nakai) was originated from the cross between 'Chuwhangbae' and 'Manpungbae' with the aims of improving the fruit quality of 'Chuwhangbae' cultivar at Pear Research Station of National Institute of Horticultural & Herbal Science, Rural Development Administration in 1994. 'Supergold' was preliminarily selected in 2002 and named in 2008. The tree shows a vigorous growth habit and semi-spread characters like as 'Manpungbae'. Furthermore, it has sufficient flowers and carries abundant pollen grains, so it can also be used as a pollinator. 'Supergold' is highly resistant to black leaf spot (Alternaria kikuchiana) in the field condition. The optimum harvest time is around Sep. 11th, which is ahead of 'Whangkeumbae' about 5 days in the harvest period. The fruit shape is oblate and fruit skin color is greenish-white at harvesting time. The average weight of fruit is 570 g, and the soluble solids content is $13.6\;^{\circ}Brix$. The flesh is very soft and juicy, and renders good eating quality. Shelf life is about 6 months under the cold storage condition. To determine the self-incompatibility (SI) genotype of 'Supergold' pear cultivar, it was crossed with other cultivars of which SI genotypes have already known. The result of cross-pollinations of 'Supergold' with other cultivars showed relatively high rates of fruit set from 64.5% to 91.0%, except for the cross with pollens of 'Nijisseiki' that represented only 28.8% of fruiting rate. Although sometimes the stigma of 'Supergold' crossed with 'Hayatama', 'Chojuro', and 'Nijisseiki' showed malformed pollen tube tips, 'Supergold' is generally supposed to have cross-compatibility with all other pollen donor cultivars. It is considered that the S-allele of 'Supergold' is $S_3S_4$, which is based on the result of PCR-RFLP.